MD6310
MD6310 Next-Gen Overview
Thiess Review of Terrain for Drilling on MD6310
Thiess Review of MD6310 Drill
MD6310 Launch VideoSPECS SUMMARY
| Bit Load | Up to 42 149 kg (Up to 92,922 lb) |
| Hole Diameter | 203-311 mm (8-12.25 in) |
| Engine | C32® @ 1,800 rpm |
| Components (5) | Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise |
Specifications
| Bit Load | Up to 42 149 kg (Up to 92,922 lb) |
| Hole Diameter | 203-311 mm (8-12.25 in) |
| Engine | C32® @ 1,800 rpm |
| Components (5) | Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 235 mm (9.25 in) |
| Components (3) | Two (2) fan pumps – 1,000 cc (piston, with proportional electronic controls) |
| Features (11) | Rotation Gear Box with dual motor arrangement, up to 160 rpm, and 16,000 N∙m of torque (11,800 ft-lb) |
| Components (4) | Automatic variable speed fan control |
| Receiver Tank Choice (2) | High pressure 34.4 bar (500 psi) for ASME/CR N/AU or CE |
| Components (13) | Mast lock indicator |
| Features (15) | Mast access ladder and grating (option) |
| Package (3) | Premium – Service center for lubricant drain and fill (compressor oil, hydraulic oil, gearbox oil, engine oil, tool lubrication and grease), Automatic Lubrication System, Fast Fill for fuel and water, blowdown hose |
| Components (1) | Alloy drill deck covers, with storage provision |
| High Volume Water Injection System - Not Compatible with Basic Service Package | – Water tanks total capacity 3785 L (1,000 gal) maximum – Primary tank above deck – 1514 L (400 gal) capacity (heated for extreme cold weather) – Secondary tank above deck – 2271 L (600 gal) capacity deck |
| Cameras | – Mounted on the front and left sides to provide 360° view from operator's seat – Camera on the mast to view pipe carousel/top drive operation |
| Components (10) | Radio-ready for communication and entertainment radio |
| Features (7) | Sturdy guardrails, toe guards, self closing gates |
| Components (1) | Two (2) primary pumps – 210 cc (piston, with proportional electronic controls) |
| Cab - Premium | – Leather seat with heat and ventilation – Dual pane window glass – Front window guard – Additional in-cab storage box – Additional windshield wipers on front and rear windows – Window shades (option) – Foldaway trainer’s seat (option) – Removable floor mat |
| Components (6) | Drill depth meter |
| 17.5 m (57.4 ft) Mast - Hoist Capacity | Up to 29 484 kg (Up to 65,000 lb) |
| Components (4) | Heavy duty tow hooks (front end) |
| Components (2) | Electronic compressor control |
| Features | Functional in ambient temperature of 52° C (125° F) |
| Components (4) | Virtual rotary head travel stops and interlocks |
| Components (11) | Cab roof access ladder (option) |
| Components (3) | Manual, centralized, lubrication banks for all pivot points on drill, or automated lubrication system (option) |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary | 9.25 in (235 mm) |
| Components (1) | Spindle with 168 mm (6.625 in) API regular thread and splined collar |
| Components (3) | Deck wrench, sliding |
| Working Weight Range - Minimum/Maximum | 75 800/97 000 kg (167,110/213,848 lb) |
| Width - Rear | 20.73 ft (6.32 m) |
| Choice (2) | Cascading, hydraulic stairs to cab area (option) – includes jack and tram interlock that activates when the stairs are down |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (2) | 8.625 in (219 mm) |
| Components (3) | Rotation torque control |
| Components (10) | Drill pipe thread greaser with remote fill tank or disposable grease bucket (option) |
| Model | Cat® 349E EL Excavator type |
| Components (4) | Shock sub and top sub adapter |
| Components (12) | Dust suppression control |
| Choices (3) | Static dust curtains, four sides boxed in (standard) |
| Components (17) | Tram interlock, mast up and locked or down and parked |
| Option | Bushing Retention Tool 178 to 235 mm (7.00 to 9.25 in) pipe diameter |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions |
| Components (22) | Prewired for Terrain and autonomous operation |
| Components (14) | Trainer’s seat that folds away and has retractable seat belt (optional) |
| Components (5) | Cross over hammer adapter |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) |
| Components (2) | Rotation gear box with dual motor arrangement, up to 160 rpm, and 16 000 N∙m (11,800 lbf-ft) of torque |
| HVAC | – Floor vents in the foot rest area – Roof-mounted air conditioner/heating/pressurizing unit – Filter access from deck, does not require roof access, and has approximately 500 hour service interval – Defogging HVAC vents on driller window |
| Components (8) | Delayed engine shut down |
| Emissions (U.S. EPA Tier 4 Final): Engine | C32 @ 1,800 rpm |
| Compressor - DTH Drilling | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) |
| Features (6) | Sliding deck wrench assembly |
| Components (19) | Cab environment controls (AC, filter, heat, fan speeds) |
| Note | With the compressors variable volume control, the operator can limit air output resulting in reduced fuel consumption – Both high and low pressure compressors contain this feature |
| Components (7) | Drill performance and display system |
| Components (6) | Two swing-out hinged doors with windows and Cat keyed locks |
| Components (8) | DTH hammer storage on drill deck with high pressure configuration (option) |
| Components (5) | Pipe positioner engaged/disengaged indicator |
| Components (11) | Jack pressure sensors in the display |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (2) | 8.625 in (219 mm) |
| Working Weight Range - Minimum/Maximum | 75 500/97 500 kg (166,449/214,950 lb) |
| Components (9) | Rotary head rpm gauge – (digital display in screen) |
| Components (9) | Hydraulically operated viewing hatch in drill deck with spotlight (option) |
| Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life |
| Features (8) | Angle drilling 0-30°; in 5° increments |
| Emissions (U.S. EPA Tier 4 Final): Power Rating ISO 14396 | 1007 HP (751 kW) |
| Triple grousers for hard rock ground bearing pressure 1.59 bar (23.1 psi) | 23.6 in (600 mm) |
| Emissions (Equivalent to Tier 2): Power Rating ISO 14396 | 1031 HP (769 kW) |
| Triple grousers for soft rock ground bearing pressure 1.28 bar (18.5 psi) | 29.5 in (750 mm) |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 2 × 7.62 m (25 ft) pipes; total depth 32.7 m (107.4 ft): Pipe diameter | 9.25 in (235 mm) |
| Lifting Bails (Available on Request) | – 114 mm (4.5 in) API reg thread – 140 mm (5.5 in) API reg thread – 168 mm (6.625 in) for top sub/shock sub API thread – 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread – 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread |
| Mast Accessories Manual, 17.5 m (57.4 ft) Mast | Two wire rope pipe catchers, hydraulically actuated pipe positioner, manual bit basket |
| Angle Drilling | Included with either mast |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements, if needed |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (3) | Full arctic lubricant package includes: engine oil, compressor oil and hydraulic oil |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary (1) | 8 in (203 mm) |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: DTH | 7 in (178 mm) |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (1) | Rated down to –40° C (–40° F) temperatures |
| 17.5 m (57.4 ft) Mast Carousel; holds quantity of 4 × 7.62 m (25 ft) pipes; total depth 48 m (157.5 ft): Pipe diameters | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (5) | Shore power connection box with switchable 240-600V (50 amp) connection; diesel genset and or plug, sold separately |
| Mast Accessories Manual, 13.7 m (44.9 ft) Mast | One wire rope pipe catcher, hydraulically actuated pipe positioner, manual bit basket |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (2) | Diesel fired heating system that heats and circulates engine coolant through the: engine block, primary water tank, heating elements for battery trays with a provision for fuel tanks |
| 12.19 m (40 ft) pipes - pipe rack carousel holds a quantity of four (4) or five (5) pipes, 13.7 m (44.9 ft) Mast: Rotary or DTH | 7.625 in (194 mm) |
| Climate Level 4 Arctic Fluids and Lubricants, Heating Package (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, compressor control box, heat trace for compressor control lines, heat trace for housing from water tank to water pump and water fast-fill assembly plus tank |
| Note | 13.7 m (44.9 ft) Mast Carousel, dual purpose; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
|
| Features (14) | Mast lanyard mounting provisions (option) |
| Components (15) | Tram interlock, machine stability limits |
| Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) |
| Optional Cat Terrain for Drills - Mining System Interface | – Production – Navigation |
| Features (5) | Variable grip hydraulic break out wrench (HOBO) for range of pipe diameters |
| 13.7 m (44.9 ft) Mast - Bit Load - Single Pass | Up to 41 165 kg (Up to 90,753 lb) |
| Mast Accessories Hydraulic (1) | One hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket |
| Cab - Standard | – Fabric seat – Single pane window glass – Windshield wiper for driller window – Window shades (option) – Foldaway trainer’s seat (option) – Removable floor mat |
| Choices (2) | Tram off spray to wet the ground around the cuttings pile (not recommended for cold weather applications) |
| Carrier Rollers | Three (3) |
| Components (18) | Tram interlock, jacks retracted |
| Components (5) | Hinged protective guard for full front drill window |
| Components (1) | Dual starter motors |
| Components (16) | Tram interlock, pipe in hole |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 5 × 12.19 m (40 ft) pipes; total depth 74.6 m (244.9 ft): Pipe diameters | 194 mm (7.625 in), 219 mm (8.625 in) |
| Components (3) | Electric horn activated by push button in the cab |
| Components (12) | Literature holder |
| Components (8) | Three egress points on deck areas in addition to main access |
| Features (4) | Fuel capacity expansion for additional +1609 L (425 gal) |
| Components (21) | Dust curtain lifting system – auto hydraulic raise front and rear (option) |
| Components (3) | Common air intake filters provide +500 hour service interval in normal operating conditions |
| Components (4) | Product Link Elite (hardware from factory, subscription package via dealer) |
| Components (8) | Additional display screen for cc cameras; color, high-definition 254 mm (10 in) |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 178-219 mm (7.0-8.625 in) |
| Features (5) | Bolt-on platform for cold weather generator or fire suppression bottles (option) |
| Components (5) | Scheduled Oil Sampling (S∙O∙S) ports |
| Components (2) | Pipe positioner inserts |
| Choice | Electronic compressor control and regulation with purged air lines |
| Features (7) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH |
| Components (2) | Extended cab option 4.2 m² (45.2 ft²); prewired and dedicated space for refrigerator and microwave |
| Components (11) | Ground level keyed battery disconnect/starter lockout with remote jump start terminals |
| Choice (3) | Cab perimeter walkway available with either choice |
| Components (3) | Deck wrench, sliding |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 47.9 m (Down to 157.4 ft) |
| Features (4) | Feed system accommodates multiple pipe diameters |
| Components (7) | Bit storage box in-deck with hinged cover (option) |
| Note (1) | Hydraulic, indexing pipe carousels accept various pipe diameters |
| 17.5 m (57.4 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) |
| Width - Front | 17.68 ft (5.39 m) |
| Features (13) | Tool oiler 113.5 L (30 gal) oil injection system (Rotary drilling only) |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary (1) | 8 in (203 mm) |
| Components (1) | Coolers with easy cleaning access |
| Features (2) | Pulldown/hoist system is a single cylinder |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 57.4 ft (17.5 m) |
| Components (6) | Walkway around cab to drill deck (option) |
| Length - Mast Down - Standard Cab | 81.69 ft (24.9 m) |
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) temperatures |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) |
| Cable Diameter | 0.5 in (13 mm) |
| Components (3) | Drill assist (single or multipass auto drill) (options) |
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CR N/AU or CE |
| Lighting | – LED interior lights; separate reading light, and backlit joysticks and keypads – Zone controls for area lights and spot lighting for night drilling – Flood lights for the drill perimeter – Spot lights for power group area; drill deck; mast carousel; access ladder and walkways – Standard lighting is Halogen, 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens – Premium lighting is LED, 4,200 lumens flood light on perimeter (option) – Mast clearance lights, cab mounted strobe, front mounted tram beacon (option) |
| Winch Reach - Past The Drill Deck | 20 ft (6.1 m) |
| Components (12) | Air hose retention devices |
| Angle Drilling | Vertical to 30° (in 5° increments) |
| Features (1) | 13.7 m (44.9 ft) or 17.5 m (57.4 ft) Mast configurations complete with pipe rack carousel |
| Features (9) | Drill pipe positioner |
| Capacity Rating | 4000 lb (1814 kg) |
| Components (6) | Wiring for third party interface |
| Components (23) | Data logging of machine health with warnings, and fault code records; export capability |
| Components (7) | Operator station design integrates an ergonomic seat, armchair joystick controls with full instrumentation, and two 254 mm (10 in) color, high definition touchscreens and 12 volt power port |
| Length - Mast Down - Standard Cab | 69.23 ft (21.1 m) |
| Body Length - Standard Cab | 43.54 ft (13.27 m) |
| 13.7 m (44.9 ft) Mast - Hoist Speed | 122.7 ft/min (37.4 m/min) |
| Drawbar Pull | 122971 lbf (547000 N) |
| Components (10) | In-deck mounted battery box |
| Components (10) | Filter indicators for hydraulic, compressor and engine |
| Body Length - Standard Cab | 43.54 ft (13.27 m) |
| Body Length - Extended Cab | 42.24 ft (13.79 m) |
| Note (2) | Configuration choices include single pass, multi pass, vertical out to 30 degree angle drilling |
| Features (12) | Pipe catcher; manual or optional hydraulically actuated |
| 17.5 m (57.4 ft) Mast - Hoist Speed | 122.7 ft/min (37.4 m/min) |
| Width - Rear | 20.74 ft (6.32 m) |
| Components (4) | Ether starting aid; ether bottle supplied locally |
| Components (2) | Separate engine cooling module |
| Package (1) | Basic/Manual – Centralized Manual Lube; Gravity Fill for fuel and water |
| Water injection and dry dust collector (option) | – Water tank capacity 1514 L (400 gal) – 204 m³/min (7,200 cfm) dry dust collector – Self-cleaning filters, with auto-eject dust chute |
| Components (9) | Self-closing, gates secure egress ladder locations |
| Components (4) | Top Sub, or Shock sub and cross over adapter (option) |
| Emissions (Equivalent to Tier 2): Engine | C32 @ 1,800 rpm |
| Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Multi Pass Depth | Down to 74.6 m (Down to 244.9 ft) |
| Track chain guards and guides | Level two |
| Length - Mast Down - Extended Cab | 83.33 ft (25.43 m) |
| Components (5) | Four (4) lift lugs, for use with cables or chains |
| Length - Mast Down - Extended Cab | 70.87 ft (21.62 m) |
| Components (14) | ECM controlled proportional fan speed control system |
| Travel Speed | 1.5 mile/h (2.45 km/h) |
| Package (2) | Standard – Fast Fill for fuel and water; Automatic Lubrication System |
| 13.7 m (44.9 ft) Mast Carousel; holds quantity of 4 × 12.19 m (40 ft) pipes; total depth 62.5 m (204.9 ft): Pipe diameters | 178 mm (7 in), 194 mm (7.625 in), 203 mm (8 in), 219 mm (8.625 in) |
| Components (2) | Four leveling jacks to provide leveling on a 7° bench (any orientation) |
| Compressor - Rotary Drilling (2) | 73.6 m³/min (2,600 ft³/min) @ 7.6 bar (110 psi) |
| Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Components (2) | Scheduled oil sampling (S∙O∙SSM) ports |
| 13.7 m (44.9 ft) Mast - Pulldown Capacity | Up to 39 009 kg (Up to 86,000 lb) |
| Width - Front | 17.68 ft (5.39 m) |
| DTH Drilling - Includes Tool Lubrication and Hammer Storage | 42.2 m³/min (1,500 ft³/min) @ 34.4 bar (500 psi) |
| Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) |
| Components (1) | Two piece bushing |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: Rotary or DTH | 7.625 in (194 mm) |
| Note | Variable speed control |
| Components (3) | Rotary torque control |
| Components (9) | Power convertor 24V to 12V |
| Components (2) | Auto level, auto retract, auto mast |
| 13.7 m (44.9 ft) Mast - Hole Diameter Range 203-311 mm (8-12.25 in) - Single Pass Depth | 44.9 ft (13.7 m) |
| Water Injection - Standard | – Water tank capacity 1514 L (400 gal) |
| Choice (1) | Fixed access ladder to the cab area |
| Components (2) | Pipe positioner inserts |
| Feature | Approach angle of 14 degrees facilitates loading and unloading on a lowboy |
| Components (7) | Mast access ladder with mast grating (option) |
| Mast Accessories Hydraulic (2) | One hydraulic pipe catcher, plus one wire rope, hydraulically actuated pipe positioner, hydraulic bit basket |
| Choices (1) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) |
| Features (6) | Three egress points on deck areas in addition to main access |
| Components (1) | Drill depth indicator and interlocks |
| Components (4) | Tram alarm is automatic and audible |
| Components (6) | Pipe wiper seal |
| Components (13) | Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) |
| Components (20) | Cabin pressure manometer with indicator (option) |
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) temperatures |
| 13.7 m (44.9 ft) Mast - Hoist Capacity | Up to 29 484 kg (Up to 65,000 lb) |
| 17.5 m (57.4 ft) Mast - Hole Diameter Range | 203-311 mm (8-12.25 in) |
| 17.5 m (57.4 ft) Mast - Bit Load - Single Pass | Up to 42 149 kg (Up to 92,922 lb) |
| Components (2) | Seven (7) engine shut down buttons: in cab, at drill deck, on deck at power train, ground accessible by main access point and each side of the drill front and left |
| Features (10) | Overhead winch with remote; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) |
| Components (4) | Virtual rotary head travel stops and interlocks |
| Components (6) | Guards for exhaust pipes and turbo lines |
| Components (4) | Drill performance touchscreen display |
| 7.62 m (25 ft) pipes - pipe rack carousel holds a quantity of four or five pipes, 17.5 m (57.4 ft) Mast: DTH | 7 in (178 mm) |
| Components (5) | Bit sub |
| Components (1) | Roller deck bushing |
| Features (2) | Slip resistant surface |
| Components (5) | Optional Command for Drilling enables each operator to manage more than one machine |
| Compressor - Rotary Drilling (1) | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Features (3) | Fuel tank capacity 1609 L (425 gal) |
| Body Length - Extended Cab | 42.24 ft (13.79 m) |
| Components (6) | Pipe wiper seal |
| Components (3) | Cab perimeter walkway available for both cab sizes |
| Features (3) | Auto tensioning of pull down and hoist cables |
| Components (1) | Spacious FOPS cab has 3 m² (32.4 ft²) floor space with an integrated operator station |
| Height - Mast Up | 65.39 ft (19.93 m) |
| Components (3) | Replaceable cooler core sections |
| Lower rollers | Thirteen (13) |
| Height - Mast Up | 77.99 ft (23.77 m) |
| Components (1) | Stationary rear deck; for vertical and angle drilling |
| Type | Autonomy ready |
| Note | Dual purpose carousel pipe: 13.7 m (44.9 ft) Mast; holds quantity of two (2) 12.19 m (40 ft) pipes and quantity of two (2) 9.14 m (30 ft) pipes, and adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
|
Benefits and Features
The MD6310 crawler-mounted blasthole drill is designed to drill from 203 mm to 311 mm (8 in to 12.25 in) diameter holes in Rotary or DTH (Down The Hole) modes to single pass or multi pass depths.
Optional Equipment
- Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (option) required for autonomy packages
- Overhead winch with remote; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
- Rotary tool lubrication, 113.5 L (30 gal) oil injection system
- Mast access ladder, mast grating and lanyard posts
- Trainer seat that folds away
- Window shades
- Cabin pressure manometer gauge
- Cab roof access ladder
- Bushing Retention Tool 178 to 235 mm (7 to 9.250 in) pipe diameter
- Lifting bails (available on request; required for commissioning)
– 114 mm (4.5 in) API reg thread
– 140 mm (5.5 in) API reg thread
– 168 mm (6.625 in) for top sub/shock sub API reg thread
– 114 mm (4.5 in) for 178 mm (7 in) pipe BECO thread
– 152 mm (6 in) for 194 mm (7.625 in) up to 235 mm (9.25 in) pipe BECO thread
- Product Link Elite – cellular
- Product Link Elite – satellite
- Product Link Elite – Dual (cellular and satellite)
- Terrain for Drilling
- Drill bits, rotary tricone
– 228 mm (9.0 in), OPT 1, (S3)
– 228 mm (9.0 in), OPT 2, (M2)
– 228 mm (9.0 in), OPT 3, (H1)
– 251 mm (9.875 in), OPT 1, (M1)
– 251 mm (9.875 in), OPT 2, (M3)
– 251 mm (9.875 in), OPT 3, (H1)
– 270 mm (10.625 in), OPT 1, (S3)
– 270 mm (10.625 in), OPT 2, (M3)
– 270 mm (10.625 in), OPT 3, (H1)
– 311 mm (12.25 in), OPT 1, (M1)
– 311 mm (12.25 in), OPT 2, (M3)
– 311 mm (12.25 in), OPT 3, (H1)
- Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
- Tram off spray system
- 12.19 m (40 ft) Pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of four
– DTH – 178 mm (7 in)
– Rotary/DTH – 194 mm (7.625 in)
– Rotary – 203 mm (8 in)
– Rotary – 219 mm (8.625 in) - 7.62 m (25 ft) Pipes, 17.5 m (57.4 ft) Mast – Carousel holds quantity of four
– DTH – 178 mm (7 in)
– Rotary/DTH – 194 mm (7.625 in)
– Rotary – 203 mm (8 in)
– Rotary – 219 mm (8.625 in)
– Rotary – 235 mm (9.25 in) Carousel accepts quantity of two - 9.14 m (30 ft) pipes, 13.7 m (44.9 ft) Mast – Carousel holds quantity of two with special sub adapters to connect to DTH hammer and tricone bit (DTH hammer and tricone not included)
– Accepts 194 mm (7.625 in) pipe - Contact factory for additional pipe diameters