TRS6, S40/S40, 5-6 Ton Mini Excavators

« Go back to Tilt Rotate Systems
Cat® Tiltrotator System Cat® Tiltrotator System
Cat® Tiltrotator System Overview Cat® Tiltrotator System Overview
Cat® TRS Tiltrotator Display and Settings Cat® TRS Tiltrotator Display and Settings
Cat® TRS6 Tiltrotator and Bucket at Work Cat® TRS6 Tiltrotator and Bucket at Work
Cat® TRS6 Tiltrotator and Grapple at Work Cat® TRS6 Tiltrotator and Grapple at Work
Advantages of the Cat® TRS8 Tiltrotator Advantages of the Cat® TRS8 Tiltrotator
Cat® TRS8 Tiltrotator at Work Cat® TRS8 Tiltrotator at Work
The Cat® TRS Tiltrotator The Cat® TRS Tiltrotator
Cat® 306 Mini Excavator with Cat TRS6 Tiltrotator Cat® 306 Mini Excavator with Cat TRS6 Tiltrotator
An Attachment for Every Job - Cat® Work Tool Attachments An Attachment for Every Job - Cat® Work Tool Attachments
Request Info

Contact Us For Price

SPECS SUMMARY

Machine Class 5-6 Ton Mini Excavators
Weight 463 lb (210 kg)
Interface Options: Top-Bottom S40 Coupler / S40 Coupler
Overall Height 32.2 in (819 mm)
Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.

Specifications

Machine Class 5-6 Ton Mini Excavators
Weight 463 lb (210 kg)
Interface Options: Top-Bottom S40 Coupler / S40 Coupler
Overall Height 32.2 in (819 mm)
Length 20.7 in (526 mm)
Overall Width 19.3 in (490 mm)
Rotation Speed 7 Seconds per 1 Full Rotation
Tilt Angle Range 40° Left/Right
Maximum Bucket Capacity 8.8 ft³ (250 l)
Maximum Bucket Width 47.2 in (1200 mm)
Optimal Hydraulic Flow 45-80 L/min (12-21 gpm)
Maximum Operating Pressure 3625.9 psi (25000 kPa)
Required Hydraulics 1st Auxiliary
Tilting Torque 10627 lb/ft (14408.3 N·m)
Turning Torque 2876.5 lb/ft (3900 N·m)
Compatibility Only compatible with the following Mini Excavator model serial number prefixes: 306 CR (6G6 1 & up)

Benefits and Features

Provides optimal control of your work tools to provide greater flexibility.

A single point of entry for grease allows the entire unit to be greased quickly and easily.

Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.

A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.

Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.

Valves sustain holding pressures and prevent cylinder movement under load constraints.

The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.

Used to pick up objects such as pipe and debris.

LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.