Dipper Payload120 t (109 t)
Dipper Capacity30.6-62.7 m3 (40-82 yd3)
Rope Data - Dipper Trip - No.1
Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.


-Dipper Payload120 t (109 t)
-Dipper Capacity30.6-62.7 m3 (40-82 yd3)
-Rope Data - Dipper Trip - No.1
-Rope Data - Hoist - Diameter2.75 in (70 mm)
-Rope Data - NoteHigh impact ropes available as an option
-Rope Data - Dipper Trip - Diameter0.75 in (19 mm)
-Rope Data - Hoist - No.2
-Rope Data - Boom Suspension - Diameter3.25 in (83 mm)
-Crowd (1)HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
-Crowd (2)(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
-Dipper Capacities30.6-62.7 m3 (40-82 yd3)
-Rope Data - Boom Suspension - No.4
-Maximum Dumping Height29.53 ft (9 m)
-Note (2)*All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads.
-Radius of Level Floor55.77 ft (17 m)
-Revolving Frame Tail Swing Radius30.51 ft (9.3 m)
-Components (2)External fast fill from lower level
-Note (1)Optimal working ranges based on loading a Cat 797F truck.
-Dumping Height - With Clearance to Open Dipper Door29.53 ft (9 m)
-ComponentsOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-Operating Weight3164000 lb (1435156 kg)
-Cutting Height - Maximum55 ft (16.8 m)
-Cutting Radius - Maximum79.72 ft (24.3 m)
-Dipper Payload120 ton (US) (109 t)
-Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
-Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads41.67 in (12.7 cm)
-Ground Bearing Pressure - NoteGround bearing pressure is dependent upon many factors
-Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads57 m2 (248 kPa); 614 ft2 (36 psi)
-HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-Working Weight - With Dipper and Standard Links3164000 lb (1435156 kg)
-Note (2)All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) treads
-Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)120 t (109 t)
-NoteDependent on application and material density
-Ballast - Furnished By Customer667150 lb (302614 kg)
-Note (1)These weights will vary slightly depending upon dipper and optional equipment selection
-Planetary PropelDual-motor independent drive
-SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
-Power Requirements - 60 Hz7,200V, 13,800V
-Power Requirements - Average Power Demand945-1322 kW
-Power Requirements - Peak power3778 kW
-NoteOther voltage options available to suit customer requirements
-DriveIGBT Acutrol drive system
-Upper Works Overall Width - Including Standard Walkways41.99 in (12.8 cm)
-Components (1)Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
-TypeAutomatic, single-line system for open gear lubricant and grease
-System Voltage - Nominal50/60 Hz, 7,200V

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

View More
View More
View More