MP318 Pulverizer Jaw
Cat® Multi-Processors | Pulverizer Jaw
Cat® Multi-Processors | Housing
Cat® Multi-Processors | Introduction to Multi-Processors
Cat® Multi-Processors | MP300 Series Multi-Processors
Cat® Multi-Processors | How to Change Jaws in 15 Minutes
Cat® Multi-Processors | SpeedBooster Technology
Cat® Multi-Processors | Productivity
Cat® Multi-Processors | Reliability
Cat® Multi-Processors | Versatility
Cat® Multi-Processors | Power and SpeedContact Us For Price
SPECS SUMMARY
| Cycle Time - Open | 1.6 s (1.6 s) |
| Excavator Minimum | 18 tons |
| Cycle Time - Close | 1 s (1 s) |
| Excavator Maximum | 25 tons |
Specifications
| Cycle Time - Open | 1.6 s (1.6 s) |
| Excavator Minimum | 18 tons |
| Cycle Time - Close | 1 s (1 s) |
| Excavator Maximum | 25 tons |
| Crushing Force - Primary Cutter | 289 Sh Ton (2570 kN) |
| Crushing Force - Cutter Tip | 127 Sh Ton (1131 kN) |
| Crushing Force - Tooth Tip | 88 Sh Ton (781 kN) |
| Jaw Circuit - Max. Oil Pressure | 5076 psi (350 bar) |
| Jaw Circuit - Max. Oil Flow | 40 gal/min (150 l/min) |
| Rotation Circuit - Max. Oil Pressure | 2031 psi (140 bar) |
| Rotation Circuit - Max. Oil Flow | 11 gal/min (40 l/min) |
| Jaw Depth | 26.2 in (666 mm) |
| Cutter Length | 7.9 in (200 mm) |
| Jaw Opening - Maximum | 32.4 in (824 mm) |
| Jaw Width - Fixed | 18.9 in (480 mm) |
| Jaw Width - Moveable | 11.8 in (300 mm) |
| Length | 79 in (2006 mm) |
| Height | 51.5 in (1307 mm) |
| Width | 31.2 in (793 mm) |
| Weight - Housing, Jaw and Bracket | 4592 lb (2083 kg) |
| Weight - Jaw Only | 1922 lb (872 kg) |
Benefits and Features
- New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
- You'll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there's no load.
- Maximum crushing/cutting force is applied as soon as the jaw contacts material.
- Process more per hour, ship more per shift, make more money every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
- Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
- Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.
- Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
- Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
- MP318 accepts these jaw types:
- Concrete Cutter - outer jaw cracks concrete; inner shear jaw cuts steel
- Demolition - opens wide to crack the largest concrete structures
- Pulverizer - crushes concrete, separating the rebar
- Shear - cuts structural steel, pipe, and cable
- Universal - innovative design cuts steel crushes concrete
- Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
- Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
- Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.