CONTACT US

Questions about new equipment?

First Name *

Last Name *

Phone *

Email *

Address

City *

State *

County *

Message

Call Us: 208-888-2287


D3

« Go back to Dozers
Introducing the Next Generation Cat® D1, D2 and D3 Small Dozers Introducing the Next Generation Cat® D1, D2 and D3 Small Dozers
Overview of the Next Generation Cat® D1, D2 and D3 Small Dozers Overview of the Next Generation Cat® D1, D2 and D3 Small Dozers
Cat® D1 Small Dozer Customer Story - Swell Construction Group (Florida, USA) Cat® D1 Small Dozer Customer Story - Swell Construction Group (Florida, USA)
Grade Control on the Next Generation Cat® D1, D2 and D3 Small Dozers Grade Control on the Next Generation Cat® D1, D2 and D3 Small Dozers
Cab Interior on the Next Generation Cat® D1, D2 and D3 Small Dozers Cab Interior on the Next Generation Cat® D1, D2 and D3 Small Dozers
Undercarriage on the Next Generation Cat® D1, D2 and D3 Small Dozers Undercarriage on the Next Generation Cat® D1, D2 and D3 Small Dozers
Daily Maintenance on the Next Generation Cat® D1, D2 and D3 Small Dozers Daily Maintenance on the Next Generation Cat® D1, D2 and D3 Small Dozers
Request Info

SPECS SUMMARY

Engine ModelCat® C3.6
Power - Net104 HP (77.6 kW)
Operating Weight20639.68 lb (9362 kg)
Operating Weight 20640 lb (9362 kg)
The new Cat® D3 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Specifications

Engine ModelCat® C3.6
Power - Net104 HP (77.6 kW)
Operating Weight20639.68 lb (9362 kg)
Operating Weight 20640 lb (9362 kg)
Operating Weight - LGP21369 lb (9693 kg)
Displacement220 in³ (3.6 l)
Drive Pumps1
Pump Output17.2 gal/min (65 l/min)
Weight1345 lb (610 kg)
Winch DriveHydrostatic
ControlHydraulic
SpeedVariable
TypeParallelogram
Number of Shanks3
Height6.5 in (165 mm)
Weight1222 lb (554 kg)
BLADE: Maximum Tilt - Intermediate17.7 in (448 mm)
BLADE: Blade Cutting Edge Angle, Adjustable - LGP52° to 58°
Tractor Height - LGP109 in (2769 mm)
BLADE: Blade Width at Maximum Angle - LGP115.8 in (2940 mm)
Length - Basic Tractor - Without Blade - LGP128.7 in (3270 mm)
BLADE: Blade Lift Height - Intermediate30.2 in (767 mm)
Drum Diameter10 in (254 mm)
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in)103.5 in (2630 mm)
BLADE: Blade Width - Intermediate115 in (2921 mm)
BLADE: Blade Width - LGP126.7 in (3220 mm)
BLADE: Blade Capacity (SAE) - LGP3.06 yd³ (2.34 m³)
Track Gauge - LGP67.9 in (1750 mm)
BLADE: Digging Depth - LGP22.5 in (572 mm)
BLADE: Digging Depth - Intermediate22.5 in (572 mm)
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Track Gauge - LGP, 762 mm (30 in)73 in (1860 mm)
Width - Tractor - Standard Shoes - No Blade - LGP92.9 in (2360 mm)
Ground Clearance - LGP, 762 mm (30 in)13 in (332 mm)
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate52° to 58°
BLADE: Blade Height - LGP39.8 in (1010 mm)
Track Gauge - Standard 63 in (1600 mm)
BLADE: Blade Width at Maximum Angle - Standard 103.8 in (2636 mm)
BLADE: Blade Width - Standard 109.5 in (2782 mm)
Note Abrasion Undercarriage
BLADE: Maximum Tilt - Standard 15.8 in (402 mm)
BLADE: Blade Height - Standard 42.2 in (1073 mm)
BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58°
Overall Length - With Blade - Standard 170.7 in (4337 mm)
Ground Clearance - Standard 13 in (332 mm)
Tractor Height - Standard 109 in (2769 mm)
BLADE: Blade Lift Height - Standard 30.2 in (767 mm)
BLADE: Digging Depth - Standard 23.1 in (586 mm)
Width - Tractor - Standard Shoes - No Blade - Standard 83 in (2110 mm)
BLADE: Blade Capacity (SAE) - Standard 2.86 yd³ (2.19 m³)
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in)128.7 in (3270 mm)
Length - Basic Tractor - Without Blade - Standard 128.7 in (3270 mm)
BLADE: Maximum Angle (either side) - LGP25°
Tractor Height - LGP, 762 mm (30 in)109 in (2769 mm)
BLADE: Maximum Tilt - LGP17.7 in (448 mm)
BLADE: Maximum Angle (either side) - Intermediate25°
Overall Length - With Blade - LGP169.6 in (4309 mm)
BLADE: Blade Capacity (SAE) - Intermediate2.73 yd³ (2.09 m³)
BLADE: Blade Width at Maximum Angle - Intermediate105.1 in (2669 mm)
BLADE: Blade Height - Intermediate39.8 in (1010 mm)
Overall Length - With Blade - LGP, 762 mm (30 in)169.6 in (4309 mm)
Ground Clearance - LGP13 in (332 mm)
Maximum Line Speed - Bare Drum131 ft/min (40 m/min)
BLADE: Blade Lift Height - LGP30.2 in (767 mm)
Drum Capacity - Recommended Cable371 ft (113 m)
Throat Clearance6.75 in (171.5 mm)
Drum Width10.8 in (274 mm)
Maximum Travel Speed - Reverse6.2 mile/h (10 km/h)
Shoe Width - LGP26 in (660 mm)
Length - Track on Ground - LGP, 762 mm (30 in)91 in (2310 mm)
Ground Pressure - LGP, 762 mm (30 in)3.9 psi (27.2 kPa)
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage40
Length - Track on Ground - LGP91 in (2310 mm)
Track Gauge - LGP69 in (1750 mm)
Ground Pressure - LGP4.5 psi (31.2 kPa)
Shoe Width - Standard20 in (510 mm)
Relief Valve Settings7033 psi (48500 kPa)
Track Motors2
Maximum Travel Speed - Forward5.6 mile/h (9 km/h)
Track Gauge63 in (1600 mm)
FOPSISO 3449:2005 Level II
ROPSISO 3471:2008
Note (1)Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2)For machine with ripper, add 554 kg (1,222 lb).
Operating Weight - LGP, 762 mm/30 in21810 lb (9893 kg)
Note (2)All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power Train Hydrostatic
Note (1)Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269104 HP (77.6 kW)
Net Power - 2,200 rpm - SAE J1349104 HP (77.6 kW)
Shoe Width - LGP, 762 mm (30 in)30 in (762 mm)
Number of Rollers - Each Side7
Winch Length27.76 in (705 mm)
Maximum Digging Depth13.3 in (337.5 mm)
Drum Capacity - Optional Cable256 ft (78 m)
Maximum Line Pull - Bare Drum40000 lb (18144 kg)
Rope Diameter - Optional0.75 in (19 mm)
Maximum Line Speed - Full Drum207 ft/min (63 m/min)
Overall Width29.2 in (741 mm)
Rope Diameter - Recommended0.63 in (16 mm)
Maximum Line Pull - Full Drum25000 lb (11340 kg)
Maximum Ground Clearance Under Tip17.6 in (448 mm)
Overall Width67.3 in (1710 mm)
Maximum Reach - Ground Line30.2 in (766 mm)
Relief Valve Settings2988 psi (20600 kPa)
Track Gauge - LGP, 762 mm (30 in)73 in (1860 mm)
Final Drives - Each Side 2.6 gal (US) (10 l)
Fuel Tank51.5 gal (US) (195 l)
Transmission - Hydraulic Tank23.8 gal (US) (90 l)
Diesel Exhaust Fluid (DEF) Tank4.9 gal (US) (19 l)
Crankcase - With Filter2.8 gal (US) (10.5 l)
Final Drive - Each - LGP2.6 gal (US) (10 l)
Cooling System5 gal (US) (19 l)
Number of Shoes - Each Side - Abrasion Undercarriage 36
Length of Track on Ground 91 in (2310 mm)
Ground Pressure 5.7 psi (38.9 kPa)
BLADE: Maximum Angle (either side) - Standard 25°

Benefits and Features

  • New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

  • Scalable 2D and 3D Cat Grade provide technologies like Slope Assist, Stable Blade, and Slope Indicate for easier and more efficient operation, as well as the flexibility to adapt different technology based on job site demands.
  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica.
  • Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

  • The D3 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.

  • The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

  • This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

  • The D3 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.

Standard Equipment

  • Air cleaner with precleaner, automatic dust ejection and underhood intake
  • Aluminum bar plate cooling system (radiator, power train)
  • Automatic traction control
  • Cat C3.6 diesel engine
  • Drive, auxiliary
  • Dual path, closed loop, hydrostatic transmission
  • Electric fuel pump
  • Fuel/water separator
  • Turbocharged aftercooled
  • Alarm, backup
  • Alternator, 150 amp, heavy duty
  • Batteries, heavy duty, maintenance free, 1,000 CCA
  • Diagnostic connector
  • Four integrated front halogen lights, two rear halogen
  • Horn, electric
  • Starter, electric, 12 V, heavy duty
  • SALT undercarriage (40 section)
  • Carrier rollers
  • Guards, front/rear guiding
  • Seven roller track frame
  • Track adjusters, hydraulic
  • Track rollers, lifetime lubricated
  • Hydraulic pump and oil
  • Single lever, three function control
  • Three valve hydraulics
  • Cat Product Link PLE643/PLE743 Cellular
  • Slope Indicate
  • Stable blade
  • Compatibility with radios and base stations from Trimble, Topcon, and Leica
  • Capability to install 3D grade systems from Trimble, Topcon, and Leica
  • Rigid drawbar
  • Front pull device
  • Armrests, adjustable
  • Coat hook
  • Controls, seat mounted, fore/aft adjustment
  • Cup holders
  • Eco mode
  • Electronic Monitoring system with gauge:
    – Chassis slope indication
    – Diesel exhaust fluid (DEF)
    – Engine coolant temperature
    – Fuel level
    – Hydraulic oil temperature
  • Electronic security system
  • Engine air cleaner service indicator
  • Engine RPM and gear display
  • Floor mat, rubber, heavy duty
  • Foot pads, dash
  • Hour meter, electronic
  • Independent forward/reverse speed settings
  • Mirror, rearview, inside
  • Power port, 12 volt
  • ROPS/FOPS canopy
  • Seat, air suspended, cloth or vinyl
  • Seatbelt, hi-vis retractable 76 mm (3")
  • Seatbelt buckling indicator/reminder
  • Single pedal combining decel and brake functions
  • Speed recall
  • Storage compartment
  • Throttle switch, rotary
  • Travel speed limiter, electronic

Optional Equipment

  • Air cleaner with external precleaner
  • Installation, winch
  • Four integrated front LED lights, two rear LED
  • Abrasion undercarriage (36 section)
  • Track Pairs
    – Track, 510 mm (20 in)
    – Track, 660 mm (26 in)
    – Track, 762 mm (30 in)
  • Four valve for use with ripper
  • Four valve for use with winch
  • Cat GRADE with Slope Assist
  • Cat GRADE with 3D
  • Cat Product Link PLE683/PLE783 Cellular/Satellite
  • Full-color 10 in (254 mm) touchscreen grade display
  • Power Pitch
  • Drawbar, towing
  • Machine security system
  • Mounting, winch
  • Ripper, parallelogram, includes three shanks and teeth
  • Winch, hydraulic, high performance
  • Winch, hydraulic, retrieval
  • Cab, with air conditioning
  • Cab, polycarbonate windows and air conditioning
  • Radio, AM/FM Bluetooth®
  • Seat, air suspension, choice of:
    – Vinyl, heated seat with heated controls
    – Cloth, heated seat with heated controls
    – Cloth, heated and ventilated seat with heated controls
  • Sound suppression
  • Heater, engine, coolant 120 V/240 V
  • Starting aid, ether