Cat Electric Rope Shovels Moodsetter Video Cat Electric Rope Shovels Moodsetter Video
Cat® Electric Rope Shovels: Loading Methods Cat® Electric Rope Shovels: Loading Methods

SPECS SUMMARY

Dipper Payload 50 Sh Ton (45 t)
Dipper Capacity 19.1-38.2 m3 (25-50 yd3)
Note Dependent on application and material density.
Working Weight - With Dipper and Standard Links 1748837 lb (793259 kg)
7295 Electric Rope Shovel


Specifications

Dipper Payload 50 Sh Ton (45 t)
Dipper Capacity 19.1-38.2 m3 (25-50 yd3)
Note Dependent on application and material density.
Working Weight - With Dipper and Standard Links 1748837 lb (793259 kg)
Ballast - Furnished By Customer 352000 lb (159665 kg)
Note (1) These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22 in (8.6 cm)
Ground Bearing Pressure Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - 182.9 cm (72 in) Treads 39 in (269 cm)
Ground Bearing Pressure - Total Effective Bearing Area 315.6 ft² (29.3 m²)
Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
Planetary Propel Dual-motor independent drive.
Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
Upper Works Overall Width - Including Standard Walkways 41.33 in (12.6 cm)
Cutting Height - Maximum 45 ft (13.7 m)
Cutting Radius - Maximum 67.59 ft (20.6 m)
Dumping Height - With Clearance to Open Dipper Door 27.56 ft (8.4 m)
Note (1) Optimal working ranges based on loading a Cat® 785D truck.
Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Radius of Level Floor 48.88 ft (14.9 m)
Revolving Frame Tail Swing Radius 25.59 in (7.8 m)
Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Type Automatic, single-line system for open gear lubricant and grease.
Drive IGBT Acutrol drive system.
Note Other voltages available to suit customer requirements.
Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V
Power Requirements - 60 Hz 4,160V, 7,200V
Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp)
Power Requirements - Peak power 2886 HP (2152 kW)
Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Note High impact ropes available as an option
Standard Rope Data - Boom Suspension - Diameter 2.75 in (70 mm)
Standard Rope Data - Boom Suspension - No. 4
Standard Rope Data - Crowd - Diameter 2.25 in (57 cm)
Standard Rope Data - Crowd - No. 1
Standard Rope Data - Dipper Trip - Diameter 0.625 in (16 mm)
Standard Rope Data - Dipper Trip - No. 1
Standard Rope Data - Hoist - Diameter 2.375 in (60 mm)
Standard Rope Data - Hoist - No. 2
Standard Rope Data - Retract - Diameter 2.25 in (57 mm)
Standard Rope Data - Retract - No. 1
Components (2) External fast fill from lower level.