| Net Power | 21 HP (15.7 kW) |
| Operating Weight | 4987 lb (2262 kg) |
| Dig Depth | 101.2 in (2570 mm) |
| Engine Model | C1.1 |
| Height | 8.9 in (225 mm) |
| Operating Pressure - Equipment | 3553.4 psi (245 bar) |
| Boom Swing - Left | 65 ° (65 °) |
| Note (1) | Engine power is tested per ISO 14396:2002. |
| Operating Pressure - Swing | 2132.1 psi (147 bar) |
| Stick Length | 37.8 in (960 mm) |
| Overall Shipping Length* | 152.8 in (3880 mm) |
| Swing Bearing - Height | 17.4 in (442 mm) |
| Maximum Reach - Ground Level | 165.7 in (4210 mm) |
| Fuel Tank | 6.9 gal (US) (26 l) |
| Maximum Blade Height | 11.2 in (285 mm) |
| Maximum Operating Weight with Canopy** | 4588 lb (2081 kg) |
| Maximum Reach - Ground Level | 159.1 in (4040 mm) |
| Note | *Expanded – 1400 mm (55 in) |
| Digging Force - Stick - Long | 2203.1 lbf (9.8 kN) |
| Maximum Traction Force - Low Speed | 4496.2 lbf (20 kN) |
| Displacement | 69 in³ (1.1 l) |
| O/A Undercarriage Length | 72.8 in (1850 mm) |
| Boom Swing - Right | 50 ° (50 °) |
| Travel Speed - Low | 1.8 mile/h (2.9 km/h) |
| Note | European Union Directive “2000/14/EC” |
| Note (2) | **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank. |
| Boom In Reach | 65.4 in (1660 mm) |
| Minimum Operating Weight with Cab* | 4535 lb (2057 kW) |
| Note | Net power is tested per ISO 9249:2007 and 80/1269/EEC. |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Gross Power - SAE J1995:2014 | 21.6 HP (16.1 kW) |
| EU: CE Plate Weight with Cab*** | 4718 lb (2140 kg) |
| Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 21 HP (15.7 kW) |
| Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. |
| Expandable Undercarriage | 212 lb (96 kg) |
| Vertical Wall | 72.8 in (1850 mm) |
| Ground Pressure - Minimum Weight | 3.4 psi (23.7 kPa) |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
| Auxiliary Circuit - Secondary - Flow | 3.7 gal/min (14 l/min) |
| Auxiliary Circuit - Primary - Pressure | 3553.4 psi (245 bar) |
| Ground Pressure - Maximum Weight | 3.9 psi (26.8 kPa) |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Note (1) | *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank. |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Gradeability - Maximum | 30 degrees |
| Minimum Ground Clearance Below Undercarriage | 5.9 in (150 mm) |
| Maximum Blade Depth | 11.6 in (295 mm) |
| Minimum Ground Clearance Below Undercarriage | 5.9 in (150 mm) |
| Maximum Traction Force - High Speed | 2967.5 lbf (13.2 kN) |
| Maximum Dump Clearance | 100.8 in (2560 mm) |
| Track Width - Retracted | 42.9 in (1090 mm) |
| O/A Undercarriage Length | 72.8 in (1850 mm) |
| Maximum Dig Height | 142.5 in (3620 mm) |
| Operating Pressure - Travel | 3553.4 psi (245 bar) |
| Vertical Wall | 76.4 in (1940 mm) |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. |
| Machine Swing Speed | 9.8 r/min (9.8 r/min) |
| O/A Shipping Height | 90.6 in (2300 mm) |
| Maximum Operating Weight with Cab** | 4987 lb (2262 kg) |
| O/A Shipping Height | 90.6 in (2300 mm) |
| Auxiliary Circuit - Primary - Flow | 8.7 gal/min (33 l/min) |
| Boom In Reach | 65.4 in (1660 mm) |
| Boom Height - Shipping Position | 42.1 in (1070 mm) |
| Long Stick | 18 lb (8 kg) |
| Tail Swing | 29.5 in (750 mm) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 93 dB(A) (93 dB(A)) |
| Digging Force - Stick - Standard | 2540.3 lbf (11.3 kN) |
| Pump Flow at 2,400 rpm | 17.4 gal/min (66 l/min) |
| Track Belt/Shoe Width | 9.8 in (250 mm) |
| Maximum Dump Clearance | 103.9 in (2640 mm) |
| Maximum Dig Height | 139.8 in (3550 mm) |
| Tail Swing | 29.5 in (750 mm) |
| Track Belt/Shoe Width | 9.8 in (250 mm) |
| Top Guard | ISO 10262:1998 (Level I) |
| Steel Tracks | 132 lb (60 kg) |
| Dig Depth | 93.3 in (2370 mm) |
| Overall Shipping Length* | 153.5 in (3900 mm) |
| Maximum Blade Depth | 11.6 in (295 mm) |
| Auxiliary Circuit - Secondary - Pressure | 3553.4 psi (245 bar) |
| Minimum Operating Weight with Canopy* | 4229 lb (1918 kg) |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Stroke | 3.2 in (81 mm) |
| Engine Oil | 1.2 gal (US) (4.4 l) |
| Boom Swing - Left | 65 ° (65 °) |
| Track Width - Expanded | 55.12 in (1400 mm) |
| Track Width - Expanded | 55.12 in (1400 mm) |
| Boom Swing - Right | 50 ° (50 °) |
| Swing Bearing - Height | 17.4 in (442 mm) |
| Maximum Reach | 161.8 in (4110 mm) |
| Bore | 3 in (77 mm) |
| Digging Force - Bucket | 4406.3 lbf (19.6 kN) |
| Travel Speed - High | 2.7 mile/h (4.4 km/h) |
| Width* | 42.9 in (1090 mm) |
| Maximum Reach | 168.1 in (4270 mm) |
| Boom Height - Shipping Position | 40.2 in (1020 mm) |
| Stick Length | 45.7 in (1160 mm) |
| Maximum Blade Height | 11.2 in (285 mm) |
| Hydraulic System | 6.9 gal (US) (26 l) |
| Track Width - Retracted | 42.9 in (1090 mm) |
| Hydraulic Tank | 4.8 gal (US) (18 l) |
| Cooling System | 1 gal (US) (3.9 l) |
| EU: CE Plate Weight with Canopy*** | 4508 lb (2045 kg) |
Introducing the Next Generation Cat 1-2 Ton Mini Excavators
Overview of the Next Generation Cat 1-2 Ton Mini Excavators
Standard Monitor on the Next Generation Cat® Mini Excavators
Cat 302 CR Mini Excavator Customer Story � Samuel Portaud (France)