Construction | Cat® 906 Next Generation Compact Wheel Loader Construction | Cat® 906 Next Generation Compact Wheel Loader
Industrial Waste | Cat® 908 High Lift Next Generation Compact Wheel Loader Industrial Waste | Cat® 908 High Lift Next Generation Compact Wheel Loader
Landscaping Yard | Cat® 908 Next Generation Compact Wheel Loader Landscaping Yard | Cat® 908 Next Generation Compact Wheel Loader
Cat® 906 Next Generation Compact Wheel Loader Removing Snow Cat® 906 Next Generation Compact Wheel Loader Removing Snow
New Cab Features | 906-907-908 Next Generation Cat® Compact Wheel Loaders New Cab Features | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Performance Improvements | 906-907-908 Next Generation Cat® Compact Wheel Loaders Performance Improvements | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Operator Comfort and Controls | 906-907-908 Next Generation Cat® Compact Wheel Loaders Operator Comfort and Controls | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Machine Security | 906-907-908 Next Generation Cat® Compact Wheel Loaders Machine Security | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Powertrain Mode | 906-907-908 Next Generation Cat® Compact Wheel Loaders Powertrain Mode | 906-907-908 Next Generation Cat® Compact Wheel Loaders
Cat® 906, 907, 908 Next Generation Daily Maintenance and Inspection Cat® 906, 907, 908 Next Generation Daily Maintenance and Inspection
Request Info

SPECS SUMMARY

Maximum Gross Power74.7 HP (55.7 kW)
Operating Weight14617 lb (6632 kg)
Bucket Capacities0.75-1.55 m³ (1.0-2.0 yd³)
Main Relief - 1st Auxiliary (3rd slice)3408 psi (23500 kPa)
Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Specifications

Maximum Gross Power74.7 HP (55.7 kW)
Operating Weight14617 lb (6632 kg)
Bucket Capacities0.75-1.55 m³ (1.0-2.0 yd³)
Main Relief - 1st Auxiliary (3rd slice)3408 psi (23500 kPa)
Bucket Capacities - General Purpose0.80-1.35 m³ (1.0-1.7 yd³)
FrontFixed Locking Differential (standard)
Steering Articulation Angle - Each Direction39 ° (39 °)
Forward and Reverse - Speed Range Creep#6 mile/h (10 km/h)
Tire Size - Standard*405/70 R20 SPT9
Fuel Tank24 Gal (90 l)
ROPSISO 3471:2008
Height - Ground to Cab8.75 ft (2670 mm)
Height: Ground to Cab**8.75 ft (2670 mm)
Engine ModelCat C2.8*
Height: Ground to Cab**8.75 ft (2670 mm)
Height: Ground to Cab**8.75 ft (2670 mm)
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow24 gal/min (90 l/min)
FOPSISO 3449:2005 Level II
Tire Size - Optional405/70 R20 Powerloads
Height: Ground to Beacon**9.33 ft (2853 mm)
Forward and Reverse - Speed Range 1*6 mile/h (10 km/h)
Maximum Flow - Steering Pump12.3 gal/min (46.7 l/min)
RearFixed Locking Differential (standard)
Height: Ground to Beacon**9.33 ft (2853 mm)
Height: Ground to Beacon**9.33 ft (2853 mm)
Cooling System3.2 Gal (12 l)
Height: Ground to Beacon**9.33 ft (2853 mm)
Bucket Capacities - Light Material1.25-1.55 m³ (1.6-2.0 yd³)
Maximum Engine Speed2550 rpm
Main Relief - 1st Auxiliary (3rd slice) - High Flow33 gal/min (125 l/min)
NoteOscillation of ±11 degrees via hitch between front and rear frames.
Note (1)Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Height: Ground Axle Center**1.67 ft (519 mm)
Tire Size - Optional (1)400/70 R20 XMCL/Bibload
Height: Ground Axle Center**1.67 ft (519 mm)
Maximum Gross Power - Rated Engine Speed2400 r/min (2400 r/min)
Maximum Working Pressure - Steering Pump3336 psi (23000 kPa)
Height: Ground Axle Center**1.67 ft (519 mm)
Forward and Reverse - Speed Range 2** - High Speed11 mile/h (18 km/h)
Multi-Purpose0.75-1.1 m³ (1.0-1.4 yd³)
Height: Ground Axle Center**1.67 ft (519 mm)
Engine Crankcase2.3 Gal (8.8 l)
NoteAll capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Height: Ground Clearance**1 ft (320 mm)
Height: Ground Clearance**1 ft (320 mm)
Height - Ground Clearance1 ft (320 mm)
Forward and Reverse - Speed Range 2** - Standard12 mile/h (19 km/h)
Main Relief - 2nd Auxiliary (4th slice)3408 psi (23500 kPa)
Tire Size - Optional (2)360/80 R20 TRI 2
Height: Ground Clearance**1 ft (320 mm)
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).
Steering Cycle Times – (full left to full right) – at High Idle3 s (3 s)
Maximum Gross Power - SAE J199574.7 HP (55.7 kW)
Axles - Front Center Differential2.3 Gal (8.8 l)
Main Relief - 2nd Auxiliary (4th slice) - Flow12 gal/min (45 l/min)
Note (3)*Measurements were conducted with the cab doors and windows closed.
Length: Overall*18.17 ft (5549 mm)
Tire Size - Optional (3)40X14-20 TL, SM/TR
Maximum Gross Power - ISO 1439674.3 HP (55.4 kW)
Note (1)Bucket capacities stated include BOCE, in line with ISO 7546.
Length - Overall with Bucket18.67 ft (5707 mm)
Forward and Reverse - Speed Range 3***25 mile/h (40 km/h)
Length: Overall*20.67 ft (6319 mm)
Length: Overall*20.17 ft (6163 mm)
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.25 turns or 4.00 turns
Axles - Rear Center Differential2.3 Gal (8.8 l)
Length: Rear Axle to Bumper4.5 ft (1391 mm)
Length: Rear Axle to Bumper4.5 ft (1391 mm)
Hydraulic Cycle Time - Rackback2.5 s (2.5 s)
Maximum Gross Power - ISO 14396 (metric)75.3 mhp (75.3 mhp)
Length: Rear Axle to Bumper4.5 ft (1391 mm)
Note#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Length: Rear Axle to Bumper4.5 ft (1391 mm)
Hydraulic System - Including Tank18.6 Gal (70.5 l)
Note (4)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.
Rated Net Power - Rated Engine Speed2400 r/min (2400 r/min)
Length: Hitch to Front Axle3.5 ft (1085 mm)
Note*This tire has been used for all dimension, stability and performance data.
Note (1)*Creep function not available in this gear or above.
Hydraulic Tank11.8 Gal (44.6 l)
Length: Hitch to Front Axle3.5 ft (1085 mm)
Length: Hitch to Front Axle3.5 ft (1085 mm)
Hydraulic Cycle Time - Lift5.8 s (5.8 s)
Length: Hitch to Front Axle3.5 ft (1085 mm)
Transmission0.6 Gal (2.4 l)
Note (2)**Max speed dependent on model and configuration (standard vs. high speed transmission).
Length - Wheel Base7.08 ft (2170 mm)
Hydraulic Cycle Time - Dump1.8 s (1.8 s)
Length: Wheel Base7.08 ft (2170 mm)
Length: Wheel Base7.08 ft (2170 mm)
Note (1)Other tire choices are available. Contact your Cat dealer for details.
Rated Net Power - SAE J134972.7 HP (54.2 kW)
Length: Wheel Base7.08 ft (2170 mm)
Clearance: Bucket at 45° *8.5 ft (2615 mm)
NoteNo Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Clearance: Bucket at 45° *10.75 ft (3294 mm)
Clearance - Bucket at 45°8.17 ft (2502 mm)
Clearance: Bucket at 45° *10.25 ft (3131 mm)
Note (3)***Reverse is 30 km/h (19 mph).
Note (2)In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Rated Net Power - ISO 924972.1 HP (53.8 kW)
Hydraulic Cycle Time - Float Down3.6 s (3.6 s)
Clearance: Load over Height**9.67 ft (2957 mm)
Clearance: Load over Height**14.08 ft (4238 mm)
Rated Net Power - 2,400 rpm - ISO 9249 (metric)73.1 mhp (73.1 mhp)
Clearance: Load over Height**14.08 ft (4238 mm)
Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note*Adjustable from 20% to 100% of maximum flow through display.
Clearance: Load over Height**9.67 ft (2957 mm)
Clearance: Level Bucket**12 ft (3682 mm)
Clearance: Level Bucket**12 ft (3675 mm)
Clearance: Level Bucket**10.42 ft (3197 mm)
Clearance - Level Bucket10.42 ft (3189 mm)
Height: Bucket Pin**11.08 ft (3404 mm)
Height - Bucket Pin11.08 ft (3404 mm)
Height: Bucket Pin**12.75 ft (3889 mm)
Height: Bucket Pin**12.75 ft (3889 mm)
Height: Overall**14.42 ft (4395 mm)
Height: Overall**14.08 ft (4304 mm)
Height: Overall**16 ft (4880 mm)
Height: Overall**15.67 ft (4789 mm)
Reach - Bucket at 45°2.83 ft (872 mm)
Reach: Bucket at 45° *2.5 ft (770 mm)
Reach: Bucket at 45° *3.58 ft (1098 mm)
Reach: Bucket at 45° *3.42 ft (1042 mm)
Carry Height: Bucket Pin1.67 ft (529 mm)
Carry Height: Bucket Pin1.67 ft (508 mm)
Carry Height: Bucket Pin1.17 ft (374 mm)
Carry Height: Bucket Pin1.08 ft (353 mm)
Maximum Gross Torque - SAE J1995222 lb/ft (300 N·m)
Dig Depth**0.42 ft (109 mm)
Dig Depth0.45 ft (117 mm)
Maximum Gross Torque - ISO 14396221 lb/ft (300 N·m)
Dig Depth**0.25 ft (80 mm)
Dig Depth**0.25 ft (72 mm)
Width: Bucket6.75 ft (2080 mm)
Width - Bucket6.75 ft (2080 mm)
Maximum Net Torque - SAE J1349218 lb/ft (296 N·m)
Width: Bucket6.75 ft (2080 mm)
Width: Bucket6.75 ft (2080 mm)
Width: Tread Center5.08 ft (1570 mm)
Width - Tread Center5.08 ft (1570 mm)
Maximum Net Torque - ISO 9249217 lb/ft (295 N·m)
Width: Tread Center5.08 ft (1570 mm)
Width: Tread Center5.08 ft (1570 mm)
Displacement171 in³ (2.8 l)
Turning Radius: Over Bucket14.92 ft (4570 mm)
Turning Radius - Over Bucket15.08 ft (4613 mm)
Turning Radius: Over Bucket15.92 ft (4869 mm)
Turning Radius: Over Bucket16.08 ft (4912 mm)
Width: Over Tires6.5 ft (1990 mm)
Width - Over Tires6.5 ft (1990 mm)
Bore3.54 in (90 mm)
Width: Over Tires6.5 ft (1990 mm)
Width: Over Tires6.5 ft (1990 mm)
Turning Radius: Outside of Tires13.33 ft (4087 mm)
Turning Radius: Outside of Tires13.33 ft (4087 mm)
Stroke4.33 in (110 mm)
Turning Radius: Outside of Tires13.33 ft (4087 mm)
Turning Radius: Outside of Tires13.33 ft (4087 mm)
Turning Radius: Inside of Tires6.67 ft (2033 mm)
Turning Radius: Inside of Tires6.67 ft (2033 mm)
Note*Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Turning Radius - Inside Tire6.67 ft (2033 mm)
Turning Radius: Inside of Tires6.67 ft (2033 mm)
Note (1)Maximum gross and net torque measured at 1,600 rpm.
Rack Angle at Full Lift49°
Rack Angle at Full Lift53°
Rack Angle at Full Lift66°
Rack Angle at Full Lift70°
Dump Angle at Full Lift40°
Note (2)Net power ratings are tested at the reference conditions for the specified standard.
Dump Angle at Full Lift45°
Dump Angle at Full Lift45°
Dump Angle at Full Lift33°
Note (3)Net power advertised is the power available at the flywheel.
Rack Angle at Carry41°
Rack Angle at Carry47°
Rack Angle at Carry53°
Rack Angle at Carry51°
Departure Angle - Degrees30°
Departure Angle - Degrees30°
Departure Angle - Degrees30°
Departure Angle - Degrees30°
Articulation Angle - Degrees39°
Articulation Angle - Degrees39°
Articulation Angle - Degrees39°
Articulation Angle - Degrees39°
Operating Weight: Bucket ^14806 lb (6718 kg)
Operating Weight: Bucket ^15124 lb (6862 kg)
Operating Weight: Bucket ^14902 lb (6762 kg)
Operating Weight: Bucket ^14617 lb (6632 kg)
Tipping Load - Straight - ISO 14397-1 †9064 lb (4113 kg)
Tipping Load – Straight – ISO 14397-1 †9581 lb (4347 kg)
Tipping Load - Straight - ISO 14397-1 †10604 lb (4812 kg)
Tipping Load - Straight - ISO 14397-1 †8262 lb (3749 kg)
Tipping Load - Full Turn - ISO 14397-1 †7595 lb (3446 kg)
Tipping Load – Full Turn – ISO 14397-1 †7985 lb (3623 kg)
Tipping Load - Full Turn - ISO 14397-1 †6888 lb (3126 kg)
Tipping Load - Full Turn - ISO 14397-1 †8947 lb (4060 kg)
Operating Weight: Carriage and Tines ^^14391 lb (6530 kg)
Operating Weight: Carriage and Tines ^^15062 lb (6834 kg)
Operating Weight: Carriage and Tines ^^14252 lb (6467 kg)
Operating Weight: Carriage and Tines ^^14923 lb (6771 kg)
Tipping Load - Straight †7039 lb (3194 kg)
Tipping Load - Straight †6442 lb (2923 kg)
Tipping Load - Straight †8639 lb (3920 kg)
Tipping Load - Straight †8043 lb (3649 kg)
80% of Tip: Firm and Level EN474-3 ††5438 lb (2468 kg)
80% of Tip: Firm and Level EN474-3 ††5813 lb (2638 kg)
80% of Tip: Firm and Level EN474-3 ††4368 lb (1982 kg)
80% of Tip: Firm and Level EN474-3 ††4743 lb (2152 kg)
Note (1)*Vary with bucket
Note (1)*Vary with bucket
Note (1)*Vary with bucket
Note (1)*Vary with bucket
Note (2)**Vary with tire
Note (2)**Vary with tire
Note (2)**Vary with tire
Note (2)**Vary with tire
Note (3)^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (3)^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (3)^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (3)^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.
Note (4)^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (4)^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (4)^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (4)^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (5)†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (5)†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (5)†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)††Full compliance to EN474-3 and SAE J1197.
Note (6)††Full compliance to EN474-3 and SAE J1197.
Note (6)††Full compliance to EN474-3 and SAE J1197.
Note (6)††Full compliance to EN474-3 and SAE J1197.
Note (7)#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (7)#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (7)#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (7)#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (8)Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (8)Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).
Note (8)Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).

Benefits and Features

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines emit equivalent to EU Stage IIIA (U.S. EPA Tier 3) or meets EU Stage V (U.S. EPA Tier 4 Final) with a clean emission module designed to manage itself so you can concentrate on the task at hand.

  • All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
  • Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

  • Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
  • “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

  • All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

  • Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
  • Machine security is enhanced with a standard keycode or optional Bluetooth® technology.

  • Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
  • The 908 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

  • Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
  • Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
  • Integrated Technology available to reduce service costs and maintenance.

Standard Equipment

  • Emissions compliant, two options (Dependent on regional regulations.)
    – U.S. EPA Tier 4 Final and EU Stage V
    – U.S. EPA Tier 3 and EU Stage IIIA equivalent
  • Cat C2.8 engine
    – Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
    – Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
    – Hydrostatic transmission, two speed, with inching function, “shift on the go”
    – Power train mode, hystat
  • Air cleaner, two stage filter, with in cab audio/visual indicator on display
  • Axles, heavy duty, frame mounted with outboard planetary reduction
  • Closed circuit breather
  • Coolant, extended life, –36° C (–33° F)
  • Drive shaft, sealed for life, universal joints
  • Engine, auto idle shutdown, hibernation mode
  • Engine oil, ECO drain tap and hose
  • Fuel pump, priming (manual)/water separator/drain
  • Hystat displacement pump, infinitely variable
  • Implement valve, pressure compensated
  • Joystick, single lever, single auxiliary roller
  • Multi-function lift and tilt with loader arm float
  • Motor, single drive with dedicated implement and steering pumps
  • Alternator, 100 amp sealed
  • Battery, heavy duty, 12V, 90Ah and 1,000 CCA
  • Battery disconnect switch
  • Cab mounted fuse panel
  • Lights, rear stop and turn, LED
  • Lights, roading, front halogen
  • Service (Electronic Technician™)
  • Product Link™
  • ROPS/FOPS certified canopy/cab
    – 12V power outlets, interior/exterior
    – Pedals, raised, foot, brake/inching, accelerator
    – Lever, parking brake
    – Cup holders (2)
    – CB radio clip, phone holder
    – Door release, internal (left and right)
    – Hook, large, coat and hard hat
    – Floormat, heavy duty, easy clean
    – Mirrors, (2) external breakaway, (1) internal
    – Operator station on isolation mounts
    – Steering wheel, spinner knob, horn in center
    – Seat belt, orange, retractable, 51 mm (2 in)
    – Storage, personal (trays [3], seat pocket)
    – Steering column, tilt adjusted
    – Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
    – Quick coupler switch, in cab
  • Display, analog and digital
    – Gauges (2), hydraulic oil, engine coolant
    – Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)
  • Joystick, seat mounted, standard multifunction
    – FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
    – Arm rest, padded right, multiple position vertical height
  • Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
  • Cab
    – Doors (2), fixed glass
    – Wipers, front and rear, full front coverage
    – Windshield, front single piece
    – Window, rear heated
    – Radio ready, speakers and wiring
    – Air vents, (4) screen, (7) directional
    – Heating, mechanical control unit
    – Sun visor, solid, front full width
    – Interior light (incandescent)
  • Fenders, front and rear
  • Ground level easy access daily service points
  • Loader arm safety brace
  • Lockable main and side engine enclosures
  • Lockable, fuel cap, HVAC filters, nose cone
  • Machine lifting/tie down points
  • Paint, Electro-Coat primer, gloss topcoat
  • Recovery hitch with pin
  • Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil

Optional Equipment

  • Antifreeze, extended life coolant, –50° C (–58° F)
  • Cold start – jacket water heater, bypass valve
  • Creep and throttle lock function
  • Fuel pump, priming, electric (Dependent on regional regulations.)
  • 40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes
  • Power train mode, utility (includes keypad)
  • Lighting packages, multiple; front, rear, engine bay (LED or HAL)
  • Push to start
  • Work tool wiring harness, (3) in cab switches
  • Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve
  • Caterpillar Bio HYDO Advanced hydraulic oil
  • Connect under pressure and case drain
  • Ride Control or load check valves (Dependent on regional regulations.)
  • Reversing fan
  • Quick disconnect auxiliary hydraulics
  • Air Conditioning, automatic temperature control (ATC)
  • Doors, sliding windows (left and right)
  • Interior light, door activated
  • Joystick, FNR, twin auxiliary roller, differential lock, horn
  • Joystick, seat mounted, multifunction
  • Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror
  • Phone holder, spring loaded
  • Radio, FM or digital audio broadcast
  • Seat belt options, multiple
  • Seat packages; deluxe or premium
  • Secondary display, front or rear view camera
  • Soft touch keypad options, 8 or 16 button
  • Storage, lockable box or lockable cooled box
  • Sun visor, rear perforated
  • USB ports (2), interior
  • Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)
  • Rotary sensors (snubbing, kickouts, parallel)