14 Motor Grader







SPECS SUMMARY
Base Power (1st Gear) - Net | 238 HP (178 kW) |
Operating Weight - Typically Equipped | 57250 lb (25968 kg) |
Blade Width | 14 ft (4.2 m) |
Engine Model | Cat C13 |
Specifications
Base Power (1st Gear) - Net | 238 HP (178 kW) |
Operating Weight - Typically Equipped | 57250 lb (25968 kg) |
Blade Width | 14 ft (4.2 m) |
Engine Model | Cat C13 |
Bore | 5.1 in (130 mm) |
Stroke | 6.2 in (157 mm) |
Speed at Rated Power | 1,850 rpm |
Arc Radius | 16.3 in (413 mm) |
Throat Clearance | 4.6 in (117 mm) |
Maximum Depth of Cut | 23.3 in (593 mm) |
Torque Rise | 41% |
Maximum Shoulder Reach Outside of Tires - Left | 73.6 in (1870 mm) |
Circle Centershift - Left | 25.6 in (650 mm) |
Maximum Lift Above Ground | 16.5 in (419 mm) |
Circle Centershift - Right | 20.5 in (520 mm) |
Blade Tip Range - Backward | 5° |
Maximum Shoulder Reach Outside of Tires - Right | 78.9 in (2004 mm) |
Moldboard Sideshift - Right | 31.1 in (790 mm) |
Moldboard Sideshift - Left | 29.1 in (740 mm) |
Blade Tip Range - Forward | 40° |
Blade Width - Without End Bits | 164 in (4166 mm) |
Note (3) | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Gross Vehicle Weight - Base* - Total | 50980 lb (23124 kg) |
Gross Vehicle Weight - Base* - Front Axle | 13994 lb (6344 kg) |
Gross Vehicle Weight - Typically Equipped - Total | 57250 lb (25968 kg) |
Gross Vehicle Weight - Typically Equipped - Rear Axle | 42005 lb (19053 kg) |
Gross Vehicle Weight - Typically Equipped - Front Axle | 15245 lb (6915 kg) |
Gross Vehicle Weight - Base* - Rear Axle | 36994 lb (16780 kg) |
Note (5) | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
Note | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
Blade Height - Without Cutting Edge | 23 in (585 mm) |
Blade Height - With Cutting Edge | 24.9 in (631 mm) |
Maximum Altitude - Full Power | 13900 ft (4237 m) |
Blade Width - With End Bits | 169 in (4290 mm) |
Maximum Torque - VHP Plus | 1137 lb/ft (1542 N·m) |
Emissions | Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
Maximum Altitude - Full Power (Tier 3) | 14349 ft (4374 m) |
Maximum Altitude - Full Power (Tier 2) | 12049 ft (3672 m) |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Standard - Fan Speed - Minimum | 550 rpm |
Note (4) | Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
Circle - Outer Diameter | 71.7 in (1822 mm) |
Front Axle - Wheel Lean - Left/Right | 17.1° |
Front Axle - Total Oscillation per Side | 32° |
Transmission and Differential | 23.5 gal (US) (89 l) |
Diesel Exhaust Fluid Tank (Tier 4 Only) | 5.8 gal (US) (22 l) |
Hydraulic System | 33 gal (US) (125 l) |
Circle Drive | 1.8 gal (US) (7 l) |
Cooling System | 15.9 gal (US) (60 l) |
Fuel Tank | 109.9 gal (US) (416 l) |
Note (2) | Optimized VHP Plus is standard for the 14M3. |
Standard Capability | 122 °F (50 °C) |
Standard - Fan Speed - Maximum | 1,600 rpm |
Displacement | 763 in³ (12.5 l) |
Number of Cylinders | 6 |
Benefits and Features
- Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
- Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
- Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
- Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
- Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
- Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
- Standard VHP Plus provides ideal amount of power in all gears.
- Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
- Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
- Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
- Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.
- Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
- Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
- Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
- Optional rear vision camera enhances sight to rear of machine.
- Electrical disconnect and engine shutoff switches are ground level.
- Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
- Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
- Optional seat belt indicator promotes safe operating habits.
- Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
- Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
Standard Equipment
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- Joystick, power adjustable armrests
- Air conditioner with heater
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
- Gauges, machine level
- Message display
- Joystick gear selection
- Joystick hydraulic controls for implements, steering, transmission
- Ladders, cab, left and right side
- Lights, left and right side lights
- Lights, night time cab, LED
- Meter, hour, digital
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio ready, entertainment
- ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
- Seat, mechanical suspension, cloth
- Storage compartments
- Throttle control, electronic
- Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
- Articulation, automatic Return-to-Center
- Air-to-Air After Cooler (ATAAC)
- Auto Diff Lock
- Brake wear indication
- Brakes, oil disc, four-wheel, hydraulic
- Consistent power to ground
- Monitoring system
- Clutch, circle drive slip
- Differential, lock/unlock*
- Drain, engine oil, ecology
- Demand fan, hydraulic
- Engine ECO Mode
- Ether starting aid
- Fuel tank, ground level
- Fuel-water separator
- Hydraulic demand fan
- Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
- Optimized VHP
- Parking brake - multi disc, sealed, oil-cooled
- Priming pump, fuel
- Sediment drain, fuel tank
- Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
- Transmission, 8F/6R, power shift, direct drive
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, HD, 1,125 CCA
- Breaker panel
- Electrical system, 24V*
- Belt, serpentine, automatic tensioner
- Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
- Product Link
- Starter, electric
- Service lights, enclosure, rear, LED
- Alarm, back up
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Lockout, hydraulic implement for roading
- Operator Not Present Monitoring system
- Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
- Seat belt, retractable 76 mm (3 in)
- Secondary steering
- Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
Optional Equipment
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- Air horn
- Heated door
- Mirrors high visibility
- Mirrors, outside heated 24V
- Mirrors, outside mounted
- Seat, heated
- Seat, heated/ventilated
- Rearview camera
- Seat belt indicator
- Transmission, autoshift
- Engine, compression brake
- Cat GRADE with Cross Slope
- Stable Blade
- Advanced Control Joysticks
- Auto Articulation
- Debris guard
- Front axle cylinder guards
- Rear fenders
- Sound suppression, engine enclosure and transmission
- Transmission guard
- Accumulators, blade lift
- Fast fill fuel, 378.5 L/min (100 gal/min)
- Metallic DCM wear strips
- Light, LED, warning strobe
- Lights, front headlights high
- Lights, front headlights low
- Mounting, for warning light
- Working lights halogen
- Working lights LED
- Additional rearview camera and monitor
- Machine security system key
- Moldboard, 4.9 m (16 ft)
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
- Product Link satellite, cellular
- Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
- Snow wing, mounting frame ready
- Fast fill
- 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
- Push block, counterweight
- Ripper, rear
- Tooth, ripper
- Coolant, -51 degrees C (-60 degrees F)