Cat® H130 GC S Hydraulic Hammer | Cat Hammer | Hydraulic Hammer
![Cat GC and GC S Hammers | Hammers at Work](https://img.youtube.com/vi/-bzbgIQHk_c/default.jpg)
![Cat Hammers | Silenced vs. Non-silenced](https://img.youtube.com/vi/yk7rDUcf4UY/default.jpg)
![Cat Hammers | Bad Operating Techniques, Costly Repairs](https://img.youtube.com/vi/lf9Mk-R5uG4/default.jpg)
![Cat Hammers | Bigger Hammers Aren't Always Better](https://img.youtube.com/vi/VLX4POzjfe4/default.jpg)
![Cat Hammers | Choosing the Right Hammer Tool](https://img.youtube.com/vi/7osAiqBjep8/default.jpg)
![Cat Hammers | Greasing Keeps Your Hammer Healthy](https://img.youtube.com/vi/m3IJ8-4HOAg/default.jpg)
![Cat Hammers | Proper Hammer Storage](https://img.youtube.com/vi/6vyd5EeMHAg/default.jpg)
![Cat Hammers | Protecting Your Investment](https://img.youtube.com/vi/kYeU4vHf4aI/default.jpg)
Contact Us For Price
SPECS SUMMARY
Blows per Minute | 350 to 700 |
Minimum Operating Weight | 5503 lb (2496 kg) |
Rated Flow - Minimum | 42 gal/min (160 l/min) |
Rated Flow - Maximum | 48 gal/min (180 l/min) |
Specifications
Blows per Minute | 350 to 700 |
Minimum Operating Weight | 5503 lb (2496 kg) |
Rated Flow - Minimum | 42 gal/min (160 l/min) |
Rated Flow - Maximum | 48 gal/min (180 l/min) |
Minimum Operating Pressure | 2320 psi (16000 kPa) |
Maximum Operating Pressure | 2610 psi (18000 kPa) |
Tool Shaft Diameter | 5.9 in (150 mm) |
Minimum Carrier Weight | 55115 lb (25 t) |
Maximum Carrier Weight | 70547 lb (32 t) |
Benefits and Features
- Automatic shutoff offers blank firing protection by stopping the piston when there is no material under the tool to help extend the life of the hammer.
- Manually adjust the piston speed by choosing between high piston speed or maximum power to help increase efficiency and production on the job site.
- The standard silencing feature allows you to use a GC S hammer on job sites in noise sensitive areas like neighborhoods or near hospitals where noise is regulated.
- The internal buffering system helps reduce machine vibration and increase noise suppression.
- Simple hammer design for easy maintenance and faster rebuilds to help lower owning and operating costs.
- Critical hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.
- Standard onboard autolube provides continuous greasing as the hammer runs, eliminating the need for manual greasing.
- The slip-fit lower bushing allows for easy replacement in the field, helping reduce service time.
- Verify the gas charge of the hammer without removing it from your machine.
- Quick and easy access to maintenance areas helps make hammer maintenance simple.
- Never waste time looking for your attachments again. Cat asset tracking is available on all hammers.
- Track your entire fleet of attachments and machines from one source. Hammers with asset tracking can be viewed within VisionLink®.
- Keep your assets secure. Hammers with an asset tracker send an alert if they leave an easy-to-set-up site boundary.