MP324 Demolition Jaw










Contact Us For Price
SPECS SUMMARY
Cycle Time - Open | 1.8 s (1.8 s) |
Excavator Minimum | 24 tons |
Cycle Time - Close | 1.2 s (1.2 s) |
Excavator Maximum | 35 tons |
Specifications
Cycle Time - Open | 1.8 s (1.8 s) |
Excavator Minimum | 24 tons |
Cycle Time - Close | 1.2 s (1.2 s) |
Excavator Maximum | 35 tons |
Crushing Force - Primary Cutter | 423 Sh Ton (3767 kN) |
Crushing Force - Cutter Tip | 189 Sh Ton (1684 kN) |
Crushing Force - Tooth Tip | 131 Sh Ton (1166 kN) |
Jaw Circuit - Max. Oil Pressure | 350 bar (5076 psi) |
Jaw Circuit - Max. Oil Flow | 59 gal/min (225 l/min) |
Rotation Circuit - Max. Oil Pressure | 140 bar (2031 psi) |
Rotation Circuit - Max. Oil Flow | 40 l/min (11 gal/min) |
Jaw Depth | 29.8 in (756 mm) |
Cutter Length | 7.5 in (191 mm) |
Jaw Opening - Maximum | 35.6 in (903 mm) |
Jaw Width - Fixed | 5.2 in (132 mm) |
Jaw Width - Moveable | 5.2 in (132 mm) |
Length | 81.9 in (2079 mm) |
Height | 62.7 in (1593 mm) |
Width | 31.2 in (793 mm) |
Benefits and Features
- New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
- You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
- Maximum crushing/cutting force is applied as soon as the jaw contacts material.
- Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
- Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
- Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.
- Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
- Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
- MP324 accepts these jaw types:
- Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
- Demolition – opens wide to crack the largest concrete structures
- Pulverizer – crushes concrete, separating the rebar
- Secondary Pulverizer – crushes concrete into finer particles; total rebar separation
- Shear – cuts structural steel, pipe, and cable
- Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
- Universal – innovative design cuts steel and crushes concrete
- Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
- Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
- Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.