WE’RE OPEN FOR BUSINESS | READ OUR COVID-19 POLICY

The New Cat® Wheel Loaders are Here For You The New Cat® Wheel Loaders are Here For You
Cat® 910, 914, 920 Compact Wheel Loaders at Work Cat® 910, 914, 920 Compact Wheel Loaders at Work
Cat® 910, 914, 920 Compact Wheel Loaders Overview Cat® 910, 914, 920 Compact Wheel Loaders Overview
Cat® 910, 914, 920 Compact Wheel Loaders Features and Benefits Cat® 910, 914, 920 Compact Wheel Loaders Features and Benefits
Cat® 914 and 920 Aggregate Handlers Features and Benefits Cat® 914 and 920 Aggregate Handlers Features and Benefits
Cat® 914 and 920 Waste Handlers Features and Benefits Cat® 914 and 920 Waste Handlers Features and Benefits
Cat® 914 and 920 Waste Handlers Overview Cat® 914 and 920 Waste Handlers Overview
Request Info

SPECS SUMMARY

Maximum Gross Power121 HP (90 kW)
Operating Weight21742 lb (9865 kg)
Bucket Capacities1.3-1.9 m3 (1.7-2.5 yd3)
Maximum Gross Power - Rated Engine Speed2200 r/min (2200 r/min)
The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Specifications

Maximum Gross Power121 HP (90 kW)
Operating Weight21742 lb (9865 kg)
Bucket Capacities1.3-1.9 m3 (1.7-2.5 yd3)
Maximum Gross Power - Rated Engine Speed2200 r/min (2200 r/min)
Rated Net Power - Rated Engine Speed2200 r/min (2200 r/min)
Rated Net Power - SAE J1349120 HP (90 kW)
Maximum Gross Power - ISO 14396 (metric)122 HP (122 HP)
Rated Net Power - ISO 9249118 HP (88 kW)
Maximum Gross Torque - SAE J1995372 ft·lbf (505 N·m)
Maximum Gross Torque - ISO 14396369 ft·lbf (500 N·m)
Maximum Net Torque - SAE J1349366 ft·lbf (496 N·m)
Maximum Net Torque - ISO 9249363 ft·lbf (493 N·m)
Displacement220 in³ (3.6 l)
Bore3.85 in (98 mm)
Stroke4.72 in (120 mm)
Engine ModelCat C3.6
EmissionsEngine meets Tier 4 Final/Stage V emission standards.
NoteNet power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Transmission0.8 gal (US) (3.2 l)
ROPSISO 3471:2008
FOPSEN ISO 3449:2008 (ISO 3449:2005)
NoteDEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Hydraulic Tank14.5 gal (US) (55 l)
Note*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 1*6.3 mile/h (10 km/h)
Forward and Reverse - Speed Range 325 mile/h (40 km/h)
Forward and Reverse - Speed Range 2*12.5 mile/h (20 km/h)
Fuel Tank43.6 gal (US) (165 l)
Note (1)Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
RearOscillating ±11 degrees; Locking differential (standard)
FrontFixed; Locking differential (standard)
Note (3)The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Hydraulic System - Including Tank25.9 gal (US) (98 l)
Note (4)*The measurements were conducted with the cab doors and windows closed.
Other Choices Include17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size17.5 R25 L2 XTLA
Note (1)Other tire choices are available. Contact your Cat dealer for details.
Note (3)Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Axles - Front4.5 gal (US) (17 l)
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift4.8 s (4.8 s)
Cooling System5.7 gal (US) (21.5 l)
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard25 gal/min (95 l/min)
Maximum Gross Power - ISO 14396121 HP (90 kW)
Bucket Capacities - General Purpose1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material2.5-3.5 m³ (3.3-4.6 yd³)
Maximum Working Pressure - Steering Pump3190 psi (22000 kPa)
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed2.3 s (2.3 s)
Steering Articulation Angle - Each Direction40 ° (40 °)
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left3.4 turns (3.4 turns)
Maximum Flow - Steering Pump21.7 gal/min (82 l/min)
Relief Pressure - Tilt Cylinder4641 psi (32000 kPa)
Maximum Flow - Implement Pump43.6 gal/min (165 l/min)
Axles - Rear4.5 gal (US) (17 l)
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure4641 psi (32000 kPa)
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level2.7 s (2.7 s)
NoteAll cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure - Implement Pump4061 psi (28000 kPa)
Hydraulic Cycle Time - Total Cycle Time11.5 s (11.5 s)
Hydraulic Cycle Time - Rackback2.2 s (2.2 s)
Hydraulic Cycle Time - Dump, at Maximum Reach1.8 s (1.8 s)
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High40 gal/min (150 l/min)
Engine Crankcase2.6 gal (US) (10 l)
Diesel Exhaust Fluid (DEF) Tank4.8 gal (US) (18 l)
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow25 gal/min (95 l/min)

Benefits and Features

EU Stage V and U.S. EPA Tier 4 Final compliant.

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. A High Lift option is available to extend both reach and dump clearance for more demanding tasks.

The 920 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT), ISO (wide) or Fusion™ interface coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application. High Flow option allows for the use of even the most demanding work tools.

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket Mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and increased engine power delivers a balanced solution for all customer applications.

Standard Fuel Savings Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 920 both powerful and fuel efficient.