440 Backhoe Loader - Center Pivot

Cat® Backhoe Loader 440 and 450 Overview Cat® Backhoe Loader 440 and 450 Overview
Request Info

Contact Us For Price

SPECS SUMMARY

Net Power - SAE J1349104 HP (78 kW)
Dig Depth - Standard15.5 ft (4718 mm)
Operating Weight - Maximum29321 lb (13300 kg)
Cab - ROPS/FOPS359 lb (163 kg)
The Cat® 440 Backhoe Loader delivers improved machine performance, a superior hydraulic system, improved operator controls and ergonomics, and overall versatility.

Specifications

Net Power - SAE J1349104 HP (78 kW)
Dig Depth - Standard15.5 ft (4718 mm)
Operating Weight - Maximum29321 lb (13300 kg)
Cab - ROPS/FOPS359 lb (163 kg)
Air Conditioning101 lb (46 kg)
Bore4.13 in (105 mm)
Stroke5 in (127 mm)
Displacement268 in³ (4.4 l)
Pump TypeVariable Flow, Axial Piston
Transmission - Power Shuttle - 2WD4 gal (US) (15 l)
Transmission (Autoshift) - AWD, Autoshift4.8 gal (US) (18 l)
Cooling System with Air Conditioning4.4 gal (US) (16.5 l)
Fuel Tank42.3 gal (US) (160 l)
Cooling System with Cab Heater6 gal (US) (22.5 l)
Planetaries0.2 gal (US) (0.7 l)
Rear Axle4.4 gal (US) (16.5 l)
Transmission - Power Shuttle - 4WD4 gal (US) (15 l)
Front Axle (Center Housing)2.9 gal (US) (11 l)
Hydraulic System (Minimum)31.7 gal (US) (120 l)
Hydraulic System23.8 gal (US) (90 l)
Rear Axle - Planetaries0.4 gal (US) (1.7 l)
Engine Oil - With Filter2.3 gal (US) (8.8 l)
Hydraulic Tank (Nominal)14.3 gal (US) (54 l)
System Pressure - Backhoe3800 psi (26200 kPa)
Power Shuttle Transmission - Reverse 3rd13 mile/h (20 km/h)
TypeClosed Center
Autoshift Transmission - Forward - 5th16.7 mile/h (26.8 km/h)
Autoshift Transmission - Reverse - 2nd7.7 mile/h (12.4 km/h)
Power Shuttle Transmission - Forward 1st3.4 mile/h (5.4 km/h)
Autoshift Transmission - Forward - 2nd5.9 mile/h (9.5 km/h)
System Pressure - Hitch/Box Scraper2973 psi (20500 kPa)
Power Shuttle Transmission - Reverse 1st3.4 mile/h (5.4 km/h)
Power Shuttle Transmission - Forward 4th23 mile/h (36 km/h)
Rear Axle (Center Housing)4.4 gal (US) (16.5 l)
Rod Diameter1.65 in (42 mm)
Front Axle (4WD) - Planetaries0.2 gal (US) (0.7 l)
Front Axle, AWD - Dynamic20225 lb (9174 kg)
Hydraulic Tank10.6 gal (US) (40 l)
NoteNo derating required up to 2286 m (7,500 ft).
Standard Stick - GP Loader Bucket - 4WD255 lb (116 kg)
Standard Configuration of Front/Rear TiresFront: 12.5 80/16.9; Rear: 16.9-24
Net Peak Torque SAE J1349307 ft·lbf (416 N·m)
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket36 ft (10.97 m)
NoteRequires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur
EmissionsEngine meets U.S. EPA Tier 4 Final emission standards.
Turning Circle - (inner wheel not braked) - Outside Front Wheels26.8 ft (8.18 m)
Axle Oscillation11°
Front Axle (4WD) - Static50582 lb (22964 kg)
Rear Axle - Dynamic20225 lb (9174 kg)
Diesel Exhaust Fluid (DEF)5 gal (US) (19 l)
Rear Axle - Static50565 lb (22936 kg)
Front Axle (4WD) - Dynamic20233 lb (9186 kg)
Front Axle, AWD - Static50565 lb (22936 kg)
TypeFront Wheel
Power SteeringHydrostatic HMU
Turning Circle (inner wheel not braked) - Outside Widest Loader Bucket37.75 ft (11.5 m)
Bore3.35 in (85 mm)
NoteAWD cylinder, one (1) double-acting.
Turning Circle (inner wheel not braked) - Outside Front Wheels27.33 ft (8.33 m)
Stroke9.29 in (236 mm)
Autoshift Transmission - Forward - 3rd7.7 mile/h (12.4 km/h)
Front Axle (4WD)2.9 gal (US) (11 l)
Autoshift Transmission - Forward - 4th12.2 mile/h (19.6 km/h)
Autoshift Transmission - Reverse - 3rd16.7 mile/h (26.8 km/h)
Autoshift Transmission - Forward - 1st3.7 mile/h (5.9 km/h)
Net Peak Power - 1,800 rpm - SAE J134972 HP (54 kW)
Loader Bucket - 1.34 m³ (1.75 yd³) MP HD (Pin-On)+214 kg (+472 lb)
Cab, ROPS/FOPS+243 kg (+536 lb)
Loader Bucket - 1.34 m³ (1.75 yd³) MP ED (Hook-On)+160 kg (+353 lb)
MP Bucket (1.00 m3/1.31 yd3) - With Fold-Over Forks2018 lb (915 kg)
Operating Weight - Estimated*21544 lb (9772 kg)
Net Power Rating at 2,200 rpm - SAE J1349104 HP (78 kW)
Power Rating Conditions - No De-Rating Required Up To7500 ft (2286 m)
Net Torque Rise - 1,400 rpm44%
Rated Net Power - 2,200 rpm - ISO 924968 HP (51 kW)
Net Peak Power Rating - SAE J1349 at 2,100 rpm108 HP (80.7 kW)
Net Torque Rise - 1,400 rpm - SAE J1349360 ft·lbf (487 N·m)
Ratings at 2,200 rpm - Gross Power ISO 14396116 HP (87 kW)
MP Bucket (1.00 m3/1.31 yd3) - Without Fold-Over Forks3622 lb (1642 kg)
Engine ModelC4.4 ACERT 87 kW (116 hp) Electronic – Turbo Intercooled
Net Power Rating at 2,200 rpm - ISO 9249104 HP (78 kW)
Rated Net Power - 2,200 rpm - EEC 80/126969 HP (51 kW)
Gross Power - ISO 1439674 HP (55 kW)
Net Power - 2,200 rpm - SAE J134968 HP (51 kW)
Net Peak Power - 1,800 rpm - EEC 80/126973 HP (54 kW)
Net Torque Rise - 1,200 rpm88 % (88 %)
Net Peak Power Rating - ISO 9249 at 1,800 rpm108 HP (80.7 kW)
Gross Power - SAE J199574 HP (55 kW)
Ratings at 2,200 rpm - Gross Power SAE J1995118 HP (88 kW)
Net Peak Power - 1,800 rpm - ISO 924973 HP (54 kW)
Extendible Stick+301 kg (+664 lb)
Loader Quick Coupler+250 kg (+551 lb)
NoteTravel speeds of backhoe loader in two wheel drive at full throttle, when equipped with 500/70-24 rear tires.
Note (3)MP = Multi Purpose
Power Shuttle Transmission - Forward 2nd5.5 mile/h (8.9 km/h)
Power Shuttle Transmission - Reverse 4th23 mile/h (36 km/h)
Autoshift Transmission - Forward - 6th24.4 mile/h (39.2 km/h)
Pump Capacity at 2,200 rpm58.1 gal/min (220 l/min)
Power Shuttle Transmission - Reverse 2nd5.5 mile/h (8.9 km/h)
System Pressure - Loader3800 psi (26200 kPa)
Power Shuttle Transmission - Forward 3rd13 mile/h (20 km/h)
Autoshift Transmission - Reverse - 1st3.7 mile/h (5.9 km/h)
Rear Counterweight198 lb (90 kg)
Front Counterweight - Counterweights - Option 31015 lb (460 kg)
Dig Depth - Standard3 in (83 mm)
Note (5)ED = Extreme Duty
Front Counterweight - Counterweights - Option 1255 lb (115 kg)
Loader Bucket - 1.34 m³ (1.75 yd³) GP (Hook-On)–150 kg (–331 lb)
Loader Bucket - 1.53 m³ (2.0 yd³) GP (Pin-On)+80 kg (+176 lb)
Note (1)*Machine equipped with 340/80-18 front and 500/70-24 rear, AWD, OROPS, 1.34 m³ (1.75 yd³) general purpose bucket with bolt-on cutting edge, standard stick, 610 mm (24"") severe-duty backhoe bucket.
Loader Bucket - 1.34 m³ (1.75 yd³) MP ED (Pin-On)+290 kg (+639 lb)
Loader Bucket - 1.34 m³ (1.75 yd³) MP HD (Hook-On)+85 kg (+187 lb)
Backhoe Quick Coupler+87 kg (+192 lb)
Counterweight1102 lb (500 kg)
Operating Weight - Maximum - ROPS Capacity29321 lb (13300 kg)
Front Counterweight - Counterweights - Option 2530 lb (240 kg)
Note (4)HD = Heavy Duty
Loader Bucket - 1.53 m³ (2.0 yd³) GP (Hook-On)–73 kg (–162 lb)
Note (2)GP = General Purpose
Standard Stick - MP Loader Bucket - 4WDno counterweight

Benefits and Features

Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set. Variable Speed Steer reduces operator fatigue in applications, such as truck loading, by reducing the number of steering wheel rotations required to turn the machine. The new Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.

The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands. The advanced hydraulic system allows the operator to adjust Loader and Backhoe Auxiliary Flow matching attachment specifications, program Loader Bucket Kickout and Return to Dig, and Enable Parallel Lift.

The Cat C4.4 ACERT™ engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage IV emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The new Backhoe design and optimized Loader Linkage increases lift capacity and breakout forces on both ends of the machine. A redesigned Loader System provides superior machine balance and stability regardless of the ground conditions.

The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.

A variety of Mechanical and Hydraulic Cat Backhoe Couplers are available from the factory or for field installation. Options include, but not limited to, Dual Lock Pin Grabber Couplers and Pin Lock Couplers. Redesigned General Purpose and Multi Purpose Loader Buckets increase digging performance and improve bucket durability for long term value.

Standard Equipment

  • 4572 mm (15 ft) center pivot excavator style backhoe
  • Adjustable auxiliary flow controls, loader and backhoe
  • Air cleaner
  • Alarm, back-up
  • Alternator, 150 amp
  • Audible system fault alarm
  • Automatic Engine Speed Control (AESC)
  • Autoshift transmission with six (6) forward and three (3) reverse gears and neutral safety switch
  • Backhoe Safety Manual
  • Battery Box, external, lockable
  • Battery disconnect switch
  • Battery, maintenance-free, 1,000 CCA
  • Boom transport lock
  • Brace, lift cylinder
  • Brake, SAHR secondary parking
  • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
  • Canopy, ROPS/FOPS
  • Cat cushion swing system
  • CD-ROM Parts Manual
  • Coat restraint
  • Coolant/antifreeze, extended life
  • Counterweight, bumper, 500 kg (1,102 lb)
  • Diagnostic port for engine, machine and gauge cluster Electronic Control Modules
  • Differential lock, loader joystick
  • Dome light (cab only)
  • Engine enclosure, sound suppression removal panels
  • Engine, Cat C4.4 ACERT (Direct Injection Turbocharged), meets Tier 4 Final/Stage IV emission standards, selective catalyst reduction, diesel oxidation catalyst (DOC)
  • Face seals, O-ring
  • Fan, suction and guard
  • Fast reversing shuttle, all gears
  • Fenders, rear
  • Filters, bowl and cartridge: fuel, hydraulic fluid
  • Filters, spin-on: engine oil, transmission oil, water separator
  • Flashing hazards/signal lights
  • Floor mat
  • Four Wheel Drive/Brake Mode Selector
  • Fuel tank, fully enclosed
  • Fully hinged front grill for cooling package cleaning access
  • Ground level fuel fill and DEF fill
  • High ambient cooling package
  • Hood lock, inside cab
  • Hydraulic hose, XT™
  • Hydraulic oil cooler
  • Hydraulic oil level sight gauge
  • Hydraulic valves, backhoe six (6) function
  • Hydraulic valves, loader three (3) function
  • Hydraulics, load sensing with variable displacement piston pump and flow sharing valve
  • Indicator lights: hydraulic implement lockout, hydraulic filter bypass, water in fuel, operator presence, remote dial throttle active, air filter blocked, engine warning, machine locked (if equipped), warning lamp, emissions module malfunction, low battery/charging system warning, high hydraulic oil temperature; LCD warnings: engine oil pressure, service due, high coolant temperature, auto idle shutdown, high torque converter temperature
  • Instrument panel lights
  • Joystick controls: electrohydraulic controls with pattern changer valve
  • Key start/stop system
  • LCD operator screen
  • Lights, working (four [4] front, four [4] rear)
  • Loader joystick, self-leveling, return-to-dig, transmission disconnect switch, Forward/Neutral/Reverse Switch, MP Auxiliary roller
  • Loader, single tilt
  • Machine Security System integrated into LCD operator display
  • Mirror, rearview
  • One-touch low idle
  • Open circuit breather
  • Operations and Maintenance Manual
  • Pattern changer, in cab
  • Power receptacle, 12 volt, one (1) internal + one (1) USB, two (2) external
  • Product Link™
  • Radio ready (Cab)
  • Rubber impact strips on radiator guards
  • Seat belt, retractable, 51 mm (2 in)
  • Seat mounted controls
  • Seat, air suspension with armrest
  • Stabilizer pads, reversible
  • Stabilizers, electrohydraulic, auto-up function
  • Starting system, glow plugs
  • Steering knob
  • Steering, hydrostatic
  • Stop and tail lights
  • Storage compartment (Cab/Canopy), lockable
  • Storage tray, electronics and miscellaneous items
  • Swing transport lock
  • Throttle, hand and foot, electronic
  • Tilt steering wheel (Canopy), Tilt/telescoping (Cab)
  • Tire Valve Stem Protection
  • Tires
  • Torque converter
  • Transmission neutralizer switch
  • Transport tie-downs
  • Vandalism locks, four (4)
  • Vandalism protection, gauge cover (Canopy)
  • Warning horn, electric

Optional Equipment

  • Battery, additional, 1,000 CCA
  • Cab, deluxe with air conditioning
  • Cold weather fuel (–30° C/–22° F)
  • Cold weather package, including additional battery, engine block heater, radiator antifreeze, cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
  • Fenders, front with integral steps
  • Guard, boom protection plate
  • Guard, stabilizer, rock
  • Guard, stabilizer, stab leg bottom
  • Hydraulic lines, combined function auxiliary
  • Hydraulic valves, loader quick coupler
  • Lights, LED work lights, wide and spot
  • Loader, Quick Coupler
  • Quick Coupler, backhoe, hydraulic, dual lock
  • Quick Coupler, backhoe, manual, dual lock
  • Quick Coupler, backhoe, pin lock
  • Radio and CD player, Bluetooth®
  • Ride Control
  • Rotating beacon, magnetic mount
  • Seat belt, 75 mm (3 in)
  • Seat, heated
  • Stick, extendible
  • Transmission, Autoshift with lock-up torque converter
  • Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

Compare