Cat H110Es Hydraulic Hammer Cat H110Es Hydraulic Hammer
Cat® Hammers DNA Cat® Hammers DNA
Request Info

SPECS SUMMARY

Impact Energy Class2000 ft·lbf (2712 J)
Blows per Minute450-1000
Minimum Operating Weight2095 lb (950 kg)
Maximum Operating Weight2381 lb (1080 kg)
Paired with your Cat excavator, the H110 S hammer is the ideal choice for quarries and demolition jobs, or in general construction where a breaker is needed for ground excavation.

Specifications

Impact Energy Class2000 ft·lbf (2712 J)
Blows per Minute450-1000
Minimum Operating Weight2095 lb (950 kg)
Maximum Operating Weight2381 lb (1080 kg)
Minimum Rated Flow16 gal/min (60 l/min)
Maximum Rated Flow32 gal/min (120 l/min)
Minimum Operating Pressure2176 psi (15000 kPa)
Maximum Operating Pressure2321 psi (16000 kPa)
Tool Shaft Diameter3.92 in (99.5 mm)
Minimum Carrier Weight24300 lb (11 t)
Maximum Carrier Weight39700 lb (18 t)

Benefits and Features

<ul><li>Hammer hits with consistent power, delivering constant production.</li><li>Operation cycle is more efficient – less waste in internal heat, more power delivered to the tool.</li><li>Piston and tool are matched in diameter and mass, greatly increasing efficiency in power transmission.</li><li>Blow frequency, hydraulic pressure and impact energy have been tuned to produce the highest possible work rates on Cat machines.</li></ul>

<li>No need for constant checking of the gas charge.</li> Design keeps gas pressure steady through the duration of the annual service interval.</li>
<li>All daily checks and routine service can be performed with the hammer attached to the machine.</li><li>Spend more time working and less time on service.</li> Greasing can be performed quickly from one standing-height grease point.</li><li>Service the lower bushing in the field using simple hand tools.</li>
<li>Lower bushing is rotatable – more service life lower parts cost.</li>
<li>Optional on-board autolube provides continual greasing as the hammer runs, protecting your investment.</li><li>Available for extreme environments, the optional wear package protects the hammer housing from damage.</li></ul>

<li>Auto shut off prevents blank firing, the leading cause of user-induced damage to hammers.</li><li>On a Next Gen Cat Excavator, hammers are protected by Auto-Stop, preventing damage from over-hammering in a single spot.</li><li>This feature helps prevent damage to your machine and premature damage to your hammer, even with inexperienced operators
<li>Performance Hammers lead in both operator comfort and machine protection.</li> The buffering system qualitatively dampens vibration to the machine due to proprietary buffering material.</li> <li>Can be configured for joystick or foot pedal control to suit your operating preference.</li></ul>

<ul><li>All models include Product Link technology standard, you can locate the hammer via the Cat App on your phone.</li><li>When paired with a Next Gen Cat excavator, the hammer is automatically recognized and configured
<li>Cat hammer dimensions are included in Cat E-Fence technology – protects the cab, and keeps the hammer in safe areas on the job site.</li><li>Hammer pressure and flow controls can be monitored and configured via the in-cab monitor – manually or automatically.</li></ul>