303.5 CR Mini Excavator
Introducing the Next Generation Cat 302.7 CR, 303 CR and 303.5 CR Mini Excavators
Overview of the Next Generation Cat 302.7 CR, 303 CR and 303.5 CR Mini Excavators
Standard Monitor on the Next Generation Cat Mini Excavators
How to Select the Correct 3 Ton Cat Next Generation Mini ExcavatorContact Us For Price
SPECS SUMMARY
| Net Power | 23.6 HP (17.6 kW) |
| Operating Weight | 9239 lb (4190 kg) |
| Dig Depth | 122.4 in (3110 mm) |
| Engine Model | C1.7 |
Specifications
| Net Power | 23.6 HP (17.6 kW) |
| Operating Weight | 9239 lb (4190 kg) |
| Dig Depth | 122.4 in (3110 mm) |
| Engine Model | C1.7 |
| Height | 13.8 in (350 mm) |
| Operating Pressure - Travel | 3553 psi (245 bar) |
| Dig Depth | 110.6 in (2810 mm) |
| Note (1) | * Minimum Weight is based on fixed rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight. |
| Long Stick | 44 lb (20 kg) |
| Maximum Dig Height | 197.6 in (5020 mm) |
| Boom In Reach | 73.2 in (1860 mm) |
| Operating Pressure - Equipment | 3553 psi (245 bar) |
| Minimum Operating Weight with Cab* | 7982 lb (3620 kg) |
| Vertical Wall | 88.6 in (2250 mm) |
| Digging Force - Bucket | 7419 lbf (33 kN) |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Cooling System | 1.8 gal (US) (7 l) |
| Travel Speed - Low | 1.6 mile/h (2.6 km/h) |
| Maximum Dig Height | 193.7 in (4920 mm) |
| EU: CE Plate Weight with Canopy*** | 7784 lb (3530 kg) |
| Note | *Overall Shipping Length depends on blade position during shipment. |
| Auxiliary Circuit - Secondary - Flow | 7 gal/min (25 l/min) |
| O/A Shipping Height | 97.6 in (2480 mm) |
| Note | Net power is tested per ISO 9249 and 80/1269/EEC. |
| Boom In Reach | 69.3 in (1760 mm) |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| O/A Undercarriage Length | 87.4 in (2220 mm) |
| Vertical Wall | 94.1 in (2390 mm) |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
| Recyclability | 95% |
| Stroke | 3.9 in (100 mm) |
| Top Guard | ISO 10262:1998 (Level I) |
| Note (2) | Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load. |
| Boom Swing - Right | 34.3 ° (870 mm) |
| O/A Undercarriage Length | 87.4 in (2220 mm) |
| Ground Pressure - Maximum Weight | 5.2 psi (35.7 kPa) |
| Maximum Blade Height | 15.2 in (385 mm) |
| Maximum Blade Height | 15.2 in (385 mm) |
| Engine Oil | 1.6 gal (US) (6 l) |
| Digging Force - Stick - Standard | 4249 lbf (18.9 kN) |
| Maximum Blade Depth | 21.1 in (535 mm) |
| Tail Swing without Counterweight | 35 in (890 mm) |
| Boom Height - Shipping Position | 68.9 in (1750 mm) |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Auxiliary Circuit - Primary - Pressure | 3553 psi (245 bar) |
| Hydraulic System | 11.9 gal (US) (45 l) |
| Note (2) | **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight. |
| Average Exterior Sound Pressure (ISO 6395:2008) | 94 dB(A) (94 dB(A)) |
| Gradeability - Maximum | 30 degrees |
| O/A Shipping Height | 97.6 in (2480 mm) |
| Overall Shipping Length* | 189 in (4800 mm) |
| Pump Flow at 2,400 rpm | 26 gal/min (100 l/min) |
| Boom Swing - Left | 25.2 ° (640 °) |
| Auxiliary Circuit - Primary - Flow | 18 gal/min (70 l/min) |
| Maximum Reach - Ground Level | 202 in (5130 mm) |
| Tail Swing without Counterweight | 35 in (890 mm) |
| Maximum Traction Force - Low Speed | 6969 lbf (31 kN) |
| Hydraulic Tank | 5.3 gal (US) (20 l) |
| Maximum Blade Depth | 21.1 in (535 mm) |
| Net Power @ 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269 | 23.6 HP (17.6 kW) |
| Stick Length | 49.6 in (1260 mm) |
| Digging Force - Stick - Long | 3799 lbf (16.9 kN) |
| Maximum Traction Force - High Speed | 3799 lbf (16.9 kN) |
| Ground Pressure - Minimum Weight | 4.3 psi (29.6 kPa) |
| O/A Track Width | 70.1 in (1780 mm) |
| Fuel Tank | 11.9 gal (US) (45 l) |
| Minimum Operating Weight with Canopy* | 7673 lb (3480 kg) |
| Maximum Reach | 216.9 in (5510 mm) |
| Bore | 3.3 in (84 mm) |
| Boom Swing - Right | 34.3 ° (870 °) |
| Track Belt/Shoe Width | 11.8 in (300 mm) |
| Maximum Reach | 207.5 in (5270 mm) |
| Track Belt/Shoe Width | 11.8 in (300 mm) |
| Maximum Dump Clearance | 137.4 in (3490 mm) |
| Displacement | 104 in³ (1.7 l) |
| Maximum Dump Clearance | 141.7 in (3600 mm) |
| Maximum Reach - Ground Level | 211.8 in (5380 mm) |
| Maximum Operating Weight with Canopy** | 8930 lb (4050 kg) |
| Machine Swing Speed | 9 r/min (9 r/min) |
| Auxiliary Circuit - Secondary - Pressure | 3553 psi (245 bar) |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Overall Shipping Length* | 190.9 in (4850 mm) |
| Boom Swing - Left | 640 ° (25.2 °) |
| Swing Bearing - Height | 22.2 in (565 mm) |
| Operator Sound Pressure (ISO 6396:2008) | 78 dB(A) (78 dB(A)) |
| Maximum Operating Weight with Cab** | 9239 lb (4190 kg) |
| Steel Tracks | 287 lb (130 kg) |
| Note (3) | ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket. |
| Operating Pressure - Swing | 2625 psi (181 bar) |
| EU: CE Plate Weight with Cab*** | 8004 lb (3630 kg) |
| Swing Bearing - Height | 22.2 in (565 mm) |
| Boom Height - Shipping Position | 59.8 in (1520 mm) |
| Travel Speed - High | 2.8 mile/h (4.5 km/h) |
| Stick Length | 61.4 in (1560 mm) |
| Note | European Union Directive ‚ "2000/14/EC" |
| Angle Blade | 353 lb (160 kg) |
| Width | 70.1 in (1780 mm) |
| Note | *Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
| Boom Swing - Right | 50 ° (50 °) |
Benefits and Features
- Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped.
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!
- Strong lift and dig performance helps you get the job done faster. The compact radius design lets you access and work in the tightest areas. Dozer float allows for easy clean up.
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab or canopy lets you reach additional service areas when needed.
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
- The Cat® C1.7 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
- Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).
Standard Equipment
- Cat C1.7 NA Engine (U.S. EPA Tier 4 Final/EU Stage V)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Two Speed Travel
- Fuel Water Separator
- Power on Demand (not available in all regions)
- Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
- Smart Tech Electronic Pump
- Accumulator
- Automatic Swing Brake
- Auxiliary Hydraulic Lines
- One and Two Way Auxiliary Flow
- Continuous Auxiliary Flow
- Auxiliary Line Quick Disconnects
- Tilt-up Canopy or Tilt-Up Cab
- Top Guard ISO 10262:1998 Level I
- ROPS – ISO 12117-2:2008
- TOPS – ISO 12117:1997
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer (optional in some regions)
- Adjustable Wrist Rests
- Washable Floor Mat
- Travel Pedals and Hand Levers
- Machine Security
- Machine Security – Standard Key with Pass Code
- Fabric Suspension Seat (Cab only)
- Vinyl Suspension Seat (Canopy only)
- Hydraulic Lockout – All Controls
- Retractable High Visibility Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- Storage Pocket
- Skylight
- Mounting Bosses for Front
- Signaling/Warning Horn
- Interior Light (Cab only)
- Boom Light, Halogen
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)
– Fuel Level and Coolant Temperature Gauges
– Maintenance and Machine Monitoring
– Performance and Machine Adjustments
– Numeric Security Code
– Multiple Languages
– Hour Meter with Wake Up Switch
– Jog Dial (cab only)
Next Generation Advanced Monitor (Optional)
– Fuel Level and Coolant Temperature Gauges
– Maintenance and Machine Monitoring
– Performance and Machine Adjustments
– Numeric Security Code
– Multiple Languages
– Hour Meter with Wake Up Switch
- Rubber Belt (300 mm/11.8 in wide)
- Dozer Blade
- Dozer Blade Float
- Angle Blade
- Tie Downs on Track Frame
- One Piece Boom (2400 mm/94.5 in)
- Standard Stick (1260 mm/49.6 in)
- Front Shovel Capable – Pin-On
- Thumb Ready (not available in all regions)
- Certified Lifting Eye (optional in some regions)
- 12 Volt Battery
- Software (machine and monitor)
- Maintenance Free Battery
- Signaling/Warning Horn
- 12 Volt Power Socket
Optional Equipment
- Cab with Air Conditioning
- Cab with Heater
- Control Pattern Changer (optional in some regions)
- No Travel Pedals and Hand Levers
- Machine Security – Push to Start with Key Fob/Pass Code
- Vinyl Non-Suspension Seat (Canopy only)
- LED Front Lights
- LED Front and Rear Lights
- LED Boom Light
- Mirrors Left and Right
- Radio – Bluetooth®, Auxiliary, Microphone, USB (charging only) (Cab only)
- Steel Track (300 mm/11.8 in wide)
- Long Stick (1560 mm/61.4 in)
- Front Shovel Capable – Dual Lock Manual Coupler
- Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Hydraulic Quick Coupler Lines (not available in all regions)
- Front Shovel Capable – Hydraulic Coupler
- Battery Disconnect
- Product Link PL243 (regulations apply)
- Product Link PLE643 (regulations apply)
- Travel Alarm (standard in some regions)
- Guard, Canopy
- Guard, Mesh
- Bio Oil Capable
- Eco Drain
- Water Jacket Heater