P232 Secondary Pulverizer | Pulverizer | Crusher
Contact Us For Price
SPECS SUMMARY
Cycle Time - Open | 1.9 s (1.9 s) |
Cycle Time - Close | 1.4 s (1.4 s) |
Crushing Force - Primary Cutter | 479 Sh Ton (4265 kN) |
Crushing Force - Tip | 153 Sh Ton (1360 kN) |
Specifications
Cycle Time - Open | 1.9 s (1.9 s) |
Cycle Time - Close | 1.4 s (1.4 s) |
Crushing Force - Primary Cutter | 479 Sh Ton (4265 kN) |
Crushing Force - Tip | 153 Sh Ton (1360 kN) |
Crushing Force - Primary Tooth | 252 Sh Ton (2240 kN) |
Jaw Circuit - Max. Oil Pressure | 4786 psi (33000 kPa) |
Jaw Circuit - Max. Oil Flow | 95 gal/min (360 l/min) |
Jaw Depth | 36.6 in (930 mm) |
Cutter Length | 7.9 in (200 mm) |
Jaw Opening - Maximum | 50.4 in (1280 mm) |
Jaw Width - Fixed | 26.4 in (670 mm) |
Jaw Width - Moveable | 15 in (380 mm) |
Length | 117.9 in (2995 mm) |
Height | 69.1 in (1755 mm) |
Width | 26.4 in (670 mm) |
Weight - Housing, Jaw and Bracket | 7628 lb (3460 kg) |
Excavator Minimum | 32000 kg (70500 lb) |
Excavator Maximum | 50000 kg (110200 lb) |
Benefits and Features
- Cat pulverizer jaws are designed to cut through material quickly to enhance your machine’s overall operating efficiency and help reduce fuel consumption.
- The oversized cylinder on the non-rotating secondary pulverizer delivers a strong crushing force to reduce concrete and separate rebar.
- The Speed Booster valve actively balances speed and power, delivering fast cycle times and strong closing force to help increase productivity.
- Replaceable wear parts can be swapped quickly in the field and do not require surface welding to help reduce service time.
- Daily wear parts inspection and grease points are accessible from the ground with the pulverizer still mounted on the machine.
- Safely perform maintenance with easy access through one inspection panel.
- Hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.
- Cat pulverizers are manufactured with high-strength, abrasion-resistant steel, especially in excessive wear areas.
- Reinforced cylinder rod hinges on the moveable jaw are designed to help boost durability and life of the pulverizer.
- The C-shaped cylinder guard provides extra protection against concrete demolition.
- Cat pulverizers have a versatile use across demolition applications, making them your choice for a wide variety of job sites.
- Never waste time looking for your attachments again. Cat asset tracking is available on all pulverizers.
- Track your entire fleet of attachments and machines from one source. Pulverizers with asset tracking can be viewed within VisionLink®.
- Keep your assets secure. Pulverizers with an asset tracker send an alert if they leave an easy-to-set-up site boundary.
- Share pulverizers and other attachments of the same size class across multiple machines by adding a quick coupler.
- Significantly reduce the time it takes to switch attachments when using a quick coupler.
- Quick couplers add a new level of safety to your job site with the ability to switch attachments while the operator stays in the cab with built-in redundancies to keep your attachments secure in the event of a pressure loss.
- A variety of couplers are available to suit your specific needs:
- Cat Pin Grabber Couplers – dedicated pin system
- CW Dedicated Couplers – wedge-style, dedicated system
- S Type Couplers – wedge-style, dedicated system
- Hydraulic Connecting CW Couplers – hydraulic connecting version of the CW coupler with instant hydraulic capability upon connection
- Hydraulic Connecting S Type Couplers – hydraulic connecting version of the S type coupler with instant hydraulic capability upon connection