374 Hydraulic Excavator

Cat® Super Large Next Generation Excavators: High Production, More Durability, Less Maintenance Cat® Super Large Next Generation Excavators: High Production, More Durability, Less Maintenance
Stick Steer for Cat® Excavators Stick Steer for Cat® Excavators
Request Info

Contact Us For Price


Net Power - ISO 9249484 HP (361 kW)
Operating Weight158200 lb (71700 kg)
Maximum Digging Depth28.1 ft (8570 mm)
Engine ModelCat C15
If you want high production and more durability with less maintenance, the 374 is a terrific choice. With 10 percent more swing torque than the 374F it replaces, you’ll experience faster cycle times. Plus you get two times more structural durability and up to 20 percent less maintenance for longer service life and greater uptime.


Net Power - ISO 9249484 HP (361 kW)
Operating Weight158200 lb (71700 kg)
Maximum Digging Depth28.1 ft (8570 mm)
Engine ModelCat C15
Engine Power - ISO 14396485 HP (362 kW)
Bore5.4 in (137 mm)
Stroke6.7 in (171 mm)
Displacement928 in³ (15.2 l)
Biodiesel CapabilityUp to B20¹
EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 5, and Japan 2014 emission standards.
Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator. Engine speed at 1,700 rpm.
Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Main System - Maximum Flow - Implement237 gal/min (896 l/min)
Maximum Pressure - Equipment5366 psi (37000 kPa)
Maximum Pressure - Equipment - Lift Mode5511 psi (38000 kPa)
Maximum Pressure - Travel5076 psi (35000 kPa)
Maximum Pressure - Swing5076 psi (35000 kPa)
Swing Speed6.34 r/min (6.34 r/min)
Maximum Swing Torque220000 ft·lbf (298 kN·m)
Fuel Tank Capacity243 gal (US) (920 l)
Cooling System19 gal (US) (71 l)
Engine Oil16 gal (US) (62 l)
Swing Drive5 gal (US) (20 l)
Final Drive - Each9 gal (US) (32 l)
Hydraulic System - Including Tank164 gal (US) (620 l)
Hydraulic Tank86 gal (US) (326 l)
DEF Tank21 gal (US) (80 l)
BoomReach 7.8m (25'7")
StickR3.6m (11'10")
BucketSD 3.3 m³ (4.32 yd³)
Shipping Height - Top of Cab11.8 ft (3559 mm)
Handrail Height13 ft (3982 mm)
Shipping Length44.9 ft (13652 mm)
Tail Swing Radius13.8 ft (4171 mm)
Counterweight Clearance4.1 ft (1494 mm)
Ground Clearance2.6 ft (782 mm)
Track Length19.3 ft (5873 mm)
Track Length to Center of Rollers15.5 ft (4705 mm)
Track Gauge11.2 ft (3410 mm)
Transport Width11.1 ft (3400 mm)
NoteTrack gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps
BoomReach 7.8m (25'7")
StickR3.6m (11'10")
BucketSD 3.3 m³ (4.32 yd³)
Maximum Reach at Ground Level43.2 ft (13160 mm)
Maximum Cutting Height41.2 ft (12550 mm)
Maximum Loading Height27.7 ft (8430 mm)
Minimum Loading Height10.1 ft (3310 mm)
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom27.8 ft (8440 mm)
Maximum Vertical Wall Digging Depth22.8 ft (6910 mm)
Bucket Digging Force - ISO80550 ft·lbf (358 kN)
Stick Digging Force - ISO66390 ft·lbf (295 kN)
NoteLong Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight.

Benefits and Features

  • Optional Cat Command remote control allows you to work outside of the cab to help avoid potential hazards.
  • Optional integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.
  • Optional single antenna global navigation satellite system (GNSS) gives you visual and auditory guidance to grade.
  • Optional auxiliary relay powers on and turns off CB radios, beacon lights, and other attachments without you taking your hands off the joysticks.
  • Enhance visibility to make service work easier and safer with optional inspection lighting.
  • Make the jobsite safer with an optional swing alarm.
Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
Build Number: 07C

  • The 374 can load up to 33 trucks per hour with 36 tonne (40 ton) capacity.
  • Swing torque increase of 10 percent makes cycle times faster than the previous series.
  • Multifunctioning is smoother and more efficient with the hydrostatic swing circuit.
  • Enhanced heavy lift mode increases system pressure to help you pick and place heavy material with ease.
  • Booms, sticks, and frames are up to two times more durable than the previous series, which will give you years of reliable performance in the harshest environments.
  • Match the excavator to the job with three operating modes: Power, Smart, and ECO.
  • Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
  • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
  • Don’t let the temperature stop you from working. This excavator has a high-ambient capability of 52° C (125° F) and standard cold start capability of –18° C (-0.4° F).

  • Boost productivity up to 45% versus traditional grading with standard Cat Grade with 2D system – includes indicate-only and laser capability.
  • Standard Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging.
  • Upgrade easily to optional Cat Grade with Advanced 2D or 3D.
  • Automatically stop excavator swing at operator-defined set points in truck loading and trenching applications with Swing Assist.
  • Standard Cat Payload on-board weighing helps you achieve precise load targets and increase loading efficiency with real-time payload estimates.
  • Standard Product Link provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through VisionLink online interface, helping you improve jobsite efficiency with lower operating costs.
  • VisionLink™ helps you remotely manage production targets. The monitor's USB port lets you download your results from one shift all the way up to 30 days of work so you can manage progress without needing an internet connection or VisionLink subscription.
  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.
  • Remote troubleshoot connects you to a dealer service pro to help solve your problem and quickly get you to work.
  • Remote flash works around your schedule to ensure your machine's software is up to date for optimal performance.

  • Choose between Deluxe and Premium cabs – both with automatic climate control.
  • Stay warm with the Deluxe heated seat; stay warm and cool with the Premium heated and ventilated seat.
  • Get in and out of the cab easier using the tip-up left console.
  • Advanced viscous mounts reduce cab vibration up to 50 percent over previous excavator models.
  • Control the excavator comfortably with easy-to-reach controls all located in front of you.
  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
  • Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

  • Start the engine with a push button; use a Bluetooth key fob or the unique Operator ID function.
  • Program each joystick button, including power mode, response, and pattern, using Operator ID; the machine will remember what you set each time you go to work.
  • Program up to four depth and slope offsets so you can easily get to grade without a grade checker – a real time saver and safety enhancer on the jobsite.
  • Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds – all to prevent wear and tear on the attachment and excavator.
  • Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
  • Navigate quickly on the standard high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
  • A second 254 mm (10 in) monitor is available for the Cat Grade with Advanced 2D and Cat Grade with 3D.
  • The Cat PL161 Attachment Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy. The excavator’s onboard Bluetooth reader will locate the device automatically.
  • Save more time and energy with available work tool recognition. A simple shake of the attached tool confirms its identity; it also ensures all the attachment settings are correct so you can get to work quickly and efficiently.
  • Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
  • Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
  • Need more lift during your shift? Auto heavy lift gives you 8% more power when you need it for as long as you need it.

  • Expect up to 20 percent less maintenance cost than the 374F due to reduced hydraulic oil capacity and extended and synchronized service intervals
  • The excavator is auto lube ready with built-in mounting points; an available auto lube retrofit kit provides additional hardware to mount a grease pump and line guards.
  • Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
  • Using Cat genuine oil and filters and doing typical S∙O∙S monitoring will double the current service interval to 1,000 hours, giving you greater uptime to do more work.
  • The advanced air intake filter with pre-cleaner has double the dust holding capacity of the previous air intake filter.
  • The hydraulic oil filter provides improved filtration performance and longer 3,000 hour replacement interval – 50 percent longer than previous filter designs.
  • The high-efficiency hydraulic fan has an automatic reverse function to keep cores free from debris, eliminating the need for any operator interaction.
  • S∙O∙S ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.

  • Standard 2D E-Fence is integrated right out of the factory, which prevents the excavator from moving outside of operator-defined set points.
  • Lift Assist helps you avoid tipping by letting you know if your load is within the excavator’s safe working range limits.
  • Rear and right-hand-sideview cameras are standard. Upgrade to 360° visibility and you’ll easily visualize objects and personnel around the excavator in a single view.
  • See all around the machine with the premium 360° lighting package and its 1800 lm lights on the chassis, cab, boom, sides, and rear.
  • Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
  • A travel direction indicator helps operators know which way to activate the travel levers.
  • Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design.
  • A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.

Standard Equipment

  • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • High-resolution 254 mm (10") LCD touch screen monitor
  • Heated seat with air-adjustable suspension (Deluxe only)
  • Heated and cooled seat with auto adjustable suspension (Premium only)
  • Cat Product Link
  • Remote flash
  • Remote troubleshoot
  • Compatibility with radios and base stations from Trimble, Topcon, and Leica
  • Capability to install 3D grade systems from Trimble, Topcon, and Leica
  • Cat Grade with 2D and offset memory
  • Cat Grade Assist
  • Cat Payload
  • 2D E-Fence
  • Lift Assist
  • Maintenance-free 1,400 CCA batteries (x2)
  • Centralized electrical disconnect switch
  • Three selectable modes: Power, Smart, and Eco
  • Auto engine speed control
  • Up to 4500m (14,760 ft) altitude capability
  • 52°C (126°F) high-ambient cooling capacity
  • -18°C (-0.4°F) cold start capability
  • Hydraulic reverse fan
  • Double element air filter with integrated pre-cleaner
  • Remote disable
  • Boom and stick regeneration circuit
  • Electronic main control valve
  • Dedicated closed loop swing circuit
  • Heavy lift mode
  • Auto hydraulic oil warmup
  • Auto swing parking brake
  • High performance hydraulic return filter
  • Two speed travel
  • Bio hydraulic oil capability
  • Caterpillar One Key security system
  • Lockable external tool / storage box
  • Lockable door, fuel, and hydraulic tank locks
  • Service platform with anti-skid plate & recessed bolts
  • Right hand handrail and hand hold
  • Mirror package
  • Signaling/warning horn
  • Ground-level secondary engine shutoff switch
  • Rearview and right-hand-sideview cameras
  • Auto lube ready
  • Grouped location of engine oil & fuel filters
  • Scheduled Oil Sampling (S·O·S) ports
  • Long variable gauge
  • Standard counterweight
  • Towing eye on base frame

Optional Equipment

  • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • 7.0m (23') Mass boom
  • 7.8m (25'7") Reach boom
  • 2.57m (8'5") Mass stick
  • 2.84m (9'4") Reach stick
  • 3.0m (9'10") Mass stick
  • 3.6m (11'10") Reach stick
  • 4.15m (15'4") Reach stick
  • 4.67m (15'4") Reach stick
  • Cat Stick Steer
  • Auxiliary relay
  • Cat Grade connectivity
  • Cat Grade with Advanced 2D
  • Cat Grade with 3D single GNSS
  • Cat Grade with 3D dual GNSS
  • Laser catcher
  • Premium surround lighting package
  • Cold start block heaters
  • Smart Boom
  • Advanced tool control
  • Medium-pressure auxiliary circuit
  • Quick coupler circuit
  • Cat Command remote control
  • Swing alarm
  • 360° visibility
  • Boom lowering check valve
  • Stick lowering check valve
  • Inspection lighting
  • Integrated vehicle health management
  • Electric refueling pump with auto shutoff
  • QuickEvac maintenance ready
  • Counterweight with removal device
  • 650mm (26") HD double grouser track shoes
  • 750mm (30") HD double grouser track shoes
  • 900mm (35") HD double grouser track shoes