Request Info

SPECS SUMMARY

Bit LoadUp to 32 655 kg (Up to 71,993 lb)
Hole Diameter152-250 mm (6-9.875 in)
EngineC27 @ 1,800 rpm
Components (1)Dual starter motors
The Cat® MD6250 rotary drill is built from the ground up with 100 percent Cat parts to help you get the most out of your operation. With built-in autonomous features and the option to integrate Cat MineStar technologies, the MD6250 offers accurate, reliable performance in any hard rock drilling application.

Specifications

Bit LoadUp to 32 655 kg (Up to 71,993 lb)
Hole Diameter152-250 mm (6-9.875 in)
EngineC27 @ 1,800 rpm
Components (1)Dual starter motors
Components (2)Ether starting aid (ether bottle supplied locally)
FeaturesScheduled Oil Sampling (S·O·SSM) ports
Components (1)Coolers with easy cleaning access
Components (2)Separate engine cooling module
Components (3)All cooler core sections are replaceable
Components (4)Automatic variable speed fan control
FeaturesFunctional in ambient temperature of 52° C (125° F)
Climate Level 1 Standard Fluids and Lubricants (1)Rated down to –1° C (30° F)
Climate Level 1 Standard Fluids and Lubricants (2)Withstands high heat to 52° C (125° F)
Climate Level 2 Arctic Fluids and LubricantsRated down to –18° C (–0.4° F)
Climate Level 4 Arctic Fluids and Lubricants (1)Rated down to –40° C (–40° F)
Climate Level 4 Arctic Fluids and Lubricants (2)Diesel fired heating system that heats and circulates engine coolant through engine block, below deck water tank, heating elements for battery trays
Climate Level 4 Arctic Fluids and Lubricants (3)Full Arctic lubricant package to include engine and hydraulic oil
Climate Level 4 Arctic Fluids and Lubricants (4)Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, heat trace for hosing from water tank to water pump and water fast-fill assembly, plus primary tank
Climate Level 4 Arctic Fluids and Lubricants (5)Shore power connection box with switchable 240-600V (50 amp) connection (diesel gen set and/or plug supplied locally). Box includes standard 50 hz battery charger, if 60 hz charger required, to be ordered via after market, refer to P-n 540-4271
Features (1)Leveling Jacks, A-frame/mast pivot and drill deck are welded integrally to mainframe for maximum durability and long life
Features (2)Primary fuel tank capacity 1416 L (374 gal)
Features (3)Fuel capacity expansion for additional 1416 L (374 gal) optional for total capacity of 2832 L (748 gal); (required for autonomy packages)
Features (4)Three (3) egress points on deck areas in addition to main access
Components (1)Stationary drill deck; for vertical and angle drilling
Components (2)Four leveling jacks provide leveling on a 7° bench (any orientation)
Components (3)Heavy duty tow hooks (front end)
Components (4)Four (4) lift lugs, for use with cables or chains
Components (5)Fixed access stairs to the cab area
Components (6)Sturdy guardrails with toe guards, self-closing gates
ModelCat® 336E EL Excavator type
Carrier RollersThree (3)
Track chain guards and guidesLevel two
Drawbar Pull93745 lbf (417000 N)
Triple Grousers (1)600 mm (23.6 in); for hard rock 0.88 bar (12.7 psi) ground bearing pressure
Triple Grousers (2)750 mm (29.5 in); for soft rock 1.10 bar (15.9 psi) ground bearing pressure
Components (1)Two (2) primary pumps – 145 cc (piston, with proportional electronic controls)
Components (2)One (1) auxiliary circuit pump – 110 cc (piston, load sensing)
Components (3)Two (2) fan pumps – 74 cc (piston, with proportional electronic controls)
Components (4)Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement)
11.2 m (36.7 ft) Mast - Hoist CapacityUp to 20 411 kg (Up to 45,000 lb)
Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 (DIN)838 mhp (PS)
Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396826 HP (616 kW)
6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 57 in (178 mm)
Features (8)Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH
Features (1)Mast configurations complete with pipe rack carousel and angle drilling package (vertical, out to 30 degrees in 5-degree increments)
6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 25.5 in (140 mm)
10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 57 in (178 mm)
Features (3)Drill strings configured for bit changes (above the deck)
Features (11)Rotation gear box with single motor up to 160 rpm, up to 11 700 N∙m (8,629 lbf-ft) torque
11.2 m (36.7 ft) Mast - Hoist Speed2.65 ft/s (0.81 m/s)
Features (1)With the compressor’s variable volume control, the operator can limit air output resulting in reduced fuel consumption
Features (5)Auto tensioning of pull down and hoist cables
11.2 m (36.7 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Single-Pass Depth36.7 ft (11.2 m)
Compressor - DTH Drilling (2)42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi)
13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Single-Pass Depth44.6 ft (13.6 m)
10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 25.5 in (140 mm)
10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 36 in (152 mm)
Batteries, Sealed (2)Quantity: Six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages)
13.6 m (44.6 ft) Mast - Hoist CapacityUp to 22 113 kg (Up to 48,750 lb)
Mast Accessories Hydraulic - 13.6 m (44.6 ft) MastOne (1) hydraulically actuated pipe catcher, plus one (1) wire rope pipe catcher, hydraulically operated bit basket
13.6 m (44.6 ft) Mast - Pull-Down CapacityUp to 29 483 kg (Up to 65,000 lb)
13.6 m (44.6 ft) Mast - Bit Load (single pass)Up to 32 655 kg (Up to 71,993 lb)
11.2 m (36.7 ft) Mast - Pull-Down CapacityUp to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) Mast - Bit Load (single pass)Up to 22 321 kg (Up to 49,210 lb)
13.6 m (44.6 ft) Mast - Hoist Speed2.16 ft/s (0.66 m/s)
13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass DepthDown to 37.9 m (Down to 124.6 ft)
Features (2)Hydraulically actuated, self-indexing pipe rack carousel accepts pipe diameters from 127 mm (5.0 in) to 194 mm (7.625 in)
Features (4)Single Hydraulic Cylinder and cable system for pulldown/hoist
Features (9)Closed circuit camera in mast is used to view pipe rack carousel/top drive operation while racking pipes
11.2 m (36.7 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass DepthDown to 53.9 m (Down to 176.7 ft)
Emissions: Equivalent to U.S. EPA Tier 4 Final - Engine PowerC27 @ 1,800 rpm
Features (6)Variable grip hydraulic break out wrench for range of pipe diameters
Features (3)DTH selection includes tool oiler
Features (2)Electronic compressor control and regulation
Emissions: Equivalent to U.S. EPA Tier 2 - Engine PowerC27 @ 1,800 rpm
Mast Accessories Hydraulic - 11.2 m (36.7 ft) MastOne (1) hydraulically actuated pipe catcher, hydraulically operated bit basket
Features (7)Sliding deck wrench assembly
Features (10)Drill pipe positioner
Mast Accessories Manual - 11.2 m (36.7 ft) or 13.6 m (44.6 ft) MastOne (1) wire rope pipe catcher, manual bit basket
Width Non-Cab End15.9 ft (4.845 m)
Receiver Tank Choice (1)Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE
Climate Level 4 Arctic fluids and lubricants (6)Breaker panel includes five (5) additional breakers for locally supplied heating elements if needed
Lower rollersTwelve (12)
Cab - Standard– Fabric seat
– Single pane window glass
– Removable guard for driller window
– Wiper for the driller window
Width Cab End18.45 ft (5.625 m)
10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 46.5 in (165 mm)
Components (13)Lifting lugs
Components (22)Prewired for Terrain and autonomous operation
Travel Speed1.5 mile/h (2.45 km/h)
Cab - Premium– Additional storage
– Leather seat with heat and ventilation
– Heavy duty seat suspension
– Dual pane window glass
– Removable guard for driller window, plus window facing power train
– Wipers for the driller window plus front and rear windows
FeatureApproach angle of 15 degrees facilitates loading and unloading on a lowboy
Components (7)Pipe wiper seal
Variable Grip Hydraulic Break Out Wrench Grip Ranges (2)152-216 mm (6.0-8.5 in)
Variable Grip Hydraulic Break Out Wrench Grip Ranges (1)114-152 mm (4.5-6.0 in)
Width Cab End18.45 ft (5.624 m)
Components (5)Scheduled Oil Sampling (S·O·S) ports
Width Non-Cab End15.9 ft (4.845 m)
Angle DrillingIncluded with either mast
Components (23)Drill Assist automated functionality:
– Auto level, auto jack retract
– Auto mast raise and lock, auto mast unlock and park
Receiver Tank Choice (2)High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE
Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396872 HP (650 kW)
Components (8)Drill tool lubricator is included with selection of DTH Compressor
Batteries, Sealed (1)Quantity: Four (4)
Compressor - DTH Drilling (1)38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi)
6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 36 in (152 mm)
Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 (DIN)884 mhp (PS)
10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 15 in (127 mm)
Pipe rack carousel, standard:– 11.2 m (36.7 ft) Mast: holds quantity of four (4) 10.6 m (35 ft) pipes
– 13.6 m (44.6 ft) Mast: holds quantity of four (4) 6.1 m (20 ft) pipes
10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 67.625 in (194 mm)
6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 67.625 in (194 mm)
6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 15 in (127 mm)
6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 46.5 in (165 mm)
Compressor - Rotary Drilling56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
Lifting Bails (Available on Request)– API thread 89 mm (3.5 in) – to lift corresponding drill tools (6.75 in tricone bits or 6-inch class DTH hammers)
– API thread 114 mm (4.5 in) – to lift corresponding drill tooling (7.875 and 9.0 in tricone bits or 8-inch class DTH hammers)
– API thread 140 mm (5.5 in) – to lift shock sub adapter
– BECO thread 102 mm (4.0 in) – to lift corresponding drill pipe (5.5 in OD)
– BECO thread 114 mm (4.5 in) – to lift corresponding drill pipe (6.0, 6.5, 6.625 and 7.0 in OD)
– BECO thread 152 mm (6.0 in) – to lift corresponding drill pipe (7.625 in OD)
Mast Only Shipping Length61.4 ft (18.72 m)
NoteWidth and length dimensions include: cascading stairs and walk-around access for cab.
Mast Only Shipping Length53.5 ft (16.32 m)
NoteWidth and length dimensions include: cascading stairs and walk-around access for cab.
Components (1)One-piece roller deck bushing
Components (2)Pipe positioner rollers
Components (3)Deck wrench
Components (4)Top sub
Components (5)Bit sub
Components (6)Pipe wiper seal
Components (1)Two-piece roller deck bushing
Components (2)Pipe positioner rollers
Components (3)Deck wrench
Components (4)Shock sub
Components (5)Top Sub
Components (6)Hammer Sub
Torque - Single Motor8629 lb/ft (11700 N·m)
Rotation Speed0-160 rpm
Components (1)Spindle – 140 mm (5.5 in) API regular thread with splined collar
Components (2)Rotary torque control
Components (3)Virtual rotary head travel interlocks
Cab Design– Spacious FOPS cab is 3 m² (32.3 ft²) with an integrated operator station
– Cab rubber shock-mounts
– Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) color displays, high definition touchscreen and 12-volt power port
– Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
– Three (3) cc cameras (front and left side) providing 360° vision coverage from operators seat; camera in the mast to view pipe rack carousel/top drive operation
– Power convertor 24V to 12V
– Radio-ready for communication and entertainment stereo
– Two swing-out doors and Cat keyed locks
– Literature holder
– Removable floor mat
Seating– Seat swivels, locks and retractable, two-point/76 mm (3 in) wide seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
Windows– Large windows front, rear and right cab side; full length drill window with guard
– Windshield wipers with a common washer tank
Lighting– LED interior lights and map light at operators seat, backlit joysticks and keypads
– Flood lights for the drill perimeter
– Spotlights for power group area; drill deck; mast carousel; access ladder and walkways
– Lighting package includes 4,200 lumens flood light on perimeter, mast clearance lights, cab mounted strobe, front mounted tram beacon
HVAC– Floor heating vent
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck
– Defogging HVAC vents on main window
Components (1)All electric controls for drilling, tramming, leveling plus auxiliary functions
Components (2)Electronic compressor control
Components (3)Rotary torque control
Components (4)Virtual rotary head travel stops and interlocks
Components (5)Pipe positioner engaged/disengaged indicator
Components (6)Drill depth meter
Components (7)Drill performance and drill health display system
Components (8)Data logging of machine health with warnings and fault code records with export capability
Components (9)Delayed engine shut down
Components (10)Rotary head rpm gauge (digital display in screen)
Components (11)Filter indicators for hydraulic, fuel, compressor and engine
Components (12)Jack pressure sensors in display
Components (13)Dust suppression control
Components (14)Mast lock indicator
Components (15)ECM proportional fan speed control system
Components (16)Tram interlock, machine stability limits
Components (17)Tram interlock, pipe in hole
Components (18)Tram interlock, mast up and locked or down and parked
Components (19)Tram interlock, jack retracted
Components (20)Tram interlock, winch parked
Components (21)Cab environment controls (AC, filter, heat, fan speeds)
Type (1)Cat Terrain ready
Type (2)Autonomy ready
Components (1)Drill depth indicator
Components (2)Product Link™ Elite (hardware from factory, subscription package via dealer)
Choices (1)Water injection – tank mounted below front deck 1271 L (336 gal)
– Water flow meter, volume control, tank fill level indicator
Choices (2)Water injection plus dry dust collector 127 m³/min (4,500 ft³/min) dust collector; includes standard water injection
– Self-cleaning filters, dust chute with ejector
Choices (3)High volume water injection (maximum) – tanks total capacity 2786 L (736 gal)
– Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal)
– Tank above deck capacity 1514 L (400 gal)
Choices (4)Static dust curtains, four sided/boxed enclosed
Components (1)Alloy drill deck covers, for servicing when mast is horizontal
Components (2)Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck
Components (3)Over forty (40) conditional safety interlocks
Components (4)Hinged window guard over the full length of the front drill window
Components (5)Three (3) egress points on deck areas in addition to main access
Components (6)Self-closing gates secure egress ladder locations
Components (7)Electric horn activated by push button in the cab
Components (8)Automatic tram alarm, audible
Components (9)Under deck mounted battery box with keyed battery disconnect/starter disconnect/remote jump start terminals
Components (10)Compressor air hoses with safety retention cables
Components (11)Slip resistant surfaces
Components (12)Tow hooks on non-drill-end
Package (1)Fast fill for fuel and water, automated lubrication system
Package (2)Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, blow down hose (option)
Height - Mast Up56.3 ft (17.146 m)
Body Length38.41 ft (11.708 m)
Length - Mast Down58.3 ft (17.78 m)
Height - Mast Down16.84 ft (5.134 m)
Height - Mast Up61.13 ft (19.546 m)
Body Length38.41 ft (11.708 m)
Length - Mast Down66.17 ft (20.18 m)
Height - Mast Down16.84 ft (5.134 m)
Working Weight Range56 468 kg to 64 154 kg (124,490 lb to 141,436 lb)

Benefits and Features

The MD6250 crawler-mounted blasthole drill is designed to drill from 152-250 mm (6-9.8 in) diameter holes in Rotary or DTH (Down the Hole) modes to single pass or multi pass depths.The Cat® MD6250 rotary drill is built from the ground up with 100 percent Cat parts to help you get the most out of your operation. With built-in autonomous features and the option to integrate Cat MineStar technologies, the MD6250 offers accurate, reliable performance in any hard rock drilling application.

Standard Equipment

  • Emissions: Equivalent to Tier 2, Engine Power C27 @ 1,800 rpm, ISO 14396 616 kW (826 hp), ISO 14396 (DIN) 838 mhp (PS)
  • Emissions: Equivalent to Tier 4 Final, Engine Power C27 @ 1,800 rpm, ISO 14396 650 kW (872 hp), ISO 14396 (DIN) 884 mhp (PS)
  • Compressor (2,000 ft³/min, 125 psi) – Rotary drilling package, 56.6 m³ (2,000 ft³/min) at 8.6 bar (125 psi); with low pressure receiver tank for ASME/CRN/AU or CE
  • Standard – Includes a fabric seat, single pane window glass, removable driller window guard, and a windshield wiper for driller window
  • Drill depth indicator and interlocks, auto-level, auto-mast
  • Product Link (Satellite)
  • Machine access via fixed stairs
  • 11.2 m (36.7 ft) or 13.6 m (44.6 ft): Pipe catcher, manual – one wire rope (for 11 m), two wire rope (for 13 m) pipe catcher, bit basket, manual
  • 127 mm (5.0 in) pipe; four pods
  • 140 mm (5.5 in) pipe; four pods
  • 152 mm (6.0 in) pipe; four pods
  • 165 mm (6.5 in) pipe; four pods
  • 178 mm (7.0 in) pipe; four pods
  • 194 mm (7.625 in) pipe; four pods
  • 127 mm (5.0 in) pipe; four pods
  • 140 mm (5.5 in) pipe; four pods
  • 152 mm (6.0 in) pipe; four pods
  • 165 mm (6.5 in) pipe; four pods
  • 178 mm (7.0 in) pipe; four pods
  • 194 mm (7.625 in) pipe; four pods
  • 127 mm (5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 152 mm (6 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 165 mm (6.5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 178 mm (7 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 194 mm (7.625 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 140 mm (5.5 in); two-piece deck bushing, pipe positioner rollers, deck wrench, cross over hammer adapter; pipe wiper seal
  • 165 mm (6.5 in); two-piece deck bushing, pipe positioner rollers, deck wrench, cross over hammer adapter; pipe wiper seal
  • 127 mm (5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 152 mm (6 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 165 mm (6.5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 178 mm (7 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 194 mm (7.625 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
  • 127 mm (5.0 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
  • 140 mm (5.5 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
  • 165 mm (6.5 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
  • 178 mm (7 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
  • 127 mm (5 in)
  • 152 mm (6 in)
  • 165 mm (6.5 in)
  • 178 mm (7 in)
  • 194 mm (7.625 in)
  • Batteries, sealed quantity four (4)
  • Level 1 – Standard fluids and lubricants. With a temperature range of –1° C (30° F) to 52° C (125° F)
  • Decals, ANSI
  • Decals, ISO
  • Certifications, EAEU
  • Certifications, CE
  • Water injection 1271 L (336 gal)
  • Static dust curtains, four sided/boxed enclosed
  • Triple grousers 600 mm (23.6 in); for hard rock 0.88 bar (12.7 psi) ground pressure
  • Triple grousers 750 mm (29.5 in); for soft rock 1.10 bar (15.9 psi) ground pressure

Optional Equipment

  • Compressor (1,350 ft³/min, 500 psi) – DTH drilling package, 38.2 m³ (1,350 ft³/min) at 34.4 bar (500 psi), with high pressure receiver tank (500 psi) for ASME/CRN/AU or CE; includes hammer storage and 113.5 L (30 gal) hammer lubrication system
  • Compressor (1,500 ft³/min, 350 psi) – DTH drilling package, 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) with high pressure receiver tank for ASME/DRN/AU or CE; includes hammer storage and 113.5 L (30 gal) hammer lubrication system
  • Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (Required for autonomy packages)
  • Platform on non-drill-end to mount fire suppression bottles and/or diesel gen set
  • Jib crane ready (Jib crane not included)
  • Premium – Includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass. Removable driller window guard and guard for window facing power train. Additional storage box and windshield wipers on front and rear windows
  • LED Lighting Package:
    Provides 4,200 lumens flood light on perimeter, area spotlights have 1,950 lumens. Mast clearance lights and cab mounted yellow strobe light and a front mounted tram beacon
  • Viewing hatch for hole spotting with spotlight (hydraulically operated)
  • Foldaway trainer’s seat with retractable seat belt
  • Window shades
  • Cabin pressure manometer gauge
  • Cab roof access system (includes ladders, cage and rails)
  • Drill Assist (single pass auto drill)
  • Tool box in deck
  • Hydraulic viewing hatch with spotlight
  • Product Link (Cellular)
  • Product Link (Dual)
  • Terrain for Drilling (guidance system)/with G610 screen
  • Fold up trainer’s seat with seat belt
  • Cabin pressure manometer gauge
  • Window shades
  • Cab roof access system with ladder, cage and rails (only available with cascading stairs and cab walkway)
  • Fuel tank expansion adds 1416 L (374 gal) tank for a total capacity of 2832 L (748 gal); required for autonomy packages
  • Machine access via cascading, hydraulic stairs; includes walkway around cab to drill deck
  • Fire suppression ready; platform to mount fire suppression bottles and/or diesel gen set
  • Jib crane ready (mounting kit only)
  • Toolbox
  • Product Link Elite; satellite, cellular or dual
  • Terrain guidance system hardware
  • Overhead winch assembly with cable and hook, plus with remote control; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
  • Tool lubrication system for Rotary Drilling with 113.5 L (30 gal) capacity
  • Pipe thread greaser with reloadable tank for disposable grease bucket
  • 11.2 m (36.7 ft) Mast; angle drilling – vertical to 30° (in 5° increments)
  • 13.6 m (44.6 ft) Mast; angle drilling – vertical to 30° (in 5° increments)
  • Drill pipe thread greaser with reloadable tank or disposable grease bucket
  • Tool lubrication system for rotary tricone bits 113.5 L (30 gal)
  • Tool lubrication system for DTH hammer and bit (included in HP compressor package)
  • Overhead winch assembly with remote, cable and hook
  • Recommended for Rotary Applications
  • All bits have standard nozzles
  • Obtain S/M/H codes from the Rock Formation to Bit Conversion table https://catpublications.com search for PEXQ1027
  • Ship out plans for each drill configuration allow for one pallet of bits. Additional pallets may require an additional truck.
    – 171 mm (6.75 in), Option 1, (S2)
    – 171 mm (6.75 in), Option 2, (M1)
    – 171 mm (6.75 in), Option 3, (M3)
    – 200 mm (7.875 in), Option 1, (S2)
    – 200 mm (7.875 in), Option 2, (M1)
    – 200 mm (7.875 in), Option 3, (M3)
    – 229 mm (9.0 in), Option 1, (S3)
    – 229 mm (9.0 in), Option 2, (M2)
    – 229 mm (9.0 in), Option 3, (H1)
    – 251 mm (9.875 in), Option 1, (M1)
    – 251 mm (9.875 in), Option 2, (M3)
    – 251 mm (9.875 in), Option 3, (H1)
  • 11.2 m (36.7 ft) Mast: Pipe catcher, hydraulic – one hydraulically actuated pipe catcher, bit basket, hydraulic
  • 13.6 m (44.6 ft) Mast: Pipe catcher, hydraulic – one hydraulically actuated pipe catcher, plus one wire rope pipe catcher, bit basket, hydraulic
  • Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast – Accepts quantity of four (4)
    – 127 mm (5.0 in)
    – 140 mm (5.5 in)
    – 152 mm (6.0 in)
    – 165 mm (6.5 in)
    – 178 mm (7.0 in)
    – 194 mm (7.625 in)
  • Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast – Accepts quantity of four (4)
    – 127 mm (5.0 in)
    – 140 mm (5.5 in)
    – 152 mm (6.0 in)
    – 165 mm (6.5 in)
    – 178 mm (7.0 in)
    – 194 mm (7.625 in)
  • Standard carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast – Accepts quantity of two (2)
    – Quantity of two (2) 7.62 m (25 ft) pipes with adaptors to connect to DTH hammer or tricone bit (hammer and tricone bit not included)
    – 140 mm (5.5 in)
    – 168 mm (6.625 in)
  • Note: *Contact factory for additional pipe diameters
  • Variable grip hydraulic break out wrench range 114 mm to 152 mm (4.5 in to 6.0 in)
  • Variable grip hydraulic break out wrench range 152 mm to 216 mm (6.0 in to 8.5 in)
  • 168 mm (6.625 in); two-piece bushing, pipe positioner rollers, deck wrench, dual purpose carousel, two each 7.62 m (25 ft) pipes plus sub adapters
  • 127 mm (5 in)
  • 140 mm (5.5 in)
  • 152 mm (6 in)
  • 165 mm (6.5 in)
  • 178 mm (7 in)
  • 194 mm (7.625 in)
  • 168 mm (6.625 in) includes long top sub adapter
  • 127 mm (5 in) pipe
  • 152 mm (6 in) pipe
  • 178 mm (7 in) pipe
  • 194 mm (7.625 in) pipe
  • 127 mm (5 in) pipe
  • 140 mm (5.5 in) pipe
  • 152 mm (6 in) pipe
  • 165 mm (6.5 in) pipe
  • 178 mm (7 in) pipe
  • 194 mm (7.625 in) pipe
  • 171 mm (6.75 in) OPT 2, (M1)
  • 171 mm (6.75 in) OPT 3, (M3)
  • 171 mm (6.75 in) OPT 1, (S2)
  • 200 mm (7.875 in) OPT 2, (M1)
  • 200 mm (7.875 in) OPT 3, (M3)
  • 200 mm (7.875 in) OPT 1, (S3)
  • 229 mm (9 in) OPT 2, (M2)
  • 229 mm (9 in) OPT 3, (H1)
  • 229 mm (9 in) OPT 1, (M1)
  • 251 mm (9.875 in) OPT 2, (M3)
  • 251 mm (9.875 in) OPT 3, (H1)
  • DTH Hammer – 152.4 mm (6 in) class with drive sub (all components, less DTH bit assembly)
  • BITS, 2F-FF-S-HD
    171 mm (6.75 in) two flushing holes, flat face with spherical carbides. Heavy duty.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • BITS, 2F-FF-S
    171 mm (6.75 in) two flushing holes, flat face with spherical carbides.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • BITS, 2F-CC-S
    171 mm (6.75 in) two flushing holes, concave with spherical carbides.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • BITS, 2F-CV-S+B
    171 mm (6.75 in) bits, two flushing holes, convex with spherical gauge and ballistic face carbides.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • BITS, 3F-CV-S+B
    171 mm (6.75 in) three flushing holes, convex with spherical gauge and ballistic face carbides.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • BITS, 3F-FF-S+B
    171 mm (6.75 in) three flushing holes, flat face with spherical gauge and ballistic face carbides.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • BITS, 3F-CC-S+B
    171 mm (6.75 in) three flushing holes, concave with spherical gauge and ballistic face carbides.
    Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
  • Fast fill for fuel and water and automated lubrication system
  • Central drain/fill service center for lubricants, fast fill for fuel and water, a blow-down hose and automated lubrication system
  • Bushing retention tool – 102-194 mm (4.0-7.625 in)
  • Work Tools
    – Lifting bails (available on request; required for commissioning)
    • API thread 89 mm (3.5 in)
    • API thread 114 mm (4.5 in)
    • API thread 140 mm (5.5 in)
    • BECO thread 102 mm (4.0 in)
    • BECO thread 114 mm (4.5 in)
    • BECO thread 152 mm (6.0 in)
  • Lifting bails: API thread 89 mm (3.5 in)
  • Lifting bails: API thread 114 mm (4.5 in)
  • Lifting bails: API thread 140 mm (5.5 in)
  • Lifting bails: BECO thread 102 mm (4.0 in)
  • Lifting bails: BECO thread 114 mm (4.5 in)
  • Lifting bails: BECO thread 152 mm (6.0 in)
  • Batteries, sealed quantity six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages
  • Level 2 – Arctic – Temperature down to –18° C (0° F) Arctic fluids and lubricants
  • Level 4 – Temperature down to –40° C (–40° F) 50 hz heating components, high pressure compressor. Arctic fluids. Diesel fired heater for engine coolant, primary water tank and batteries. Heated blankets for receiver tank and water suction line. Junction box with provisions for adding customer supplied shore power connector 240V/50A. If needing 60 hz capability, must order 60 hz battery charger through aftermarket
  • Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains (recommended with dust collector)
  • Tram off spray system
  • Water injection 1271 L (336 gal) plus dry dust collector 127 m³/min (4,500 ft³/min)
  • Water injection, high volume 2786 L (736 gal)
    – Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal)
    – Tank above deck capacity 1514 L (400 gal)
  • Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
  • Tram off spray to wet the ground around the cuttings pile