Request Info

SPECS SUMMARY

Net Power - SAE J134969 HP (52 kW)
Operating Weight - Maximum17637 lb (8000 kg)
Engine ModelCat C3.6
Cab - ROPS/FOPS359 lb (163 kg)
The Cat® 415 IL Industrial Loader delivers great performance, improved fuel efficiency, and a superior hydraulic system.

Specifications

Net Power - SAE J134969 HP (52 kW)
Operating Weight - Maximum17637 lb (8000 kg)
Engine ModelCat C3.6
Cab - ROPS/FOPS359 lb (163 kg)
Air Conditioning101 lb (46 kg)
Bore3.86 in (98 mm)
Stroke4.72 in (120 mm)
Displacement220 in³ (3.6 l)
Pump TypeVariable Flow, Axial Piston
Transmission - Power Shuttle - 4WD4 gal (US) (15 l)
Turning Circle - 2WD/4WD (inner wheel not braked) - Outside, Front Wheels26.8 ft (8.18 m)
TypeClosed Center
Standard Stick - MP Loader Bucket - 4WDno counterweight
System Pressure - Loader2973 psi (20500 kPa)
System Pressure - Hitch/Box Scraper2973 psi (20500 kPa)
Pump Capacity at 2,200 rpm33 gal/min (125 l/min)
Bore2.6 in (65 mm)
Stroke4.2 in (106 mm)
Rod Diameter1.6 in (40 mm)
Power SteeringHydrostatic
Axle Oscillation11°
TypeFront Wheel
Turning Circle - 2WD/4WD (inner wheel not braked) - Outside, Widest Loading Bucket36 ft (10.97 m)
Transmission - Power Shuttle - 2WD4 gal (US) (15 l)
Hydraulic System23.8 gal (US) (90 l)
Rear Axle4.4 gal (US) (16.5 l)
Cooling System with Air Conditioning4.4 gal (US) (16.5 l)
Rear Axle - Static50582 lb (22964 kg)
Standard Configuration of Front/Rear TiresFront: 12.5 80/16.9; Rear: 16.9-24
NoteRequires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur
Hydraulic Tank10.6 gal (US) (40 l)
Front Axle (4WD) - Planetaries0.2 gal (US) (0.7 l)
Engine Oil - With Filter2.3 gal (US) (8.8 l)
Front Axle (4WD)2.9 gal (US) (11 l)
Rear Axle - Planetaries0.4 gal (US) (1.7 l)
Fuel Tank42 gal (US) (160 l)
Power Shuttle Transmission - Standard - Forward - 1st3.4 mile/h (5.4 km/h)
Front Axle (4WD) - Dynamic13228 lb (6000 kg)
Operating Weight - Maximum - ROPS Capacity17637 lb (8000 kg)
EmissionsEngine meets U.S. EPA Tier 4 Final emission standards.
Net Peak Torque SAE J1349308 ft·lbf (418 N·m)
Gross Power - SAE J199575 HP (56 kW)
Net Peak Power - 2,200 rpm - SAE J134969 HP (52 kW)
Gross Power - ISO 1439674 HP (55 kW)
Net Torque Rise - 1,200 rpm86 % (86 %)
NoteNo derating required up to 2286 m (7,500 ft).
Rated Net Power - 2,200 rpm - SAE J134969 HP (52 kW)
Rated Net Power - 2,200 rpm - ISO 924969 HP (51 kW)
Net Peak Power - 2,200 rpm - ISO 924969 HP (51 kW)
MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks1642 lb (745 kg)
MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks2017 lb (915 kg)
Front Counterweight - Counterweights - Option 31015 lb (460 kg)
Front Axle (4WD) - Static26455 lb (12000 kg)
Rear Counterweight198 lb (90 kg)
Note*Specifications shown are for machine equipped with 0.76 m³ (1.0 yd³) general purpose loader bucket, 115 kg (255 lb) front counterweight, 80 kg (176 lb) operator, all wheel drive and full fuel tank.
Front Counterweight - Counterweights - Option 1255 lb (115 kg)
Front Counterweight - Counterweights - Option 2530 lb (240 kg)
Minimum Operating Weight14035 lb (6366 kg)
Power Shuttle Transmission - Standard - Reverse - 2nd5.5 mile/h (8.9 km/h)
Power Shuttle Transmission - Standard - Forward - 3rd13 mile/h (20 km/h)
Power Shuttle Transmission - Standard - Reverse - 3rd13 mile/h (20 km/h)
Power Shuttle Transmission - Standard - Reverse - 4th23 mile/h (36 km/h)
Power Shuttle Transmission - Standard - Forward - 4th23 mile/h (36 km/h)
Power Shuttle Transmission - Standard - Forward - 2nd5.5 mile/h (8.9 km/h)
Power Shuttle Transmission - Standard - Reverse - 1st3.4 mile/h (5.4 km/h)
Rear Axle - Dynamic20233 lb (9186 kg)
Standard Stick - GP Loader Bucket - 4WD255 lb (116 kg)

Benefits and Features

Ample legroom inside the cab makes rotating the seat simple. The Adjustable Mechanical Suspension seat provides comfort to the operator while roading.

The Cat Industrial Loader offers dual differential lock control. In adverse conditions, the operator has the option of engaging the differential lock from the floor mounted pedal or by using the push button on the loader joystick.

The Cat Industrial Loader offers finger lever pilot controls that require less operator effort. The 415 IL comes standard with a five function hydraulic valve for increased versatility.

The proven Cat C3.6 engine delivers solid performance, meets U.S. EPA Tier 4 Final/EU Stage V emission standards, and requires no diesel exhaust fluid (DEF).

The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Industrial Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.

A large portfolio of Attachments, including but not limited to assorted Buckets, Brooms, Snow Pushes and Brooms are for field installation.

Standard Equipment

  • Air cleaner
  • Alarm, back-up
  • Audible system fault alarm
  • Box Blade Controls, finger lever pilot
  • Battery, maintenance-free, 880 CCA
  • Battery disconnect switch
  • Brace, lift cylinder
  • Brake, secondary parking
  • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
  • Bucket level indicator
  • Canopy, ROPS/FOPS
  • Coat restraint
  • Coolant/antifreeze, extended life
  • Counterweight, bumper
  • Dome light (cab only)
  • Diagnostic port for engine
  • Differential lock, floor mounted
  • Differential lock, loader joystick
  • Drink holders, two
  • Engine, Cat C3.6, meets Tier 4 Final emission standards, diesel particulate filter
  • Engine enclosure, sound suppression removal panels
  • Face seals, O-ring
  • Fan, suction and guard
  • Fast reversing shuttle, all gears
  • Fenders, rear
  • Filters, spin-on: fuel, engine oil, transmission oil, water separator
  • Filters, bowl and cartridge: hydraulic fluid
  • Flashing hazards/signal lights
  • Floor mat
  • Fuel tank, fully enclosed
  • Fully hinged front grill for cooling package cleaning access
  • Gauge cluster: coolant temperature, fuel level, torque converter temperature, battery voltage
  • Ground level fuel fill
  • High ambient cooling package
  • Hitch, rear 3-point
  • Hood lock, inside cab
  • Hydraulic hose, Cat XT™-3
  • Hydraulic oil cooler
  • Hydraulic oil level sight gauge
  • Hydraulic valve, hydrostatic steering
  • Hydraulic valves, loader 3 function
  • Hydraulic valves, rear 5 function
  • Hydraulics, load sensing with variable displacement piston pump
  • Indicator lights and LCD warnings for system status
  • Instrument panel lights
  • Key start/stop system
  • LCD screen with machine system information
  • Lights, working (2 front, 2 rear)
  • Loader, self-leveling, return-to-dig and transmission disconnect switch
  • Loader, single tilt
  • Mirror, rearview
  • Open circuit breather
  • Power receptacle, 12 volt, 2 internal, 2 external roof mounted
  • Power steering, hydrostatic
  • Seat belt, retractable, 75 mm (3 in)
  • Steering knob
  • Seat, mechanical suspension, fabric or vinyl cover, with armrest
  • Starting system, glow plugs
  • Steering, hydrostatic
  • Storage compartment, lockable
  • Storage tray
  • Stop and tail lights
  • Tires, 12.5/80-18 front, 16.9-24 rear
  • Toolbox, external, lockable
  • Torque converter
  • Throttle, foot, electronic
  • Transmission, four speed, syncromesh
  • Transmission neutralizer switch
  • Transport tie-downs
  • Four Wheel Drive
  • Warning horn, electric
  • Product Link™, cellular, PLE643
  • Product Link, dual mode, PLE683

Optional Equipment

  • Battery, additional, 880 CCA
  • Box, blade/scarifier
  • Cab, standard with air conditioning
  • Cold weather fuel (–30° C/–22° F)
  • Cold weather package, including additional battery, engine block heater, radiator antifreeze (–50° C/–58° F), cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
  • Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
  • Counterweight, rear 90 kg (198 lb)
  • Dual tilt rear hitch
  • Face fan
  • Fenders, front with integral steps
  • Radio and CD player, Bluetooth®
  • Ride Control
  • Rotating beacon, magnetic mount
  • Security system keypad
  • Vandalism protection, gauge cover
  • Work Tool Attachments such as buckets, forks, and material handling arms. See your Cat dealer for more information.
  • LED lights, working (2 front, 2 rear)
  • Security system, Bluetooth
  • Security System, operator display
  • Side mirrors, cab, external
  • Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface