Cat 313 GC Hydraulic Excavator | Western States Cat

313 GC Hydraulic Excavator

Stick Steer for Cat® Excavators

SPECS SUMMARY

Net Power - ISO 9249	73 HP (54.3 kW)
Operating Weight	30400 lb (13800 kg)
Maximum Digging Depth	19.8 ft (6040 mm)
Engine Model	Cat C3.6

The Cat® 313 GC excavator matches its performance to your job. An updated, larger cab keeps you comfortable all shift long. Combined with fuel-saving features and longer maintenance intervals, the 313 GC provides reliability at a low-cost-per-hour.

Specifications

Net Power - ISO 9249	73 HP (54.3 kW)
Operating Weight	30400 lb (13800 kg)
Maximum Digging Depth	19.8 ft (6040 mm)
Engine Model	Cat C3.6
Engine Power - ISO 14396	74 HP (55.4 kW)
Engine Power - ISO 14396 (DIN)	75 hp (metric) (75 hp (metric))
Net Power - ISO 9249 (DIN)	74 hp (metric) (74 hp (metric))
Bore	4 in (98 mm)
Stroke	5 in (120 mm)
Main System - Maximum Flow	247 L/min (65 gal/min)
Displacement	220 in³ (3.6 l)
Maximum Pressure - Equipment	5075 psi (35000 kPa)
Biodiesel Capability	Up to B20¹
Maximum Pressure - Travel	5075 psi (35000 kPa)
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Maximum Pressure - Swing	3770 psi (26000 kPa)
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Swing Speed	11.5 r/min (11.5 r/min)
Maximum Swing Torque	25888 ft·lbf (35 kN·m)
Fuel Tank Capacity	68.2 gal (US) (258 l)
Cooling System	4 gal (US) (15 l)
Engine Oil	2.1 gal (US) (8 l)
Final Drive - Each	0.8 gal (US) (3 l)
Hydraulic System - Including Tank	22.5 gal (US) (85 l)
Hydraulic Tank	18.5 gal (US) (70 l)
Boom	Reach 4.65 m (15'3")
Stick	Reach R3.0 m (9'8")
Bucket	GD 0.53 m³ (0.69 yd³)
Shipping Height - Top of Cab	9.2 ft (2810 mm)
Handrail Height	9.2 ft (2810 mm)
Shipping Length	25.5 ft (7780 mm)
Shipping Length - with Blade	26.4 ft (8050 mm)
Tail Swing Radius	7.1 ft (2190 mm)
Counterweight Clearance	3 ft (916 mm)
Ground Clearance	1.4 ft (446 mm)
Track Length	12.3 ft (3750 mm)
Length to Center of Rollers	9.9 ft (3040 mm)
Track Gauge	6.5 ft (1990 mm)
Transport Width	8.1 ft (2490 mm)
Boom	Reach 4.65 m (15'3")
Stick	Reach R3.0 m (9'8")
Bucket	GD 0.53 m³ (0.69 yd³)
Maximum Reach at Ground Level	28.4 ft (8660 mm)
Maximum Cutting Height	28.9 ft (8830 mm)
Maximum Loading Height	21 ft (6420 mm)
Minimum Loading Height	5.2 ft (1600 mm)
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	19.2 ft (5860 mm)
Maximum Vertical Wall Digging Depth	17 ft (5190 mm)
Minimum Working Equipment Radius	8.4 ft (2570 mm)
Bucket Digging Force - ISO	22180 lbf (98.67 kN)
Stick Digging Force - ISO	13330 lbf (59.29 kN)
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Benefits and Features

Latest Features

Cab Monitor Improvements.

Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
A notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
Color coded notifications set critical messages apart from the rest.
Use the in-monitor QR code to learn about machine and technology features through a full suite of "how-to" videos.

The standard integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 07E

Fuel Saving Performance Matched to the Job

Use up to 10% less fuel than the 313F GC to keep you moving and productive on the jobsite.
Easily work on slopes and move around the jobsite with 10% more swing torque.
The advanced hydraulic system provides the optimum balance of power and efficiency while providing the control needed for precise digging requirements.
Smart mode meets your power needs by automatically matching engine and hydraulic power to digging conditions.
Get higher production in demanding applications, easier penetration into piles, and faster cycle times with Cat® Advansys™ bucket tips. Quickly change tips with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
The Cat C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on-demand through the VisionLink® online interface.

Lower Maintenance Costs

Expect up to 25% less maintenances costs than the 313F GC.
Quickly check and service your machine with all daily maintenance points accessible from ground level.
Check the engine oil level quickly and safely from the ground. Fill and check engine oil on top of the machine with a conveniently located second dipstick.
The hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000-hour replacement interval – 50% longer than previous filter designs.
The engine does not require diesel exhaust fluid (DEF).
Track your machine’s filter life and maintenance intervals on the in-cab monitor.
Boost productivity with proactive service reminders. The Integrated Vehicle Health Management system alerts the operator with step-by-step service guidance along with parts needed so you don't experience any unnecessary downtime.
S·O·S^SMports are located at ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.

Work in Comfort

Increase operator productivity with a large, comfortable cab.
The cab has a wide seat that adjusts for operators of all sizes.
Advanced viscous mounts reduce cab vibration.
Control the excavator comfortably with easy-to-reach controls all located in front of you.
Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

Reliable, Whatever the Environment

Don’t let the temperature stop you from working. The 313 GC has a standard high-ambient temperature capability of 52° C (125° F) without de-rate and cold-start capability of -18° C (0° F).
Auto warm-up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
The track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
The sloped track frame prevents mud and debris accumulation, helping reduce the risk of track damage.

Simple to Operate

Start the engine with the push of a button, a Bluetooth key fob, or the unique Operator ID function.
Program your preferred power mode and joystick settings using your operator ID. The excavator will automatically remember your selections.
Navigate quickly on the standard high-resolution touchscreen monitor or with the aid of the jog dial control.
The Cat PL161 attachment locator is a Bluetooth device designed to let users know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The PL161 integrates easily into VisionLink® for full fleet management of machines and attachments from one smartphone or tablet dashboard to view location and tracking details.
Save more time and energy with the available work tool recognition feature. A simple shake of the attached tool confirms its identity and ensures all the attachment settings (pressure, flow, and dimensions) are correct so you can work quickly and efficiently.
Not sure how a function works or how to maintain your machine? Simply access the operator’s manual through the touch screen monitor.
Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format. Productivity applications are displayed in grid-view to read on-the-go, and touchscreen navigation is programmed to make sure job performance continues without any hold ups.

Safety

Access all daily maintenance points from ground level – no need for you to climb on top of the machine.
The standard ROPS cab meets ISO 12117-2:2008 requirements.
The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
A ground-level shut-off switch stops all fuel to the engine and shuts down the machine when activated.
A rearview and right-side-view camera are standard, increasing safety and visibility.
The service platform design provides easy, safe, and quick access to the upper service platform. Prevent slipping with the anti-skid punch plate on the platform steps.
Optional boom and stick lowering check valves prevent reverse flow, keeping your front linkage securely in place should the hydraulic system unexpectedly lose power.
Brightly colored seatbelts allow easy recognition of properly utilized safety restraints.
Enhance jobsite safety. Add a swing alarm to alert people when you're rotating from trench to stockpile and back again.
Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.

TAKE THE GUESSWORK OUT OF MANAGING YOUR EQUIPMENT

VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer.*Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
VisionLink® Productivity gathers and summarizes machine telematics and jobsite data from all your equipment regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device - on or off the jobsite.
Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.

*Data field availability can vary by equipment manufacturer.

Sustainability

*All comparisons to 313F GC. Productivity, fuel and CO2 emissions vary by application. CO2 emissions calculations based on a reference work cycle using 2.2 U.S. gallons per hour of #2 U.S. diesel fuel based. Applies IPCC2006 methodology using U.S. EPA Emissions Hub emission factors. Includes DEF (diesel exhaust fluid) related CO2. Fuel measurements are at 15ºC. Estimated average fuel consumption improvements are based on tests or Product Link® data where available. Productivity improvements are based on test data.
** Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
*** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.