Request Info

Contact Us For Price


Operating Weight - Standard Machine Empty22050 lb (10000 kg)
Operating Weight - Maximum Ballast59525 lb (27000 kg)
Compaction Width82 in (2090 mm)
Bore4.13 in (105 mm)
The CW34 is an eight wheel pneumatic roller that features a modular ballast system and flexible operating weight of 10 000 kg to 27 000 kg (22,050 lb - 59,525 lb). This machine offers excellent visibility, ECO-mode operation, even compaction, and excels on a variety of materials due to its flexible air-on-the-run capability.


Operating Weight - Standard Machine Empty22050 lb (10000 kg)
Operating Weight - Maximum Ballast59525 lb (27000 kg)
Compaction Width82 in (2090 mm)
Bore4.13 in (105 mm)
Stroke5 in (127 mm)
Turning Radius - Inside (2)20 ft (6.1 m)
Rolling Width82 in (2090 mm)
Water Spray Tank Capacity100 gal (US) (380 l)
Tires13/80 R20
Maximum Machine Height118 in (3000 mm)
Overall Length210 in (5350 mm)
Height - ROPS118 in (3000 mm)
Height - Steering Wheel96 in (2450 mm)
Overall Width85 in (2160 mm)
Engine ModelC4.4
Gross Power133 HP (98 kW)
Turning Radius - Inside (1)240 in (6100 mm)
Number of Wheels8
Travel Speed - Maximum12 mile/h (19 km/h)
Ground Clearance10 in (260 mm)
Turning Radius - Outside342 in (8700 mm)
Average Weight per Wheel - Maximum Ballast7451 lb (3380 kg)
Average Weight per Wheel - No Ballast2755 lb (1250 kg)
Operating Weight - Maximum Water Ballast28660 lb (13000 kg)
Operating Weight - No Ballast22050 lb (10000 kg)
Average Weight per Wheel3571 lb (1620 kg)
Operating Weight - Maximum Wet Sand Ballast35275 lb (16000 kg)
Fuel Tank Capacity71 gal (US) (270 l)

Benefits and Features

Compaction Width

Eight 13/80 R20 rubber tires provide overall compaction width of 2090 mm (82") with 25 mm (1") overlap.

Flexible Ballast

Ballast options include modular and non-modular steel, sand, and water. The 6.5 metric ton (7.1 U.S. ton) modular steel can be easily added or removed through bolt-on side panels. The internal, non-modular steel consists of 6.1 metric tons (6.7 U.S. ton). Also, a 3 cubic meter (793 gal) water-tight chamber with baffled compartments prevent surge, and balance weight.

Oscillating Tires

Oscillating front and rear tires deliver vertical and horizontal forces that reduce air voids, providing surface uniformity. Heat retention covers trap heat to keep the tires warm and prevent pick-up. They can be easily stored when not in use.


The 13/80 R20 rubber tires can be equipped with the optional air-on-the-run system that enables the operator to quickly adjust tire pressures to increase or decrease static loads for optimal surface quality.

Operating Environment

The sliding and pivoting operator station rotates 90° to either side for ultimate comfort and control. The new console design includes an LCD display and push button machine controls that simplify operation for an all-around comfortable operating environment.

Dual Infrared Temperature Sensors

Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.

Pass-Count Mapping

Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.

Temperature Mapping

Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.

C4.4 Engine

The C4.4 engine meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards and provides 98 kW (133.2 metric hp).


Standard ECO-mode provides fuel efficiency and reduces sound levels.