930M Aggregrate Handler Wheel Loader

M Series Small Wheel Loaders | At Work M Series Small Wheel Loaders | At Work
M Series Small Wheel Loaders | Overview M Series Small Wheel Loaders | Overview
Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC
Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader
Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips
Secondary Display Navigation | M Series Small Wheel Loader Operator Tips Secondary Display Navigation | M Series Small Wheel Loader Operator Tips
Preventative Maintenance | M Series Small Wheel Loader Operator Tips Preventative Maintenance | M Series Small Wheel Loader Operator Tips
Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips
Creeper Control | M Series Small Wheel Loader Operator Tips Creeper Control | M Series Small Wheel Loader Operator Tips
Rim Pull | M Series Small Wheel Loader Operator Tips Rim Pull | M Series Small Wheel Loader Operator Tips
Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips
Throttle Lock | M Series Small Wheel Loader Operator Tips Throttle Lock | M Series Small Wheel Loader Operator Tips
Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips
Quick Steer | M Series Small Wheel Loader Operator Tips Quick Steer | M Series Small Wheel Loader Operator Tips
Power Train Modes | M Series Small Wheel Loader Operator Tips Power Train Modes | M Series Small Wheel Loader Operator Tips
Cab Controls and Features | M Series Small Wheel Loader Operator Tips Cab Controls and Features | M Series Small Wheel Loader Operator Tips
Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips
Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips
Reversing Fan | M Series Small Wheel Loader Operator Tips Reversing Fan | M Series Small Wheel Loader Operator Tips
Customize Your Experience | M Series Small Wheel Loader Operator Tips Customize Your Experience | M Series Small Wheel Loader Operator Tips
Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips
Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips
Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips
Differential Lock | M Series Small Wheel Loader Operator Tips Differential Lock | M Series Small Wheel Loader Operator Tips
Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips
Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips
Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips
Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips
Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips
Request Info

SPECS SUMMARY

Maximum Gross Power170 HP (127 kW)
Operating Weight31144 lb (14131 kg)
Bucket Capacities2.5-2.7 m3 (3.3-3.5 yd3)
Bore4 in (105 mm)
The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Specifications

Maximum Gross Power170 HP (127 kW)
Operating Weight31144 lb (14131 kg)
Bucket Capacities2.5-2.7 m3 (3.3-3.5 yd3)
Bore4 in (105 mm)
Stroke5 in (135 mm)
Displacement427 in³ (7.01 l)
ROPSISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Steering Cylinder, Double Acting - Rod Diameter1.6 in (40 mm)
Full Turn Tip Load19563 lb (8876 kg)
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Hydraulic System - Including Tank43.6 gal (US) (165 l)
Note (2)Offset rims available to meet European roading requirements.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)2.7/2.7 seconds
Steering Cylinder, Double Acting - Stroke17.2 in (438 mm)
Brakes - ServiceInboard wet disc
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)572 ft·lbf (776 N·m)
Maximum Rated Gross Power - ISO 14396164 HP (122 kW)
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)162 HP (119 kW)
EmissionsEngine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Cooling System7.9 gal (US) (30 l)
Front AxleFixed
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)566 ft·lbf (768 N·m)
Rear Axle - Traction Aid - OptionalLimited slip differential
Steering Cylinder, Double Acting - Bore Diameter2.8 in (70 mm)
Transmission - Gear Box2.2 gal (US) (8.5 l)
Lift Cylinder, Double Acting - Bore Diameter4.7 in (120 mm)
Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Flow - Implement Pump - 3rd Function*50 gal/min (190 l/min)
Fuel Tank51.5 gal (US) (195 l)
Note (2)The Blue Angel environmental label is an optional attachment for Europe only.
Note (1)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time9.3/10.1 seconds
Note (1)* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)154 HP (115 kW)
Forward and Reverse - Range 425 mile/h (40 km/h)
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.4 s (2.4 s)
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)158 HP (116 kW)
Note (3)* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Maximum Working Pressure - Implement Pump3626 psi (25000 kPa)
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure3626 psi (25000 kPa)
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)572 ft·lbf (776 N·m)
Front Axle - Traction Aid**Locking differential (standard)
Note (1)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Maximum Working Pressure - Steering Pump3500 psi (24130 kPa)
Tilt Cylinder, Double Acting - Bore Diameter5.9 in (150 mm)
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)566 ft·lbf (768 N·m)
Lift Cylinder, Double Acting - Stroke28.7 in (728 mm)
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited2.8 s (2.8 s)
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65± 10.5 degrees
Rear Axles6.6 gal (US) (25 l)
Forward and Reverse - Range 317 mile/h (27 km/h)
Brakes - ParkingSpring applied hydraulically released
Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Lift Cylinder, Double Acting - Rod Diameter2.6 in (65 mm)
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)592 ft·lbf (804 N·m)
Rear AxleOscillating
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)592 ft·lbf (804 N·m)
Maximum Steering Torque - 0° (Straight Machine)37155 ft·lbf (50375 N·m)
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600 r/min (1600 r/min)
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)160 HP (119 kW)
Rated Net Power157 HP (117 kW)
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800 r/min (1800 r/min)
Engine ModelCat® C7.1
Maximum Rated Gross Power - ISO 14396 (DIN)166 HP (122 kW)
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)157 HP (117 kW)
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)166 HP (122 kW)
Note* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)
Tilt Cylinder, Double Acting - Stroke21.9 in (555 mm)
Maximum Flow - Steering Pump34 gal/min (130 l/min)
Tilt Cylinder, Double Acting - Rod Diameter3.5 in (90 mm)
Diesel Exhaust Fluid (DEF) Tank5 gal (US) (19 l)
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)164 HP (122 kW)
Engine Crankcase5.3 gal (US) (20 l)
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)1.5/1.7 seconds
Hydraulic Tank23.8 gal (US) (90 l)
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)5.1/5.7 seconds
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)160 HP (119 kW)
Relief Pressure - Tilt Cylinder4061 psi (28000 kPa)
Maximum Flow - Implement Pump50 gal/min (190 l/min)
Maximum Steering Torque - 40° (Full Turn)27747 ft·lbf (37620 N·m)
Note (2)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (4)Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Declared Sound Levels– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Front Axles6.9 gal (US) (26 l)
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)162 HP (119 kW)
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)156 HP (116 kW)
Forward and Reverse - Range 28 mile/h (13 km/h)
Note (1)* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.

Benefits and Features

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE
  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Standard Equipment

  • Axle seal guards
  • Auto idle shut down feature
  • Cat® C7.1 engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and aftercooled – Filtered crankcase breather – Diesel particulate filter (Fit for Life)
  • Coolant protection to –34° C (–29° F)
  • Differential lock in front axle
  • Dry type air cleaner
  • Enclosed wet disc full hydraulic brakes
  • Fuel priming pump, automatic
  • Fuel water separator
  • Hydraulically driven demand cooling fan
  • Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed
  • Lubed for life driveshafts
  • Parking brake, electric
  • Wide spaced 6 fins per inch cooling package
  • S·O·SSM sampling ports
  • Throttle lock and maximum speed limiter
  • Automatic lift, lower and tilt kickouts
  • Bucket and Fork Modes, adjustable in-cab
  • Cylinder damping at kickout and end stops
  • Fine Mode control in Fork Mode
  • Hydraulic Response setting
  • Load sensing hydraulics and steering
  • Seat-mounted hydraulic joystick controls
  • Alternator, 115-amp, heavy duty
  • 12V power supply in cab (2)
  • Batteries, 1,000 CCA (2) 24 volt system
  • Back-up alarm
  • Emergency shutdown switch
  • Heavy duty gear reduction starter
  • Product Link PRO with subscription
  • Remote jump start post
  • Resettable main and critical function breakers
  • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
  • Automatic temperature control
  • Cab, enclosed and pressurized
  • Cup holders
  • External heated mirrors with lower parabolic
  • Ground level cab door release
  • Gauges: – Digital hour meter, odometer, tachometer, ground speed and direction indicator – Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge
  • Hydraulic control lockout
  • Interior cab lighting, door and dome
  • Interior rearview mirrors (2)
  • Lunch box storage
  • Operator warning system indicators
  • Radio ready speakers
  • Rear window defrost, electric
  • Seat-mounted controls, adjustable
  • Sliding glass on the side windows
  • Column mounted multi function control – lights, wipers, turn signal
  • Suspension seat, fabric
  • Tilt and telescopic steering wheel
  • Wet arm wiper/washer, front and rear
  • Large-access enclosure doors
  • Parallel lift loader linkage
  • Recovery hitch with pin
  • Remote mounted lubrication points
  • Lockable compartments and enclosures

Optional Equipment

  • Automatic blower control
  • Electrically adjustable heated mirrors (2)
  • LED interior lighting
  • Secondary display to adjust settings
  • Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)
  • Power train, (lower, side, driveshaft and crankcase)
  • Windshield and lights
  • Cylinders, tilt and steering
  • Radio ready with Bluetooth
  • Radio, AM/FM with Bluetooth and clock
  • Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
  • Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
  • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
  • Dual mode and Secondary
  • Bias ply, 17.5, 20.5-25
  • Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25