D9 Dozer | Bulldozer




Contact Us For Price
SPECS SUMMARY
Engine Model | Cat® C18 |
Engine Power - Net SAE J1349/ISO 9249 | 452 HP (337 kW) |
Operating Weight | 110225 lb (49988 kg) |
Shipping Weight | 84373 lb (38271 kg) |
Specifications
Engine Model | Cat® C18 |
Engine Power - Net SAE J1349/ISO 9249 | 452 HP (337 kW) |
Operating Weight | 110225 lb (49988 kg) |
Shipping Weight | 84373 lb (38271 kg) |
Shoe Type | Extreme Service |
ROPS | Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. |
Steering Type | Differential |
FOPS | Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. |
Width - Shoe | 24 in (610 mm) |
Pump Type | Piston-type geared to flywheel |
Maximum penetration force * (shank vertical) | 38667 lbf (172 kN) |
Blade Capacity (SAE J1265) | 21.7 yd³ (16.6 m³) |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. |
Sound | The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. NOTE: The dynamic sound power level uncertainty is +/-2 dB(A). |
Engine Model | Cat® C18 |
Fuel Tank (Splash Fill) | 254 gal (US) (963 l) |
Brake Type | Spring Applied Wet Disc |
Blade Capacity (SAE J1265) | 17.8 yd³ (13.6 m³) |
Maximum Penetration Force - Shank Vertical | 34621 lbf (154 kN) |
1.0 Forward | 2.2 mile/h (3.5 km/h) |
Bore | 5.7 in³ (145 mm) |
Maximum penetration force * (shank vertical) | 35520 lbf (158 kN) |
Blade Width (over end bits) | 184.3 in (4680 mm) |
Sound (1) | The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: The dynamic operator sound pressure level uncertainty is +/-2 dB(A). |
Ground Clearance* | 18.1 in (459 mm) |
2.0 Forward | 3.9 mile/h (6.3 km/h) |
Blade Width (over end bits) | 171.3 in (4350 mm) |
Shoes/Side | 43 |
Pump Output - Steering | 96 gal/min (363 l/min) |
DEF Tank (Tier 4 only) | 9.5 gal (US) (36 l) |
Maximum penetration depth (standard tip) | 68 in (1727 mm) |
Stroke | 7.2 in (183 mm) |
Maximum Penetration - Standard Tip | 31.4 in (798 mm) |
Bore | 5.7 in³ (145 mm) |
Maximum penetration depth (standard tip) | 48.5 in (1231 mm) |
Displacement | 1106 in³ (18.1 l) |
Brake Diameter | 15.5 in (393.7 mm) |
Grouser Height | 3.3 in (84 mm) |
Sound (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. |
Pry-Out Force - Multi-Shank Ripper with One Tooth | 81156 lbf (361 kN) |
Fan Pump | 21 gal/min (80 l/min) |
3.0 Forward | 6.8 mile/h (11 km/h) |
Track Gauge | 88.6 in (2250 mm) |
Blade Height | 76.1 in (1934 mm) |
Pryout Force | 74637 lbf (332 kN) |
Fuel Tank (Fast Fill) | 248 gal (US) (939 l) |
Pryout Force | 74412 lbf (331 kN) |
Stroke | 7.2 in³ (183 mm) |
Blade Height | 76.1 in (1934 mm) |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.6 in (879 mm) |
Width - Without Trunnions - Standard Shoe | 113 in (2870 mm) |
Maximum Digging Depth | 23.9 in (606 mm) |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 34.7 in (882 mm) |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 32.2 in (817 mm) |
1.0 Reverse | 2.7 mile/h (4.4 km/h) |
Engine Power - Gross SAE J1995 | 487 HP (363 kW) |
Displacement | 1106 in³ (18.1 l) |
Cooling System | 21 gal (US) (81.3 l) |
Ground Clearance at Full Lift | 56 in (1422 mm) |
Pitch | 9.4 in (240 mm) |
Engine Power - ISO 14396 | 479 HP (357 kW) |
Engine Crankcase* | 10 gal (US) (36 l) |
Number of Pockets | 3 |
Width - Over Trunnions | 130.3 in (3310 mm) |
Engine Power - Gross SAE J1995 | 477 HP (356 kW) |
2.0 Reverse | 4.8 mile/h (7.8 km/h) |
Number of Pockets | 1 |
Number of Pockets | 1 |
Maximum Tilt | 39.9 in (1014 mm) |
Powertrain | 40 gal (US) (150 l) |
3.0 Reverse | 8.4 mile/h (13.6 km/h) |
Engine Power - ISO 14396 | 468 HP (349 kW) |
Brake Count | 8 |
Height - FOPS Cab* | 150.4 in (3820 mm) |
Weight | 12136 lb (5550 kg) |
Ground Clearance | 18.1 in (459 mm) |
Height - Top of Stack* | 152.6 in (3876 mm) |
Engine Power - Net SAE J1349/ISO 9249 | 440 HP (328 kW) |
Total Operating Weight* - With SU-Blade and Ripper | 111739 lb (50684 kg) |
Blade Weight | 12016 lb (5450 kg) |
Maximum Digging Depth | 23.9 in (606 mm) |
Final Drives (each) | 4 gal (US) (15 l) |
Height - ROPS/Canopy* | 157.5 in (4000 mm) |
Roller Frames (each) | 12 gal (US) (45 l) |
Weight | 10981 lb (4981 kg) |
Weight | 10701 lb (4854 kg) |
Ground Clearance at Full Lift | 56 in (1422 mm) |
Track Gauge | 88.6 in (2250 mm) |
Maximum Tilt | 37 in (940 mm) |
Length - Track on Ground | 136.6 in (3470 mm) |
Drawbar Height (Center of Clevis)* | 30 in (763 mm) |
Blade Weight | 10587 lb (4802 kg) |
Ground Contact Area | 45.6 ft² (4.23 m²) |
Pivot Shaft Oil | 8 gal (US) (30 l) |
Length - Track on Ground | 136.6 in (3470 mm) |
Type | Planetary powershift |
Total Operating Weight* (with SU Blade and noted ripper) | 110205 lb (49988 kg) |
Total Operating Weight* (with SU Blade and noted ripper) | 110485 lb (50115 kg) |
Total Operating Weight* (with blade and single-shank ripper) | 111362 lb (50513 kg) |
Emissions | U.S. EPA Tier 4 / EU Stage V |
Hydraulic System Tank | 24 gal (US) (89 l) |
Overall Length - Basic Tractor | 193.3 in (4910 mm) |
Total Operating Weight* (with blade and single-shank ripper) | 110205 lb (49988 kg) |
Length - Basic Tractor - With Drawbar | 206.4 in (5242 mm) |
Track Rollers/Side | 8 |
Length - Basic Tractor - With Winch | 218.3 in (5545 mm) |
Number of Carrier Rollers | 1 per side (optional) |
Length - With SU-Blade** | 259.9 in (6601 mm) |
Length - With U-Blade | 274.3 in (6967 mm) |
Length - With Single-Shank Ripper | 257 in (6529 mm) |
Length - With Multi-Shank Ripper | 257.4 in (6538 mm) |
Overall Length - SU-Blade/SS Ripper | 323.6 in (8219 mm) |
Tilt Cylinder Flow - Rod End Flow | 53 gal/min (200 l/min) |
Tilt Cylinder Flow - Head End Flow | 53 gal/min (200 l/min) |
Lift Cylinder Relief Valve Setting | 3800 lbf/in (26200 kPa) |
Tilt Cylinder Relief Valve Setting | 2799 psi (19300 kPa) |
Ripper - Lift - Relief Valve Setting | 3800 psi (26200 kPa) |
Ripper - Pitch - Relief Valve Setting | 3800 psi (26200 kPa) |
Steering System - Pressure | 5874 psi (40500 kPa) |
Tank Capacity | 24 gal/min (89 l) |
Winch Model | PA 140VS |
Weight* | 3950 lb (1790 kg) |
Oil Capacity | 4 gal (US) (15 l) |
Drum Width | 12.6 in (320 mm) |
Wire Cable Diameter - Recommended | 1.13 in (28 mm) |
Wire Cable Diameter - Optional | 1.25 ft (32 mm) |
Maximum Drum Capacity - Recommended Cable Length | 257 in (78 m) |
Maximum Drum Capacity - Optional Cable Length | 204 ft (62 m) |
Wire Cable Ferrule Size - Outside Diameter | 2.4 in (60 mm) |
Note | *With oil filters. |
Emissions | U.S. EPA Tier 2 or Tier 3 equivalent |
Wire Cable Ferrule Size - Length | 2.8 in (70 mm) |
Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Note (1) | D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. |
Note | * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Note (1) | All engine ratings apply at 1,750 rpm. |
Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Note (1) | All Engine ratings apply at 1,750 rpm. |
Note | *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Note (1) | Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). |
Note | *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
Note | * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
Note 2 | Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Note (2) | Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). |
Note (2) | D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
Note (2) | Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
Note (2) | No derating required up to 2499 m (8,200 ft). |
Note 3 | All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. |
Note (2) | No derating required up to 4267 m (14,000 ft) altitude. |
Note 4 | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Note (3) | Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) |
Benefits and Features
- The torque converter with stator clutch automatically frees up the stator when torque multiplication is not required under low load, resulting in higher drivetrain efficiency for reduced fuel consumption.
- Bogie suspension allows the track to conform to ground conditions, delivering higher traction and less slippage.
- Differential steering enables large loads, with fast and smooth maneuvering.
- The cab is unparalleled, with enhanced ergonomics, a fully adjustable air suspension seat and automatic temperature control.
- The suspended undercarriage absorbs impact and reduces shock loads transferred to the undercarriage by up to 50% for a smoother, more comfortable ride.
- Low-effort electronic steering, ripper and dozer controls are easily accessible and provide sure, precise maneuvering.
- The operator station offers an exceptional viewing area, with a tapered hood, notched fuel tank, and narrow ripper carriage to give the operator a clear line of sight to front and rear work areas.
- The optional 360 Vision camera system and in-cab display further enhance visibility.
- An optional powered ladder improves access and egress.
- Ground-level access, forward-hinging cab door, retention pins on bottom guard and removed lift cylinder grease points provide a greater level of safety for service personnel.
- Differential steering provides a tight turning radius and maintains a high ground speed while turning.
- The planetary powershift transmission controls permit smooth speed and direction changes with Advanced Productivity Electronic Control System (APECS).
- The in-cab touchscreen Information Display is larger, faster, and more powerful with increased memory and intuitive menu structure.
- The optional Work Monitor screen collects machine data and provides real-time feedback on machine performance to optimize productivity.
- The Dual Tilt option allows the operator to optimize blade pitch angle, improving load control and making it possible to carry material instead of only pushing it.
- The D9 is versatile enough for a variety of applications and is ideal for use in heavy construction, quarries, landfills, stockpiles, forestry and mine sites.
- The powerful Cat C18 Engine is available in U.S. EPA Tier 2, U.S. EPA Tier 3, U.S. EPA Tier 4 Final and EU Stage V configurations.
- The fully suspended undercarriage provides more ground contact, leading to less slippage and more overall productivity in all applications.
- Continuous power to both tracks provides smooth turning control and excellent maneuverability in every application, all while keeping ground speed high.
- Product Link™ Elite enables the remote transmission of information about the location, operation and condition of your equipment.
- Automated Blade Assist (ABA) (optional) increases efficiency while reducing operator workload, making use of preset blade pitch positions for the load, carry and spread portions of the cycle.
- AutoCarry™ (optional) automates blade lift to maintain desired blade load, improve load consistency and reduce track slip.
- Automatic Ripper Control (optional) automatically controls ripper height to limit track slip, reducing operator fatigue.
- Optional Cat MineStar™ Command for dozing offers multiple levels of remote-control operation.
- Features such as integrated AutoLube System, fewer greasing points, longer filter change intervals, easy component removal and continuous fluid level monitoring contribute to up to 4% maintenance and repair savings.
- Grouped maintenance points minimize movement around the machine, and ground-level access enables easier service for fluids and key electrical controls.
- Remote flash sends an alert from your Cat dealer, prompting you to update the software on your machine. Updates can be deployed on site, without having to wait for a dealer technician to arrive.
- The perfect match for the D9, Cat blades are aggressive in tough materials and offer superior loadability.
- Cat blades have the ability to resist torsional bending and distortion and offer increased wear resistance without sacrificing machine balance or performance.
- Specialty attachments include single-shank ripper and multi-shank ripper
- Frame is built to absorb high-impact shock loads and twisting forces encountered during severe dozing and ripping applications.
- Powertrain and main components are built to be rebuilt for a cost-effective second life of like-new performance at a fraction-of-new price.
- The DuraLink™ undercarriage offers 20 to 40% longer life and delivers 8,000-hour seal life with new, heavy-duty extended-life (HDXL) undercarriage.
- The D9 is designed to use less fuel, which reduces engine emissions.
- The Tier 4 Final engine reduces NOx and particulate matter, plus the engine is compatible with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels.
- Features like extended life filters and longer maintenance intervals decrease the amount of waste contributed to the environment.
- By rebuilding machines and components, the Cat Rebuild and Cat Reman programs preserve raw materials, conserve energy and reduce emissions. In addition, retrofits and upgrades for older machines incorporate efficiency improvements and emission reductions, and keep them in production longer to conserve energy and minimize the need for raw materials.
- Increased commonality of systems and components, plus a reduction in unique part numbers, reduces waste and lowers owning and operating costs.
Standard Equipment
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seatbelt, 76 mm (3 in) Retractable with Switch
- Seat — Cloth with Air Suspension
- Window Wipers with Wash — Low, High, Intermittent
- Differential Steering — Power Turn
- Entertainment Radio Ready (12V Power, Harness, Speakers)
- Cab Glass — Single-Pane Tinted Safety
- Cab Door — Right-Hand Swing
- Access/Egress Lighting with Shutdown Timer
- "Operator Not Present" Detection
- Armrest — Adjustable
- Interior LED Courtesy Lights
- Interior Backlighting — Dimmable
- Air Conditioning Condenser — Cab Mounted (Standard only on Tier 4 engine arrangements. Optional on Tier 2/3 versions. Tier 2/3 versions have underhood A/C condenser standard.)
- Decelerator Pedal
- Controls — Blade — Electronic
- Controls — Ripper — Electronic
- Park Brake — Electronic
- Engine Speed Control Dial
- Cab Access — Blade Pusharm Steps and Grab Handle
- Fender Platform Guardrails
- Site Communication Radio Mount
- Four Fluids (Engine Oil, Coolant, Power Train, Fuel)
- Continuous Fluid Level Monitoring — Four Fluids (Engine Oil, Power Train, Coolant, Fuel)
- Slope and Side Slope Monitor
- VIMS™
- Automated Blade Assist (ABA) — When Equipped with Dual Tilt
- Cat Product Link Elite (Cellular) (Where Allowed by Local Regulations)
- Aftercooler, air-to-air
- Air filter, with precleaner
- Aluminum bar plate radiator, 6 fpi
- C18 Tier 4 Final and Stage IV: – 24-volt electric start – Clean Emissions Module
- Coolant, extended life
- Shift management: - Advanced Productivity Electronic Control System (APECS) - Enhanced AutoShift (EAS)
- Engine idle shutdown timer
- Ether starting aid, automatic
- Fast fuel system
- Fuel priming pump, key-on, electric
- High speed oil change system, engine and power train
- Muffler
- Parking brake, electronic
- Prescreener
- Separator, water/fuel
- Three planet, double-reduction planetary final drives
- Torque converter
- Transmission, electronic control (ECPC), (3F/3R speeds)
- Coolant — Extended Life, Standard (— 37° C / — 25° F)
- Suspension-Type Undercarriage
- Track Guide
- Two-Piece Master Link
- Lifetime-Lubricated Rollers and Idlers
- Hydraulic Track Adjusters
- Equalizer Bar — Greased End Pin Bearings
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Electronically Enabled Blade, Quick Drop
- Alternator — 150-Amp
- Batteries — 2 x 4, 200-Amp Hour, 12V
- 12V, 15-Amp Converter
- Battery Isolation
- Backup Alarm
- Lights, Engine Compartment
- Lights — Halogen — 8 Positions
- Ecology Fluid Drains — All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change — Engine and Transmission
- S•O•S℠ Fluid Sampling Ports
- Diagnostic Connector
- CapSureTM Hammerless Ripper Tip and Shank Protectors
- Anchorage Points (10)
Optional Equipment
- Visibility – Camera – Ripper Tip View
- Visibility — Dual Camera
- Visibility — Four Cameras — 360-Degree View
- Seat — Heated, Cooled, Adjustable Lumbar and Bolsters
- Entertainment Radio — AM/FM, Aux Input and Bluetooth®
- Cab Glass — Dual-Pane Laminated Impact Safety
- Cab Glass — High-Pressure Safety (40 psi/275 kPa)
- Window Sunscreen
- Small Operator 5th Percentile Mounting Group
- Cab Door — Left-Hand Swing
- Cab Access — Powered Ladder
- Cab Filter Powered Precleaner
- AutoCarry™
- Auto Ripper Control
- Cat Product Link Elite Dual Mode (Cellular + Satellite)
- Cat GRADE with 3D
- Coolant, arctic
- Engine prelube
- Exhaust, wrapped: – Insolated Clean Emissions Module
- Final drives: – Cold weather – Guarded – Waste handling
- Ground level DEF fill
- Reversible cooling fan
- Coolant — Extended Life, Arctic (— 51° C / — 60° F)
- High Ambient Lubrication Package
- Arctic Lubrication Package
- Undercarriage Arrangement — Abrasion
- Undercarriage Arrangement — Waste Handling
- Undercarriage Arrangement — Cold Weather
- Front Striker Bars
- Rubber Idler Guards
- Track Links — Heavy Duty XL — DuraLink
- Track Shoe — Anti-Packing Round Hole Carrier Roller
- Carrier Roller
- Carrier Roller — Cold Weather
- Dozer Blade Dual Tilt
- Ripper Pin Puller
- Guarded Tilt Cylinder Lines
- 24V Electric Start, Dual Starters
- Batteries — 4 x 200, 200-Amp Hour, 12V
- Lights — Halogen — 12 Positions
- Lights — LED — 14 Positions
- Lights — High-Output LED — 14 Positions
- Light — Warning Strobe
- Sound-Reduction Sealed Bottom Guards
- Ground-Level Fast Fuel Fill (Standard on Tier 4)
- Sound Enclosure
- Cat Autolube Grease System with Ground-Level Fill and Auto Shutoff
- Hinged Quick-Access Door on Radiator Guard
- Ripper Ready
- Winch Ready
- Ripper — Single Shank
- Ripper — Single-Shank Deep
- Ripper — Multi Shank (three shank)
- Counterweight
- Striker Box (Waste)
- Winch
- Drawbar
- Semi-Universal (13.6 m3/17.8 yd3)
- Semi-Universal Abrasion (13.6 m3/17.8 yd3)
- Universal (16.6 m3/21.7 yd3)
- Universal Abrasion (16.6 m3/21.7 yd3)
- Semi-Universal Push Plate (13.6 m3/17.8 yd3)
- SU Landfill (28.2 m3/36.8 yd3)
- Universal Landfill (38.8 m3/50.8 yd3)
- Woodchip (46.1 m3/60.3 yd3)
- Coal (36.8 m3/48.2 yd3)
— Some blades only available through Cat Work Tools.
— SU Abrasion and U Abrasion are available with black paint on back side.
- Fire Suppression Ready
- High Debris
- Stockpile
- Waste Handling
- Sound
- Arctic