Contact Us For Price
SPECS SUMMARY
Minimum Rating | 3520 ekW (4400 kVA) |
Maximum Rating | 3640 ekW (4550 kVA) |
Frequency | 50 Hz or 60 Hz |
Speed | 1000 rpm (50 hz) or 900 rpm (60 hz) |
Specifications
Minimum Rating | 3520 ekW (4400 kVA) |
Maximum Rating | 3640 ekW (4550 kVA) |
Frequency | 50 Hz or 60 Hz |
Speed | 1000 rpm (50 hz) or 900 rpm (60 hz) |
Aspiration | Turbocharged-Aftercooled |
Bore | 11 in (280 mm) |
Stroke | 11.8 in (300 mm) |
Displacement | 13546 in³ (222 l) |
Governor Type | Electronic |
Fuel System | EUI |
Length | 316.5 in (8040 mm) |
Width | 77.2 in (1961 mm) |
Height | 155 in (3937 mm) |
Weight - Estimated | 25000 lb (11340 kg) |
Compression Ratio 50 Hz | 13.1 |
Compression Ratio 60 Hz | 13:1 |
Engine Model | Vee 12, 4-Stroke-Cycle Diesel |
Emissions/Fuel Strategy | EPA Tier 2, IMO II |
Benefits and Features
CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing
Load feedback, Programmable droop, Adjustable gain, Adjustable fuel/air ratio control, Histograms of engine operation, Cat Messenger display presents diagnostics and other engine parameters
Engine speed, Boost pressure, Throttle position, Fuel consumption rate, Inlet manifold temperature, Diagnostic codes and events, Configuration, Desired engine speed, Battery voltage, Engine load, Lifetime totals — engine hours, fuel burned, idle fuel, idle hours, Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset
Interfaces with standard Cat® Marine Monitoring System (PLC in Price List), Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection
“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required
Standard Equipment
- Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
- Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
- Engine coolant water drains
- Dry, gas tight, exhaust manifold
- Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
- Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
- Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature