907 Compact Wheel Loader
Cat® 906, 907, 908 Next Generation Compact Wheel Loaders at Work
Cat® 906, 907, 908 Next Generation Compact Wheel Loaders | Features and Benefits
Construction | Cat® 906 Next Generation Compact Wheel Loader
Industrial Waste | Cat® 908 High Lift Next Generation Compact Wheel Loader
Landscaping Yard | Cat® 908 Next Generation Compact Wheel Loader
Cat® 906 Next Generation Compact Wheel Loader Removing Snow
New Cab Features | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Performance Improvements | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Operator Comfort and Controls | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Machine Security | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Powertrain Mode | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Cat® 906, 907, 908 Next Generation Daily Maintenance and Inspection
Cab Evolution | Next Generation Cat® Compact Wheel Loaders
Contact Us For Price
SPECS SUMMARY
| Maximum Gross Power | 74.7 hp (55.7 kW) |
| Operating Weight | 12765 lb (5792 kg) |
| Bucket Capacities | 0.75-1.55 m³ (1.0-2.0 yd³) |
| Recyclability | 93% |
Specifications
| Maximum Gross Power | 74.7 hp (55.7 kW) |
| Operating Weight | 12765 lb (5792 kg) |
| Bucket Capacities | 0.75-1.55 m³ (1.0-2.0 yd³) |
| Recyclability | 93% |
| Engine Model | Cat C2.8* |
| Bucket Capacities - General Purpose | 0.80-1.35 m³ (1.0-1.7 yd³) |
| Fuel Tank | 24 Gal (90 l) |
| Front | Fixed (standard), Locking Differential (optional) |
| Steering Articulation Angle - Each Direction | 39 ° (39 °) |
| Forward and Reverse - Speed Range Creep# | 6 mile/h (10 km/h) |
| Tire Size - Standard | *405/70 R18 SPT9 |
| ROPS | ISO 3471:2008 |
| Main Relief - 1st Auxiliary (3rd slice) | 3408 psi (23500 kPa) |
| Height: Ground to Cab** | 8.5 ft (2592 mm) |
| Height - Ground to Cab | 8.5 ft (2591 mm) |
| Maximum Engine Speed | 2550 rpm |
| Bucket Capacities - Light Material | 1.25-1.55 m³ (1.6-2.0 yd³) |
| Cooling System | 3.2 Gal (12 l) |
| Rear | Fixed (standard), Locking Differential (optional) |
| Maximum Flow - Steering Pump | 12.3 gpm (46.7 L/min) |
| Forward and Reverse - Speed Range 1* | 6 mile/h (10 km/h) |
| Tire Size - Optional | 405/70 R18 Powerloads |
| FOPS | ISO 3449:2005 Level II |
| Main Relief - 1st Auxiliary (3rd slice) - Standard Flow* | 21 gpm (80 L/min) |
| Height: Ground to Beacon** | 9.08 ft (2774 mm) |
| Height: Ground to Beacon** | 9.08 ft (2774 mm) |
| Maximum Gross Power - Rated Engine Speed | 2400 r/min (2400 r/min) |
| Multi-Purpose | 0.75-1.1 m³ (1.0-1.4 yd³) |
| Engine Crankcase | 2.3 Gal (8.8 l) |
| Note | Oscillation of ±11 degrees via hitch between front and rear frames. |
| Maximum Working Pressure - Steering Pump | 3336 psi (23000 kPa) |
| Forward and Reverse - Speed Range 2** - High Speed | 10.5 mile/h (17 km/h) |
| Tire Size - Optional (1) | 340/80 R18 XMCL/Bibload |
| Note (1) | Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU. |
| Main Relief - 1st Auxiliary (3rd slice) - High Flow* | 32 gpm (120 L/min) |
| Height: Ground Axle Center** | 1.58 ft (480 mm) |
| Height: Ground Axle Center** | 1.58 ft (480 mm) |
| Maximum Gross Power - SAE J1995 | 74.7 hp (55.7 kW) |
| Note | Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration. |
| Axles - Front Center Differential | 2.3 Gal (8.8 l) |
| Steering Cycle Times – (full left to full right) – at High Idle | 2.8 s (2.8 s) |
| Forward and Reverse - Speed Range 2** - Standard | 12 mile/h (20 km/h) |
| Tire Size - Optional (2) | 340/80 R18 TRI 2 |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A). |
| Main Relief - 2nd Auxiliary (4th slice) | 3408 psi (23500 kPa) |
| Height: Ground Clearance** | 1 ft (300 mm) |
| Height - Ground Clearance | 1 ft (300 mm) |
| Maximum Gross Power - ISO 14396 | 74.3 hp (55.4 kW) |
| Note (1) | Bucket capacities stated include BOCE, in line with ISO 7546. |
| Axles - Rear Center Differential | 2.3 Gal (8.8 l) |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.25 turns or 4.00 turns |
| Forward and Reverse - Speed Range 3*** | 25 mile/h (40 km/h) |
| Tire Size - Optional (3) | 40X14-20 TL, SM/TR |
| Note (3) | *Measurements were conducted with the cab doors and windows closed. |
| Main Relief - 2nd Auxiliary (4th slice) - Flow | 12 gpm (45 L/min) |
| Length: Overall* | 17.58 ft (5366 mm) |
| Length - Overall with Bucket | 18.17 ft (5525 mm) |
| Maximum Gross Power - ISO 14396 (metric) | 75.3 mhp (75.3 mhp) |
| Hydraulic System - Including Tank | 17.8 Gal (67.5 l) |
| Note | #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph). |
| Tire Size - Optional 4 | 340/80 R18 Duraforce |
| Note (4) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available. |
| Hydraulic Cycle Time - Rackback | 2.2 s (2.2 s) |
| Length: Rear Axle to Bumper | 4.58 ft (1391 mm) |
| Length: Rear Axle to Bumper | 4.58 ft (1391 mm) |
| Rated Net Power - Rated Engine Speed | 2400 r/min (2400 r/min) |
| Hydraulic Tank | 11.8 Gal (44.6 l) |
| Note (1) | *Creep function not available in this gear or above. |
| Note | *This tire has been used for all dimension, stability and performance data. |
| Hydraulic Cycle Time - Lift | 5 s (5 s) |
| Length: Hitch to Front Axle | 3.58 ft (1085 mm) |
| Length: Hitch to Front Axle | 3.58 ft (1085 mm) |
| Rated Net Power - SAE J1349 | 72.7 hp (54.2 kW) |
| Transmission | 0.6 Gal (2.4 l) |
| Note (2) | **Max speed dependent on model and configuration (standard vs. high speed transmission). |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Hydraulic Cycle Time - Dump | 1.6 s (1.6 s) |
| Length: Wheel Base | 7.08 ft (2170 mm) |
| Length - Wheel Base | 7.08 ft (2170 mm) |
| Rated Net Power - ISO 9249 | 72.1 hp (53.8 kW) |
| Note | No Diesel Exhaust Fluid (DEF) fluid needed on this size engine. |
| Note (3) | ***Reverse is 30 km/h (19 mph). |
| Note (2) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Hydraulic Cycle Time - Float Down | 2.8 s (2.8 s) |
| Length: Front Axle to Front of Coupler | 3.5 ft (1065 mm) |
| Length: Front Axle to Front of Coupler | 4.33 ft (1316 mm) |
| Rated Net Power - 2,400 rpm - ISO 9249 (metric) | 73.1 mhp (73.1 mhp) |
| Note | * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display. |
| Clearance: Bucket at 45° * | 8.25 ft (2505 mm) |
| Clearance - Bucket at 45° | 7.83 ft (2392 mm) |
| Clearance: Load over Height** | 9.5 ft (2902 mm) |
| Clearance: Load over Height** | 9.5 ft (2902 mm) |
| Clearance: Level Bucket** | 9.92 ft (3037 mm) |
| Clearance - Level Bucket | 9.92 ft (3028 mm) |
| Height: Bucket Pin** | 10.67 ft (3251 mm) |
| Height - Bucket Pin | 10.67 ft (3251 mm) |
| Height: Overall** | 13.5 ft (4122 mm) |
| Height: Overall** | 13.83 ft (4212 mm) |
| Maximum Gross Torque - SAE J1995 | 222 lb/ft (300 N·m) |
| Reach: Bucket at 45° * | 2.33 ft (714 mm) |
| Reach - Bucket at 45° | 2.67 ft (813 mm) |
| Maximum Gross Torque - ISO 14396 | 221 lb/ft (300 N·m) |
| Carry Height: Bucket Pin | 1.08 ft (324 mm) |
| Carry Height: Bucket Pin | 1.17 ft (346 mm) |
| Maximum Net Torque - SAE J1349 | 218 lb/ft (296 N·m) |
| Dig Depth** | 0.33 in (113 mm) |
| Dig Depth | 3 in (85 mm) |
| Maximum Net Torque - ISO 9249 | 217 lb/ft (295 N·m) |
| Width: Bucket | 6.75 ft (2045 mm) |
| Width - Bucket | 6.75 ft (2045 mm) |
| Displacement | 171 in³ (2.8 l) |
| Width: Tread Center | 4.67 ft (1420 mm) |
| Width - Tread Center | 4.67 ft (1420 mm) |
| Bore | 3.54 in (90 mm) |
| Turning Radius: Over Bucket | 14.75 ft (4489 mm) |
| Turning Radius - Over Bucket | 15 ft (4563 mm) |
| Stroke | 4.33 in (110 mm) |
| Width: Over Tires | 6.07 ft (1848 mm) |
| Width - Over Tires | 6.08 ft (1848 mm) |
| Note | *Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Turning Radius: Outside of Tires | 12.92 ft (3925 mm) |
| Turning Radius: Outside of Tires | 12.92 ft (3925 mm) |
| Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Turning Radius: Inside of Tires | 6.75 ft (2057 mm) |
| Turning Radius - Inside Tire | 6.75 ft (2057 mm) |
| Note (2) | Net power advertised is the power available at the flywheel. |
| Rack Angle at Full Lift | 56° |
| Rack Angle at Full Lift | 51° |
| Note (3) | #Maximum gross and net torque measured at 1,600 rpm. |
| Dump Angle at Full Lift | 45° |
| Dump Angle at Full Lift | 50° |
| Rack Angle at Carry | 51° |
| Rack Angle at Carry | 46° |
| Departure Angle - Degrees | 30° |
| Departure Angle - Degrees | 30° |
| Articulation Angle - Degrees | 39° |
| Articulation Angle - Degrees | 39° |
| Operating Weight: Bucket ^ | 12689 lb (5756 kg) |
| Operating Weight: Bucket ^ | 12897 lb (5842 kg) |
| Tipping Load - Straight - ISO 14397-1 † | 9773 lb (4433 kg) |
| Tipping Load – Straight – ISO 14397-1 † | 8653 lb (3925 kg) |
| Tipping Load - Full Turn - ISO 14397-1 † | 8235 lb (3735 kg) |
| Tipping Load – Full Turn – ISO 14397-1 † | 7257 lb (3292 kg) |
| Operating Weight: Carriage and Tines ^^ | 12220 lb (5543 kg) |
| Operating Weight: Carriage and Tines ^^ | 12414 lb (5631 kg) |
| Tipping Load - Straight † | 7807 lb (3541 kg) |
| Tipping Load - Straight † | 7416 lb (3364 kg) |
| Tipping Load - Full Turn † | 6569 lb (2980 kg) |
| Tipping Load - Full Turn † | 6266 lb (2842 kg) |
| 80% of Tip: Firm and Level EN474-3 †† | 5255 lb (2384 kg) |
| 80% of Tip: Firm and Level EN474-3 †† | 5013 lb (2274 kg) |
| Note (1) | *Vary with bucket |
| Note (1) | *Vary with bucket |
| Note (2) | **Vary with tire |
| Note (2) | **Vary with tire |
| Note (3) | ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket. |
| Note (3) | ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket. |
| Note (4) | ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center). |
| Note (4) | ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center). |
| Note (5) | †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing. |
| Note (5) | †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing. |
| Note (6) | ††Full compliance to EN474-3 and SAE J1197. |
| Note (6) | ††Full compliance to EN474-3 and SAE J1197. |
| Note (7) | #HPL-A weight, tipping and rated loads are within 1% of the HPL-V. |
| Note (7) | #HPL-A weight, tipping and rated loads are within 1% of the HPL-V. |
| Note (8) | Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%). |
| Note (8) | Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II fork carriage and tines, (tire supplier variability can impact dimensions by 2%). |
| Note (9) | Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9. |
| Note (9) | Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9. |
Benefits and Features
Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. This engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand.
- All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
- Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.
- Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
- “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.
- All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.
- Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
- Machine security is enhanced with a standard keycode or optional Bluetooth® technology.
- Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
- The 907 is availble with the following specific handler arrangements: Ag Handler and Waste Handler
- Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
- Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
- Integrated Technology available to reduce service costs and maintenance.
- The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
- Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
- Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
- Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
- Efficient HVAC regulates temperature control. No need to leave the machine running to cool the cab.
- Shift on the go transmission, means no need to stop so you keep your momentum.
Standard Equipment
- Product Link™
- Service (Electronic Technician™)
- Lights, roading, front halogen
- Lights, rear stop and turn, LED
- Cab mounted fuse panel
- Battery disconnect switch
- Battery, heavy duty, 12V, 90Ah and 1,000 CCA
- Alternator, 100 amp sealed
- Motor, single drive with dedicated implement and steering pumps
- Multi-function lift and tilt with loader arm float
- Joystick, single lever, single auxiliary roller
- Implement valve, pressure compensated
- Hystat displacement pump, infinitely variable
- Caterpillar HYDO™ Advanced 10 hydraulic oil
- Coupler/pin on attachment ready
- Demand cooling fan, hydraulically driven
- Dead engine lower, lift valve, manual
- Electro-hydraulic, fully proportional controls
- Hydraulic pilot shut off switch, in cab
- Cab
–Doors (2), fixed glass
–Wipers, front and rear, full front coverage
–Windshield, front single piece
–Window, rear heated
–Radio ready, speakers and wiring
–Air vents, (4) screen, (7) directional
–Heating, mechanical control unit
–Sun visor, solid, front full width
–Interior light (incandescent) - Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
- Joystick, seat mounted, standard multifunction
–FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
–Arm rest, padded right, multiple position vertical height - Display, analog and digital
–Gauges (2), hydraulic oil, engine coolant
–Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages) - ROPS/FOPS certified canopy/cab
–12V power outlets, interior/exterior
–Pedals, raised, foot, brake/inching, accelerator
–Lever, parking brake
–Cup holders (2)
–CB radio clip, phone holder
–Door release, internal (left and right)
–Hook, large, coat and hard hat
–Floormat, heavy duty, easy clean
–Mirrors, (2) external breakaway, (1) internal
–Operator station on isolation mounts
–Steering wheel, spinner knob, horn in center
–Seat belt, orange, retractable, 51 mm (2 in)
–Storage, personal (trays [3], seat pocket)
–Steering column, tilt adjusted
–Column mounted multi function control: lights, roading, wipers, self canceling turn signals
–Quick coupler switch, in cab
- Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil
- Recovery hitch with pin
- Paint, Electro-Coat primer, gloss topcoat
- Machine lifting/tie down points
- Lockable, fuel cap, HVAC filters, nose cone
- Lockable main and side engine enclosures
- Loader arm safety brace
- Ground level easy access daily service points
- Fenders, front and rear
- Fuel pump, priming (manual)/water separator/drain
- Engine oil, ECO drain tap and hose
- Engine, auto idle shutdown, hibernation mode
- Drive shaft, sealed for life, universal joints
- Coolant, extended life, –36° C (–33° F)
- Closed circuit breather
- Axles, heavy duty, frame mounted with outboard planetary reduction
- Air cleaner, two stage filter, with in cab audio/visual indicator on display
- Cat C2.8 engine
–Diesel particulate filter (Fit for Life)
–Fuel, diesel, ultra low or low Sulphur
–Hydrostatic transmission, two speed, with inching function, “shift on the go”
–Power train mode, hystat - U.S. EPA Tier 4 Final and EU Stage V emissions compliant
Optional Equipment
- Work tool wiring harness, (3) in cab switches
- Push to start
- Lighting packages, multiple; front, rear, engine bay (LED or HAL)
- Quick disconnect auxiliary hydraulics
- Reversing fan
- Ride Control or load check valves
- Connect under pressure and case drain
- Caterpillar Bio HYDO Advanced hydraulic oil
- Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
- USB ports (2), interior
- Sun visor, rear perforated
- Storage, lockable box or lockable cooled box
- Soft touch keypad options, 8 or 16 button
- Secondary display, front or rear view camera
- Seat packages; deluxe or premium
- Seat belt options, multiple
- Radio, FM or digital audio broadcast
- Phone holder, spring loaded
- Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
- Joystick, FNR, twin auxiliary roller, differential lock, horn
- Interior light, door activated
- Doors, sliding windows (left and right)
- Air Conditioning, automatic temperature control (ATC)
- Rotary sensors (snubbing, kickouts, parallel)
- Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
- Power train mode, utility (includes keypad)
- 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
- Fuel pump, priming, manual
- Creep and throttle lock function
- Cold start – jacket water heater, bypass valve
- Antifreeze, extended life coolant, –50° C (–58° F)