Dipper Payload120 t (109 t)
Dipper Capacity30.6-62.7 m3 (40-82 yd3)
Rope Data - Hoist - No.2
Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.


-Dipper Payload120 t (109 t)
-Dipper Capacity30.6-62.7 m3 (40-82 yd3)
-Rope Data - Hoist - No.2
-Rope Data - NoteHigh impact ropes available as an option
-Rope Data - Hoist - Diameter2.75 in (70 mm)
-Rope Data - Retract - No.1
-Rope Data - Dipper Trip - No.1
-Rope Data - Retract - Diameter2.5 in (64 mm)
-Rope Data - Crowd - No.1
-Rope Data - Boom Suspension - Diameter3.25 in (83 mm)
-Rope Data - Boom Suspension - No.4
-Rope Data - Crowd - Diameter2.5 in (64 mm)
-TypeOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-Rope Data - Dipper Trip - Diameter0.75 in (19 mm)
-Dipper Capacities30.6-62.7 m3 (40-82 yd3)
-Note (2)*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads.
-Note (1)Optimal working ranges based on loading a Cat 797F truck.
-Radius of Level Floor56.1 ft (17.1 m)
-Revolving Frame Tail Swing Radius30.5 ft (9.3 m)
-Components (2)External FastFil from lower level
-Dumping Height - With Clearance to Open Dipper Door28.9 ft (8.8 m)
-Cutting Radius - Maximum80 ft (24.4 m)
-Dipper Payload120 ton (US) (109 t)
-Maximum Dumping Height28.9 ft (8.8 m)
-Operating Weight3056000 lb (1386178 kg)
-Cutting Height - Maximum53.5 ft (16.3 m)
-Crowd (2)(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
-System Voltage - Nominal50/60 Hz, 7,200V
-Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads38 ft (11.6 m)
-Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard36 ft (11 m)
-Ground Bearing Pressure - NoteGround bearing pressure is dependent upon many factors
-Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm) Treads36 m2 (380 kPa); 386 ft2 (55 psi)
-Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm) Treads47 m2 (297 kPa); 501 ft2 (43 psi)
-Working Weight - With Dipper and Standard Links3056000 lb (1386178 kg)
-Note (2)All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads
-Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)120 t (109 t)
-NoteDependent on application and material density
-Ballast - Furnished By Customer667150 lb (302614 kg)
-Note (1)These weights will vary slightly depending upon dipper and optional equipment selection
-HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-Planetary PropelDual-motor independent drive
-Power Requirements - Average Power Demand934-1308 kW
-Power Requirements - 60 Hz7,200V, 13,800V
-Power Requirements - NoteOther voltage options available to suit customer requirements
-Power Requirements - Peak power3737 kW
-Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
-Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
-DriveIGBT Acutrol drive system
-SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-Upper Works Overall Width - Including Standard Walkways41.9 ft (12.8 m)
-Components (1)Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
-TypeAutomatic, single-line system for open gear lubricant and grease
-Crowd (1)Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Benefits and Features

Standard Equipment

Optional Equipment

Featured Used Equipment

View More
View More
View More
View More
View More