Experience the Cat 6020
Hydraulic Optimization
Contact Us For Price
SPECS SUMMARY
| Engine Output - SAE J1995 | 1040 hp (776 kW) |
| Bucket Payload | 23.8 ton (US) (21.6 t) |
| Operating Weight | 253.8 ton (US) (230.2 t) |
| Note | Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available. |
The 6020 offers class-leading visibility and a cab designed for comfort, safety and efficiency. A walk-through and exchangeable power module contributes to easier serviceability. The 6020 is more fuel efficient than other shovels in its class, delivering efficiency and cost advantages. And its new C32B engine meets emission standards without the need for DEF, saving time and cost during maintenance.
Specifications
| Engine Output - SAE J1995 | 1040 hp (776 kW) |
| Bucket Payload | 23.8 ton (US) (21.6 t) |
| Operating Weight | 253.8 ton (US) (230.2 t) |
| Note | Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available. |
| Equipped With (1) | Quick couplings for: – Diesel fuel – Engine coolant – Pump transmission gear oil – Engine oil (oil pan) – Hydraulic oil |
| Electronic Pump Management Contains (1) | Electronic load limit control |
| Displacement | 1959 in³ (32 l) |
| Buckets Equipped With | – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds |
| Swing Drive | 2 compact planetary transmissions with axial piston motors |
| Operator's Eye Level (approximate) | 18.04 ft (5.5 m) |
| Maximum Pressure - Swing - Acceleration | 4495 psi (310 bar) |
| Maximum Altitude without Deration | 3622 m (11,884 ft) – above sea level (a.s.l.) |
| Net Power - SAE J1349 | 1032 hp (770 kW) |
| Type (5) | Float valve for boom down function |
| Internal Dimensions of Cab - Height | 6.79 ft (2070 mm) |
| Internal Dimensions of Cab - Width | 5.33 ft (1625 mm) |
| Operating Weight | 254 ton (US) (230 t) |
| Components (3) | Heavy-duty air filters |
| Type (2) | Grease supplied to swing roller bearing, all pivot points of attachment, and swing gearbox bearing |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity available whenever engine is running |
| Ground Pressure | 31.9 psi (22 N/cm²) |
| Net Power - SAE J1349 | 1032 hp (770 kW) |
| Capacity - Grease Barrel | 54 gal (US) (205 l) |
| Fuel Tank Capacity | 951 gal (US) (3600 l) |
| Components (1) | Emergency stop buttons inside cab, accessible from all seating locations, and engine module |
| Make and Model | Cat C32 ACERT |
| Components (2) | Dual Diesel Oxidation Catalysts (DOCs) |
| Aspiration | Turbocharged and air-to-air aftercooled |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors |
| Maximum Swing Oil Flow | 216 gpm (783 L/min) |
| Engine Model | Cat® C32 ACERT™ |
| Maximum Digging Reach | 52.17 ft (15.9 m) |
| Type (3) | Boom and stick stress-relieved after welding |
| Standard Bucket Capacity - Backhoe (Heaped 1:1) | 15.7 yd³ (12 m³) |
| Features (3) | Superior cooling efficiency to ensure optimum oil temperature |
| Maximum Pressure - Swing - Deceleration | 5080 psi (350 bar) |
| Net Power - SAE J1349 | 1019 hp (761 kW) |
| Parking Brake | Wet multiple-disc brake, spring-loaded/hydraulically released |
| Components (6) | Auxiliary fold-away seat with safety belt for 3rd person |
| Maximum Pressure - Travel | 4495 psi (310 bar) |
| Equipped With (3) | Indicator light for hydraulic tank full |
| Oil Flow of Cooling Pumps | 211 gpm (800 L/min) |
| Fuel Tank Capacity | 951 gal (US) (3600 l) |
| Bore | 5.71 in (145 mm) |
| Type (1) | Boom and stick torsion-resistant with welded box design |
| Operating Weight | 507500 lb (230200 kg) |
| Maximum Tearout Force | 146125 lb (650 kN) |
| Bore | 5.71 in (145 mm) |
| Diameter - Fan | 4.92 ft (1500 mm) |
| Displacement | 1959 in³ (32 l) |
| Electronic Pump Management Contains (3) | Automatic return of main pumps to zero flow |
| Maximum Pressure - Attachment | 4495 psi (310 bar) |
| Hydraulic Tank Capacity | 740 gal (US) (2800 l) |
| Type (3) | System condition and failures displayed by Board Control System |
| Stroke | 6.38 in (162 mm) |
| Gross Power - SAE J1995 | 1033 hp (771 kW) |
| Stroke | 6.38 in (162 mm) |
| Type (1) | Single-circuit progressive system with hydraulically driven heavy-duty pump and electronic time control |
| Standard Track Pads | 2.62 ft (800 mm) |
| Main Pumps | 6 × variable swash plate pumps |
| Gradeability - Travel Drives | Approximately 54% |
| Filters (3) | Full-flow filters (10 μm) for cooling return circuit |
| Components (3) | All running surfaces of sprockets, idlers, rollers and track chain links hardened |
| Electronic Pump Management Contains (2) | Dedicated circuit pump allocation |
| Internal Dimensions of Cab - Length | 7.32 ft (2230 mm) |
| Support Rollers - Each Side | 3 |
| Emissions | Meets China Nonroad Stage III emissions standards, equivalent to Tier 2 |
| Gross Power - SAE J1995 | 1033 hp (771 kW) |
| Filters (2) | Full-flow filters (10 μm) for complete return circuit |
| Gross Power - SAE J1995 | 1040 hp (776 kW) |
| Battery Isolation Relays | manual lockable disconnect switch and automatic disconnect relay |
| New BCS Features (5) | USB, Lan (TCP/IP) and CAN BUS interfaces for data export |
| Maximum Tractive Force | 265860 lbf (1183 kN) |
| Batteries (12V each) - In Series/Parallel Installation | 630 Ah – 24V |
| No. of Cylinders | 12 |
| Maximum Digging Depth | 26.57 ft (8.1 m) |
| Swing Ring | Triple-race roller bearing with sealed internal gearing |
| Components (6) | Large fuel tank allows for 24 hour machine operation |
| Track Pads - Each Side | 45 |
| Maximum Breakout Force | 164050 lb (730 kN) |
| Components (1) | Forged double-grouser track pads |
| Maximum Total Oil Flow | 621 gpm (2350 L/min) |
| Components (10) | Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated |
| Rated Speed | 1,800 min-1 (1,800 rpm) |
| Features (1) | Open swing circuit with auto slow down when joysticks in neutral |
| Make and Model | Cat C32 ACERT |
| Components (7) | Two-stage fuel filter |
| Components (1) | Large cab floor window with removable grating for easy cleaning |
| Type (4) | Catwalks with rails at boom |
| Components (2) | Chain links connected by hardened pins and bushings |
| Travel Speed - 2nd Stage - Maximum | 1.49 mile/h (2.4 km/h) |
| Gross Power - SAE J1995 | 1040 hp (776 kW) |
| Filters (1) | Full-flow high-pressure filters (100 μm) for main pumps, installed directly behind each pump |
| Components (3) | 9 LED high-brightness working flood lights: – 7 for working area – 2 for rear end |
| Net Power - SAE J1349 | 1019 hp (761 kW) |
| Components (2) | Pneumatically cushioned and multi-adjustable operator seat with lumbar support, safety belt, head- and armrests |
| Components (3) | MEUI™-C fuel system |
| Filters (5) | Transmission oil filter (40 μm) |
| New Board Control System (BCS) Features: | Electronic monitoring, data logging and diagnostic system for vital signs & service data of engines, hydraulic & lube system |
| System Voltage | 24V |
| Components (6) | Audible travel alarm |
| Total Volume of Hydraulic Oil | 925 gal (US) (3500 l) |
| Components (6) | 1 beacon lamp on cab roof |
| New BCS Features (1) | Robust instrument panel including large (254 mm/10 in) color touch screen |
| No. of Cylinders | 12 |
| Components (4) | Fully hydraulic self-adjusting track tensioning system with accumulator |
| Features (2) | All slew ring raceways and grease tub for internal gearing supplied by automatic, central lubrication system |
| Features (2) | Variable electronically controlled flow of oil through cooler and fan speed |
| Components (9) | Roller blinds |
| Components (4) | Hydraulically driven radiator fan with variable electronically controlled fan speed |
| Maximum Digging Height | 45.6 ft (13.9 m) |
| Net Power - ISO 9249 | 1037 hp (774 kW) |
| Rated Speed | 1800 min-1 (1,800 rpm) |
| Components (4) | Two-stage fuel filter |
| Electronic Pump Management Contains (5) | Reduced oil flow of main pumps at high hydraulic oil temperature and at high engine temperature |
| Components (2) | Micro processed engine management |
| Net Power - ISO 9249 | 1024 hp (764 kW) |
| Components (7) | Operator Protective Guard (rock guard; approved according to ISO 10262:1998 [Top Guard]) compliant |
| Maximum Altitude without Deration | 2925 m (9,600 ft) – above sea level (a.s.l.) |
| Components (8) | Windshield with parallel intermittent wiper/washer |
| Components (5) | 7 LED service lights |
| Batteries (12V each) | 6 × 210 Ah |
| Electronic Pump Management Contains (4) | Automatic rpm reduction of engine speed during working breaks |
| Components (1) | Cat NOx reduction system |
| Features | Centralized service area accessible from ground level. |
| Components (2) | Additional ground-level emergency stop |
| Features (1) | Pressure cut-off function for all main pumps |
| Alternator | 275A |
| Bottom Rollers - Each Side | 8 |
| Travel Speed - 1st Stage - Maximum | 0.68 mile/h (1.1 km/h) |
| Components (5) | Micro processed engine management |
| Emissions | Meets Tier 4 Final and Stage V emissions standards |
| Bucket Payload | 24 Sh Ton (22 t) |
| Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released |
| Components (5) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
| New BCS Features (4) | Fault memory capabilities |
| Components (11) | Additional emergency ladder in close proximity to emergency escape window |
| Alternator | 275A |
| Maximum Swing Speed | 4.9 r/min (4.9 r/min) |
| Components (4) | Joystick integrated in adjustable seat armrest |
| Components (5) | Additional high-capacity water separator including electric priming pump |
| Aspiration | Turbocharged and air-to-air aftercooled |
| New BCS Features (2) | On-screen troubleshooting assistance |
| Components (5) | Full sized trainer seat with safety belt and work table |
| Components (6) | Heavy-duty air filters |
| Components (1) | Hydraulically driven radiator fan with variable electronically controlled fan speed |
| New BCS Features (3) | Graphical data logging |
| Components (3) | Safety switch in operator's seat for automatic motion shutdown |
| Components (8) | Additional high-capacity water separator including electric priming pump |
| Filters (4) | Pressure filters (6 μm) for servo circuit |
| Engine Model | Cat C32 ACERT |
| Type (2) | High-tensile steel with solid steel castings at pivot areas |
| Features (2) | Cooling of pump transmission gear oil |
| Components (4) | 2 LED high-brightness access flood lights |
| Components (9) | Large fuel tank allows for 24 hour machine operation |
| Equipped With (2) | Cat jump-start socket |
| Standard Bucket Capacity | 15.7 yd³ (12 m³) |
Benefits and Features
- Operator Protective Guard (Top Guard) certified cab with safety glass windshield.
- Excellent visibility thanks to cab position that provides clear view to the digging and loading areas, in-floor window that provides a view to the tracks, LED lighting, and optional camera monitoring system.
- Multiple emergency shut-off switches, including a pull switch accessible from the ground.
- Safer access and egress with wide anti-slip walkways, retractable 45-degree stairway and three means of egress for fast emergency exit.
- Safer service with lockable battery isolation and starter lockout switch, plus safe access to power module components from machine platform and counterweight.
- Quiet and fully pressurized cab with ergonomic operator seat and controls, superior insulation, extensive in-cab air distribution via powerful HVAC unit and multiple, optimally positioned vents.
- Easily accessible ergonomic joysticks with Electronic-Hydraulic Servo Control, which delivers dynamic and precise response and ensures no hydraulic lines are present in the cab.
- Greater controllability with ergonomic joystick controls and five circuit hydraulics that allow for two-cylinder motions, two travel motions, and swing to be controlled simultaneously.
- Enhanced training capability, with patented 3-seat design, elevated observer’s work station and easily dual in-cab emergency stop buttons.
- 10-inch high-definition color touchscreen display that includes troubleshooting aids and machine documentation.
- Better wear of undercarriage components thanks to floating push tube, which delivers even idler slide wear and extended component life; low wear drive system via induction hardened and high quantity of sprocket teeth; and optional rough terrain undercarriage protection kit.
- Cat exclusive Positive Pin Retention 2 (PPR2) Track design, which resists pin walking and link cracking for reliable sealing and maximum track life.
- Structures designed and fabricated to withstand the toughest digging conditions, with high-strength steel; full penetration, profiled and ground welds at critical junctures; and booms and sticks that are stress-relieved after welding.
- Efficient Independent Oil Cooling system, which protects and extends the life of hydraulic components.
- New heavy-duty rolled track shoe offers extended life thanks to an updated manufacturing process and higher-strength material. We've also moved from two size offerings to three (750 mm, 950 mm and 1200 mm), allowing these track shoes to provide lower ground pressure for a wider range of applications.
- Greater efficiency through Hydraulic Optimization, which dynamically assigns individual pumps or groups of pumps to deliver the exact flow and pressure that each hydraulic function requires.
- New C32B engine offers even greater durability and reliability than its predecessor, with a higher flow oil pump, new cylinder head, and more. Increased piston compression height enables higher power in select applications.
- Engine optimized for low fuel consumption at 1,800 rpm and lower speeds, plus significant gains in fuel consumption through collaboration of engine and machine integration.
- Maximum uptime, without work interruption for regeneration, engine derate, or cold weather treatment of secondary fluid.
- Buckets and ground engaging tools (GET) designed to maximize durability and productivity and ideally matched to your shovel and application.
- Integrated to work as part of a machine system — helping you achieve high productivity and the lowest cost per ton.
- Variety of sizes and wear packages for the ideal match to your shovel and application.
- Four tip shapes of hammerless GET designed specifically for the 6020, with no special tools required for removal and installation.
- Wear packages that protect your investment, including special liner material and lip shrouds, wing shrouds and heel shrouds.
- Greater connectivity with improved Product Link™ Elite system, which increases the availability of data provided by the 6020 and allows it to collect and transmit information into locally hosted or cloud-hosted applications such as Cat MineStar™ Solutions Health Office, Health Equipment Insights, or Equipment Care Advisor.
- Earliest possible detection of faults, with Board Control System that uses sensors throughout the machine to monitor operating data, record faults, and notify the operator audibly and visually.
- Factory-ready for Cat MineStar™ Solutions, with a range of capabilities that meet the needs of your fleet.
- Modular design that facilitates quick field assembly — as few as 14 days in typical condition.
- Exchangeable power module that can be quickly swapped out for a spare, then transported for repair in a safe, convenient and clean environment.
- Exceptional component accessibility and weather protection via first-in-class and spacious walk-through power module.
- Superior swing system component accessibility via boom-mounted hydraulic valve block, and ground-level accessible service fluid fill points and jump start receptacle.
- Simplified undercarriage serviceability, with automatic track tensioning system, which requires no manual adjustment; externally serviceable break; and PPR2 Tracks that are easily serviced with a master joint.
- Highly regulated C32B engine certified to meet U.S. EPA Tier 4 Final/EU Stage V emissions standards without the need for DEF — saving time and cost during maintenance.
- Sound-suppressed power module to keep spectator sound levels low.
- Preservation of raw materials, energy conservation and reduced emissions through the Cat Reman and Cat Rebuild programs, which return end-of-life components to like-new condition.
Standard Equipment
- 2 x Cat C32B engines
- Aftertreatment system (used in Tier 4 Final only): - Diesel Oxidation Catalyst (DOC) - NOx Reduction System (NRS) - Non-DEF solution
- Air-to-Air After Cooling (ATAAC)
- Turbocharger
- Hydraulically driven radiator fan
- Electronically controlled fan speed
- Micro processed engine management
- Cat Clean Emission Module (CEM) air filters
- Two-stage fuel filter with series filtration
- High-capacity water seperator
- Starting aid - automatic ether
- Exhaust manifold and turbo heat shields
- Dual 24 V electric starters per engine
- Automatic engine idle shut down
- Automatic fuel priming
- Pump managing system with: - Electronic load limit control - Flow on demand - Automatic zero flow regulation - Automatic engine RPM reduction - Reduced oil flow at high hydraulic oil or engine temperature
- Pressure cut - off for main pumps
- Cat Hydraulic Hose assemblies
- Hydraulic Optimization
- Cooling of pump transmission gear oil
- Open loop swing circuit
- Pressure testing poings
- Full-flow high-pressure filters (100 µm), main pumps
- Full-flow filters (10 µm), return circuit
- Full-flow filters (10 µm), cooling return circuit
- Pressure filters (6 µm), servo circuit
- Transmission oil filters (40 µm)
- Boom float valve
- 6 batteries
- Lockable battery isolator switch
- Lockable starter isolator switch
- 9 LED high-brightness working flood lights
- 7 LED service lights
- Travel alarm - forward and reverse
- Electric Horn
- Forged double-grouser track pads
- 800 mm (2 ft 8 in) wide track pads
- HD fixed axle carrier and load rollers
- Automatic hydraulic retarder valve
- Hinged travel motor covers
- Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
- Fully hydraulic self-adjusting track tensioning system with piston accumulators
- Grease filters (200 µm)
- Single HVAC system
- In-floor window with removable grate
- Pneumatically cushioned and multiadjustable comfort seat with: - Lumbar support - Head and arm rests - Safety switch for automatic motion shutdown
- Independently adjustable seat consoles with integrated joysticks
- Electronic-Hydraulic Servo Control
- Elevated full-size trainer seat with 2-point safety belt and laptop desk
- FM/AM radio with USB and AUX input
- Additional fold-away auxiliary seat with 2-point safety belt
- Three cup holders
- Parallel intermittent wiper/washer
- Roller blinds at all windows
- Monitoring system with 254 mm (10 in) color touchscreen
- Cat Board Control system: - 254 mm mm (10 in) color touchscreen - On-screen troubleshooting assistance - On-screen graphic charts of logged data - Fault memory of related conditions - USB, LAN (TCP/IP) and CAN BUS interfaces for data export
- Control and Monitoring Platform (CAMP)
- Powered 45° access stairway
- One mirror on Left Hand (LH) side
- Document storage
- Internal service access in boom
- Boom and stick thermally stress relieved after welding
- Catwalks with rails at boom
- Wear Package (as per bucket selection)
- Cat MineStar™ Solutions ready
- Engine oil exchange interval - 500 hours
- Hydraulic oil change interval - 10,000 hours
- S·O·SSM sampling ports
- Cat CEM air filters with precleaner dust ejection system
- Ground level service station with quick couplings for: - Diesel fuel - Engine coolant - Pump transmission gear oil - Engine oil - Hydraulic oil - Grease
- Cat battery charging connector
- Indicator lights
- Emergency stop switches in cab, engine module, 1 pull rope accessible from ground level
- Operator Protective Guard (Top Guard)
- All-round safety glass
- Emergency egress ladder
- ISO or American National Standards Institue (ANSI) decals