| Net Power | 21 HP (15.7 kW) |
| Operating Weight | 3913 lb (1775 kg) |
| Dig Depth | 100 in (2540 mm) |
| Engine Model | C1.1 |
| Height | 8.9 in (225 mm) |
| Swing Bearing - Height | 17.5 in (445 mm) |
| Vertical Wall | 74.4 in (1890 mm) |
| Hydraulic System | 6.9 gal (US) (26 l) |
| Maximum Traction Force - Low Speed | 3597 lbf (16 kN) |
| Operating Pressure - Equipment | 3089.3 psi (213 bar) |
| Boom Swing - Left | 65 ° (65 °) |
| Travel Speed - Low | 1.8 mile/h (2.9 km/h) |
| Minimum Ground Clearance Below Undercarriage | 6.1 in (155 mm) |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Boom Swing - Right | 50 ° (50 °) |
| Width* | 39 in (990 mm) |
| Hydraulic Tank | 4.8 gal (US) (18 l) |
| Maximum Dump Clearance | 98.8 in (2510 mm) |
| Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. |
| Maximum Dump Clearance | 96.5 in (2450 mm) |
| Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. |
| Travel Speed - High | 2.7 mile/h (4.4 km/h) |
| Overall Shipping Length* | 141.3 in (3590 mm) |
| Maximum Blade Height | 10.8 in (275 mm) |
| Boom In Reach | 57.5 in (1460 mm) |
| Long Stick | 18 lb (8 kg) |
| Track Belt/Shoe Width | 9.1 in (230 mm) |
| Track Width - Retracted | 39 in (990 mm) |
| Track Width - Retracted | 39 in (990 mm) |
| Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21 HP (15.7 kW) |
| Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. |
| EU: CE Plate Weight*** | 3836 lb (1740 kg) |
| Expandable Undercarriage | 284 lb (129 kg) |
| Fuel Tank | 5.8 gal (US) (22 l) |
| Note (1) | Engine power is tested per ISO 14396:2002. |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Gradeability - Maximum | 30 degrees |
| Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. |
| Auxiliary Circuit - Primary - Pressure | 3089.3 psi (213 bar) |
| Overall Shipping Length* | 142.5 in (3620 mm) |
| Boom Swing - Right | 50 ° (50 °) |
| Steel Tracks | 126 lb (57 kg) |
| Note | European Union Directive “2000/14/EC” |
| Digging Force - Bucket | 3169.8 lbf (14.1 kN) |
| Maximum Operating Weight with Canopy** | 3913 lb (1775 kg) |
| Top Guard | ISO 10262:1998 (Level I) |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
| Tail Swing | 32.3 in (820 mm) |
| Auxiliary Circuit - Secondary - Flow | 3.7 gal/min (14 l/min) |
| Boom Height - Shipping Position | 42.9 in (1090 mm) |
| Machine Swing Speed | 9.8 r/min (9.8 r/min) |
| Note | *Expanded – 1300 mm (51 in) |
| Stick Length | 45.7 in (1160 mm) |
| Bore | 3 in (77 mm) |
| Boom Height - Shipping Position | 40.9 in (1040 mm) |
| Maximum Blade Depth | 10.2 in (260 mm) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) (93 dB(A)) |
| Operating Pressure - Swing | 1493.9 psi (103 bar) |
| O/A Shipping Height | 90.9 in (2310 mm) |
| Maximum Reach | 149.6 in (3800 mm) |
| Boom Swing - Left | 65 ° (65 °) |
| Digging Force - Stick - Long | 1616.4 lbf (7.2 kN) |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Maximum Reach - Ground Level | 146.9 in (3730 mm) |
| Maximum Traction Force - High Speed | 2315.5 lbf (10.3 kN) |
| Pump Flow at 2,400 rpm | 17.4 gal/min (66 l/min) |
| Stroke | 3.2 in (81 mm) |
| O/A Undercarriage Length | 57.5 in (1460 mm) |
| Maximum Blade Height | 10.8 in (275 mm) |
| Displacement | 69 in³ (1.1 l) |
| Swing Bearing - Height | 17.5 in (445 mm) |
| Minimum Operating Weight with Canopy* | 3483 lb (1580 kg) |
| Minimum Ground Clearance Below Undercarriage | 6.1 in (155 mm) |
| Maximum Reach | 155.9 in (3960 mm) |
| Operating Pressure - Travel | 3089.3 psi (213 bar) |
| Cooling System | 1 gal (US) (3.9 l) |
| Engine Oil | 1.2 gal (US) (4.4 l) |
| Maximum Dig Height | 135 in (3430 mm) |
| Maximum Reach - Ground Level | 153.1 in (3890 mm) |
| Stick Length | 37.8 in (960 mm) |
| Maximum Blade Depth | 10.2 in (260 mm) |
| Track Belt/Shoe Width | 9.1 in (230 mm) |
| Auxiliary Circuit - Secondary - Pressure | 3089.3 psi (213 bar) |
| Ground Pressure - Maximum Weight | 4.4 psi (30.6 kPa) |
| O/A Shipping Height | 90.9 in (2310 mm) |
| Auxiliary Circuit - Primary - Flow | 8.7 gal/min (33 l/min) |
| Maximum Dig Height | 137.4 in (3490 mm) |
| Track Width - Expanded | 51.18 in (1300 mm) |
| Boom In Reach | 57.1 in (1450 mm) |
| Digging Force - Stick - Standard | 1843.4 lbf (8.2 kN) |
| Track Width - Expanded | 51.18 in (1300 mm) |
| Dig Depth | 92.1 in (2340 mm) |
| Ground Pressure - Minimum Weight | 4 psi (27.3 kPa) |
| O/A Undercarriage Length | 57.5 in (1460 mm) |
| Vertical Wall | 70.9 in (1800 mm) |
| Tail Swing | 32.3 in (820 mm) |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Gross Power - SAE J1995:2014 | 21.6 HP (16.1 kW) |
Introducing the Next Generation Cat 1-2 Ton Mini Excavators
Overview of the Next Generation Cat 1-2 Ton Mini Excavators
Standard Monitor on the Next Generation Cat® Mini Excavators
Cat 301.5 Mini Excavator Customer Story – Worth Plant Hire (United Kingdom)