S3015 Rotating Scrap & Demolition Shear
Cat® Shears | Introduction to Scrap and Demolition Shears
Cat® Shears | Serviceability
Cat® Shears | Hitchcock Testimonial
Contact Us For Price
SPECS SUMMARY
| Weight - Boom Mount | 3331 lb (1511 kg) |
| Weight - Stick Mount | 3234 lb (1467 kg) |
| Length | 105 in (2677 mm) |
| Height | 36.2 in (920 mm) |
Specifications
| Weight - Boom Mount | 3331 lb (1511 kg) |
| Weight - Stick Mount | 3234 lb (1467 kg) |
| Length | 105 in (2677 mm) |
| Height | 36.2 in (920 mm) |
| Width | 25.2 in (640 mm) |
| Jaw Width - Fixed | 12 in (304 mm) |
| Jaw Width - Moving | 3.9 in (100 mm) |
| Jaw Opening | 15.7 in (400 mm) |
| Jaw Depth | 15 in (380 mm) |
| Throat Force | 273 ton-f (2425 kN) |
| Apex Force | 130 ton-f (1155 kN) |
| Tip Force | 69 ton-f (618 kN) |
| Cutting Circuit - Maximum Relief Pressure | 5075 psi (35000 kPa) |
| Cutting Circuit - Maximum Flow | 33 gpm (125 L/min) |
| Rotation Circuit - Maximum Relief Pressure | 2030 psi (14000 kPa) |
| Rotation Circuit - Maximum Flow | 11 gpm (40 L/min) |
| Stick Mounted - Minimum | 12 tons |
| Stick Mounted - Maximum | 18 tons |
| Boom Mounted - Maximum | 10 tons |
| Boom Mounted - Minimum | 7 tons |
| Cycle Time - Close | 2 Seconds |
Benefits and Features
- More productive by design. Shears are designed as a system solution to cut more tons per day and make you more money by balancing machine capabilities, shear cylinder size, jaw depth and opening, and leveler arm length.
- Increase cut efficiency by up to 15 percent and reduce blade wear with the dual offset apex jaw design.
- Accurately place the jaws in optimum cutting position without moving the machine with the standard 360° rotator on the S3000 Series.
- Power is consistent through the entire cutting cycle.
- The shears are optimized for Cat excavators to ensure proper matching, optimal cycle times, and range of motion.
- Increase cutting efficiency with tapered spacer plates which reduce jamming and drag.
- The cylinder rod is completely protected inside the frame reducing downtime and the risk of damage and allowing for a slimmer design for better visibility.
- The jaw relief area allows material to fall away freely without hindering the next cutting cycle.
- Reduce maintenance costs with the new Bolt-on Piercing Tip. Dowels protect the bolts from stress that leads to loosening and a bushing equalizes force on both halves of the tip to help prevent splitting.
- Work confidently with demanding hydraulic requirements. Major hydraulic components are built with a 4 to 1 safety factor and can withstand pressure spikes up to 20,000-psi (1378 bar).
- Increase overall durability with the solid plate construction of the upper jaw.
- The housing is designed with a 60 percent safety factor in yield strength and high-stress areas are built with extra thick plates.
- The heel plate is constructed of AR400 high-wear resistant material to provide long life between weld build up and replacement.
- Endure high forces with confidence with the oversized torque tube.
- Easily and safely complete maintenance tasks. Shears can be greased at ground level along with the machine stick cylinder pin and boom pin.
- Reduce downtime with field serviceable swivels. Removing and resealing can be done quickly and easily while the shear is mounted to the machine, without the need to take it to a shop.
- Service and adjust the pivot group without the need for any special tools. The side play can be easily adjusted by simply tightening the pin.
- Easily change the tip and flip the blade in thirty minutes with standard tools.
- Access the cylinder’s hoses and speed valve easily from the side of the shear. This feature eliminates the need for a cover that can fall off and need repaired.
- You are supported. The Cat Dealer Network is your one point of contact for all your service needs.
- Connecting your shear to a variety of machines has never been easier. Dual high-pressure ports allow the shear to attach to any compatible machine regardless of the hydraulic layout.
- Meet your specific needs with straight and rotating configurations and boom and stick mount options.
- Straight – S2000 Series
- Boom mounted
- Used in secondary demolition and scrap applications
- Rotator is eliminated, reducing maintenance costs
- Larger shears can be used on smaller machine size classes
- Rotating – S3000 Series
- Boom or Stick mounted
- Used in scrap, primary, and secondary demolition applications
- Provides optimal cycle times and positioning
- Boom Mounted – Ideal for scrap applications, boom mounted shears allow for easier handling and operation.
- Stick Mounted – Ideal for demolition applications, stick mounted shears are compatible with larger machines and provide a greater reach.
- Straight – S2000 Series