Cat® 255 and 265 Compact Track Loaders
Cat® 255 and 265 Compact Track
Cat® 265 Compact Track Loader Customer Story – Ford Companies (North Carolina)Contact Us For Price
SPECS SUMMARY
| Gross Power - SAE J1995 | 74 HP (55.2 kW) |
| Rated Operating Capacities - 35% Tipping Load | 2823 lb (1280 kg) |
| Operating Weight | 10492 lb (4759 kg) |
| Breakout Force - Lift Cylinder | 6739 lb (3057 kg) |
Specifications
| Gross Power - SAE J1995 | 74 HP (55.2 kW) |
| Rated Operating Capacities - 35% Tipping Load | 2823 lb (1280 kg) |
| Operating Weight | 10492 lb (4759 kg) |
| Breakout Force - Lift Cylinder | 6739 lb (3057 kg) |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| Bucket Pin Height - Carry Position | 8.4 in (213 mm) |
| Bore | 4.3 in (110 mm) |
| Travel Speed - Forward or Reverse - One Speed | 5 mile/h (8 km/h) |
| Bucket Pin Height - Maximum Lift | 132 in (3354 mm) |
| Breakout Force - Tilt Cylinder | 8680 lb (3937 kg) |
| Cooling System | 2.8 gal (US) (10.7 l) |
| Counterweight Adds to Operating Weight | 276 lb (125 kg) |
| Displacement | 171 in² (2.8 l) |
| Travel Speed - Forward or Reverse - Two Speed | 8.1 mile/h (13 km/h) |
| Counterweight Adds to Operating Weight - ROC (35%) | 173 lb (78 kg) |
| Ground Contact Area - With 450 mm/17.7 in Track | 2268 in² (1.46 m²) |
| Net Power - ISO 9249 | 73 HP (54.4 kW) |
| Engine Crankcase | 2.2 gal (US) (8.2 l) |
| Bucket Pin Reach - Maximum Lift | 9.8 in (249 mm) |
| Clearance at Maximum Lift and Dump | 104.5 in (2655 mm) |
| Net Power - SAE 1349 | 74 HP (54.9 kW) |
| Counterweight Adds to Operating Weight - Tip Load | 494 lb (224 kg) |
| Fuel Tank | 31.7 gal (US) (120 l) |
| Departure Angle | 28.2° |
| Peak Torque at 1,360 rpm SAE J1995 | 280 lb/ft (380 N·m) |
| Hydraulic System | 9.7 gal (US) (36.8 l) |
| Enclosed Cab Adds to Operating Weight | 180 lb (82 kg) |
| Stroke | 3.5 in (90 mm) |
| Hydraulic Tank | 6.9 gal (US) (26 l) |
| Ground Clearance | 8.5 in (216 mm) |
| Enclosed Cab Adds to Operating Weight - ROC (35%) | 75 lb (34 kg) |
| Height - Top of Cab | 83.3 in (2115 mm) |
| Ground Pressure - With 450 mm/17.7 in Track | 4.6 psi (31.9 kPa) |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 60.9 HP (45.4 kW) |
| Enclosed Cab Adds to Operating Weight - Tip Load | 214 lb (97 kg) |
| Rated Operating Capacities - 50% Tipping Load | 4033 lb (1829 kg) |
| Hydraulic Flow - High Flow - Loader Hydraulic Flow | 30 gal/min (113 l/min) |
| Note | *Operating Weight, Operating Specifications, and Dimensions are based on 2036 mm (80") low profile bucket with bolt on cutting edge, 450 mm (17.7") wide track, 75 kg (165 lb) operator, open canopy, mechanical suspension seat, HD battery with disconnect, standard flow hydraulics, manual coupler, and full fluids. No external counterweights, and no dual self-level/return-to-dig/work tool positioner |
| Length - Track on Ground | 64 in (1626 mm) |
| Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 3500 psi (24130 kPa) |
| Rated Operating Capacity with Optional Counterweight | 2996 lb (1359 kg) |
| Length - With Bucket on Ground | 140.9 in (3580 mm) |
| Length - Without Bucket | 116.1 in (2950 mm) |
| Tipping Load | 8066 lb (3659 kg) |
| Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 80.7 HP (60.2 kW) |
| Operating Weight - ROC (35%) | 2823 lb (1280 kg) |
| Operating Weight - ROC (50%) | 4033 lb (1829 kg) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 34 gal/min (129 l/min) |
| Maximum Overall Height | 164.3 in (4173 mm) |
| Maximum Reach - With Arms Parallel to Ground | 46.7 in (1187 mm) |
| Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 4061 psi (28000 kPa) |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 46.4 HP (34.6 kW) |
| Operating Weight - Tip Load | 8066 lb (3659 kg) |
| Overall Length - Track | 83.7 in (2126 mm) |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 23 gal/min (86 l/min) |
| Rack Back Angle - Maximum Height | 85.3° |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3500 psi (24130 kPa) |
| Reach at Maximum Lift/Dump | 25.1 in (638 mm) |
| Roll Back Angle | 27° |
| Turning Radius from Center - Bucket (racked) | 87.8 in (2229 mm) |
| Turning Radius from Center - Coupler | 56.5 in (1436 mm) |
| Turning Radius from Center - Machine Rear | 68.5 in (1741 mm) |
| Vehicle Width (450 mm/17.7 in tracks) | 75.8 in (1925 mm) |
| Maximum Dump Angle | 46.4° |
| Engine Model | Cat® C2.8TA (turbo after-cooled) |
Benefits and Features
Redesigned Operator Station
Redesigned Operator Station delivers a larger operating environment, and combined with additional seat travel, the 265 provides more space for operators of any size. The optional one-piece, sealed, and pressurized cab offers a clean and quiet workspace with excellent air distribution through optimally placed vents throughout the cab.
Ventilated and heated high-back air ride seat
Available ventilated and heated high-back air ride seat with seat mounted adjustable joystick controls deliver industry-leading operator comfort.
High-performance power train
High-performance power train provides selectable settings for drive power priority and maximum travel speed (overdrive) to customize the machine performance to match the task.
Three levels of auxiliary hydraulic performance
Three levels of auxiliary hydraulic performance available Standard Flow, High Flow, and High Flow XPS. Standard flow for attachments that require a base level of auxiliary flow and horsepower, High Flow boosts the auxiliary flow for applications that demand additional hydraulic flow for increased attachment performance, and the High Flow XPS hydraulic system provides maximum auxiliary hydraulic performance by delivering additional flow and additional pressure for the most demanding attachments and applications
Electronically controlled Cat C2.8TA engine
Electronically controlled Cat C2.8TA (turbo after-cooled) engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards while delivering maximum horsepower across a wide RPM range and providing high torque for increased working performance, no matter the application
Torsion suspension undercarriage and two-speed travel
Standard torsion suspension undercarriage and standard two-speed travel, combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity, and greater operator comfort.
Advanced Touchscreen Monitor
The 20.3 cm (8-inch) Advanced Touchscreen Monitor offers cutting-edge functionality and control that includes an integrated radio, Bluetooth® connectivity, and multi-camera (side-view) option, and supports 32 different language choices.
Advanced Joysticks
Maximize machine capability and control with the Advanced Joysticks. The Advanced Joysticks provide unmatched control of machine functions and adjustments within the display without the operator having to remove his hands from the controls. This includes the on-joystick navigation of the Advanced Touchscreen Monitor, radio volume up/down/mute, creep activation, creep on/off, creep speed increment/decrement, one-button Smart Attachment control activation, and additional auxiliary control buttons that deliver single-button control of complex attachment functions
Ground-level access
Ground-level access to all daily service and routine maintenance points help reduce machine downtime for greater productivity.
Broad range of performance-matched Cat Attachments
Broad range of performance-matched Cat Attachments make the Cat Compact Track Loaders the most versatile machine on the job site.
Standard Equipment
- Quick Coupler: Manual or Hydraulic
- High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
- Steel Imbed Rubber Track – 450 mm (17.7 in) bar tread, 450 mm (17.7 in) block tread
- Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange Front/Rear Idlers
- Performance Package HP1: Standard Flow Hydraulics
- Performance Package HP3: High Flow XPS Hydraulics
- Open canopy: Cup Holder, Cell Phone Pocket, choice of vinyl Seat (Mechanical Suspension, High Back/Heated/Air Ride Seat)
- Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
- T2 – Standard Display, Standard Joysticks, traditional Key Start switch, and Rear-view camera.
- T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
- T5 – T4 + 2 additional side view cameras.
- Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
- Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
- Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone. Only for use with enclosed cab. Availability varies by country.
- Product Link™ Basic series PL243
- Product Link Elite series PLE643
- On-demand, variable speed hydraulic cooling fan
- On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
- HD0 – base guarding and sealing (engine air inlet rain cap, front cab to-frame sealing, and hydraulic fill access door)
- HD1– intermediate guarding and sealing† (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding.) †Some equipment varies by region.
- HD2 – most comprehensive guarding and sealing† (HD1 + turbo guard, exhaust stack wrap, DPF wrap, quick disconnect guarding, fully enclosed drive line guarding, under step hydraulic lines guard cover, engine air inlet pre-cleaner.)
- Work Tool Electrical Harness
- Heavy duty battery
- Battery disconnect with lockout feature
- 12-volt Electrical System
- 85 Ampere Alternator
- LED Work Lights
- Auto Reverse Lights
- Switch Backlighting
- Interior LED Dome Light
- Backup Alarm
- Electrical Outlet, Beacon
- Exterior Courtesy Lighting
- Automatic Work light notification flash when parking brake is released
- Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (× 32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
- Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking
- Brake Engages
- ROPS Cab, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Headliner
- Interior Rearview Mirror
- Horn
- Hand (Dial) Throttle, Electronic
- Seat Mounted Joystick Controls
- Cell Phone Storage Pocket
- Cup Holder
- 12-volt power port
- Foot Throttle
- Selectable control pattern – ISO or H
- Electro/hydraulic implement control
- Electro/hydraulic hydrostatic transmission control
- Speed sensor guarding
- Heavy duty flat faced quick disconnects with integrated pressure release lever
- Hydraulic oil level sight gauge
- Cat C2.8TA turbocharged, after-cooled diesel engine, meeting Tier 4 Final and Stage V Emission Standards: • Glow plugs starting aid • Liquid cooled, direct injection
- Extended life antifreeze (–37° C, –34° F)
- Air cleaner, dual element, radial seal
- Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil
- Ecology drain – coolant
- Radiator coolant level sight gauge
- Radiator expansion bottle
- Filter, hydraulic supply, cartridge type
- Filter, hydraulic return, cartridge type
- Filter, canister type, engine oil
- Filter, canister type, fuel and water separator
- Radiator/hydraulic oil
- Cooler (side-by-side)
- Spring applied, hydraulically released, parking brakes
- Hydrostatic transmission
- Lockable fuel cap
- Hydraulic demand cooling fan
- Auto engine idle
- Torsion Suspension (4 independent torsion axles)
- Two speed travel
- Integrated tie downs on track frame (4)
- Machine tie down points (9)
- Removable panels for machine frame cleanout
- Support, lift arm
- Steel rear and front bumpers, welded
- Fuel fill, machine right hand side
- Auxiliary Hydraulics, Continuous Flow
- Telematics, Product Link, Cellular
- Steel engine door with replaceable louvers
- Engine door – lockable
- Work tool attachment coupler
- Cat ToughGuardTM hose
Optional Equipment
- External Counterweights
- Beacon, LED
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- 4-point machine lifting eyes
- Paint, Custom
- Speed Sensitive Ride Control
- Bluetooth Key Security
- Attachment Hose Guide
- Corrosion Inhibitor Coating