Cat® 910, 914, 920 Compact Wheel Loaders at Work Cat® 910, 914, 920 Compact Wheel Loaders at Work
Request Info

SPECS SUMMARY

Maximum Gross Power110 HP (82 kW)
Operating Weight18102 lb (8109 kg)
Bucket Capacities1.3-1.9 m3 (1.7-2.5 yd3)
ROPSISO 3471:2008
The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Specifications

Maximum Gross Power110 HP (82 kW)
Operating Weight18102 lb (8109 kg)
Bucket Capacities1.3-1.9 m3 (1.7-2.5 yd3)
ROPSISO 3471:2008
FOPSEN ISO 3449:2008 (ISO 3449:2005)
Cooling System5.7 gal (US) (21.5 l)
Fuel Tank43.6 gal (US) (165 l)
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow24 gal/min (90 l/min)
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level3.7 s (3.7 s)
Maximum Flow - Implement Pump - 4th Function, Maximum Flow24 gal/min (90 l/min)
Hydraulic System - Including Tank25.9 gal (US) (98 l)
Hydraulic Tank14.5 gal (US) (55 l)
Transmission0.8 gal (US) (3.2 l)
NoteDEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential2 gal (US) (7.5 l)
Axles - Rear Center Differential2 gal (US) (7.5 l)
Engine Crankcase2.6 gal (US) (10 l)
Note*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Diesel Exhaust Fluid (DEF) Tank4.8 gal (US) (18 l)
Maximum Flow - Implement Pump32 gal/min (122 l/min)
Forward and Reverse - Speed Range 325 mile/h (40 km/h)
Forward and Reverse - Speed Range 2*12.5 mile/h (20 km/h)
Forward and Reverse - Speed Range 1*6.3 mile/h (10 km/h)
Note (2)In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size15.5 R25 L2 XTLA
Other Choices Include17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)Other tire choices are available. Contact your Cat dealer for details.
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)*The measurements were conducted with the cab doors and windows closed.
FrontFixed; Locking differential (standard)
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure3046 psi (21000 kPa)
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure3046 psi (21000 kPa)
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift5.2 s (5.2 s)
Maximum Net Torque - SAE J1349329 ft·lbf (446 N·m)
Maximum Gross Power - Maximum Engine Speed2350 r/min (2350 r/min)
Maximum Net Torque - ISO 9249327 ft·lbf (443 N·m)
Maximum Gross Power - SAE J1995111 HP (83 kW)
Maximum Gross Torque - SAE J1995335 ft·lbf (454 N·m)
Maximum Gross Torque - ISO 14396332 ft·lbf (450 N·m)
Rated Net Power - ISO 924998 HP (73 kW)
Rated Net Power - ISO 9249 (DIN)99 HP (73 kW)
Stroke4.72 in (120 mm)
Engine ModelCat C3.6
Maximum Gross Power - ISO 14396110 HP (82 kW)
Rated Net Power - Rated Engine Speed2200 r/min (2200 r/min)
NoteNet power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - SAE J134999 HP (74 kW)
Displacement220 in³ (3.6 l)
Bore3.86 in (98 mm)
Maximum Gross Power - ISO 14396 (DIN)111 HP (82 kW)
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
Bucket Capacities - General Purpose1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material2.5-3.5 m³ (3.3-4.6 yd³)
Maximum Working Pressure - Steering Pump2683 psi (18500 kPa)
Steering Articulation Angle - Each Direction40 ° (40 °)
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed3.2 s (3.2 s)
Maximum Flow - Steering Pump17 gal/min (66 l/min)
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.75 turns (3.75 turns)
Hydraulic Cycle Time - Dump, at Maximum Reach1.4 s (1.4 s)
Hydraulic Cycle Time - Total Cycle Time12.5 s (12.5 s)
Maximum Working Pressure - Implement Pump3408 psi (23500 kPa)
Relief Pressure - Tilt Cylinder4931 psi (34000 kPa)
Hydraulic Cycle Time - Rackback2.2 s (2.2 s)
RearOscillating ±11 degrees; Locking differential (Standard)

Benefits and Features

EU Stage V and U.S. EPA Tier 4 Final compliant.

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

The 910 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket Mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and efficient engine power delivers a balanced solution for all customer applications.

Standard Fuel Savings Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 910 both powerful and fuel efficient.