995 Large Wheel Loader

Contact Us For Price
SPECS SUMMARY
Engine Model | Cat® 3516E |
Operating Weight - Standard | 540555 lb (245192 kg) |
Bucket Capacity Range | 17.2-43.6 m3 (22.3-57 yd3) |
B-Pin Height - Maximum Lift | 31.6 ft (9657 mm) |
Specifications
Engine Model | Cat® 3516E |
Operating Weight - Standard | 540555 lb (245192 kg) |
Bucket Capacity Range | 17.2-43.6 m3 (22.3-57 yd3) |
B-Pin Height - Maximum Lift | 31.6 ft (9657 mm) |
B-Pin Height - Maximum Lift | 28.8 ft (8800 mm) |
Steering System - Circuit | Pilot, Load Sensing |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 71 dB(A) (71 dB(A)) |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 72 dB(A) (72 dB(A)) |
Ambient Capability Hydraulically Driven Demand Fan - Standard | 109.4 °F (43 °C) |
Emissions | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent |
Fuel Tank - Standard | 856 gal (US) (3240 l) |
Rack Back | 4.9 s (4.9 s) |
Lift/Tilt System - Circuit | Positive Flow Control |
Transmission Type | Cat Planetary Power Shift |
Front | Fixed |
Operating Weight - High Lift | 544457 lb (246962 kg) |
Forward - 1 | 4.6 mile/h (7.4 km/h) |
Raise | 12.6 s (12.6 s) |
Fuel Tank - With 24 hr Attachment | 1414 gal (US) (5350 l) |
Rear | Trunnion |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | 131 °F (55 °C) |
Lift/Tilt System - Pump | Variable Displacement Piston |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | 60 ton (US) (54.4 t) |
Steering System - Pump | Piston, Variable Displacement |
Clearance at Maximum Lift | 19.8 ft (6039 mm) |
Clearance at Maximum Lift | 22.6 ft (6896 mm) |
Machine Sound Level (ISO 6395:2008) | 117 dB(A) (117 dB(A)) |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | 127.4 °F (53 °C) |
Dump Angle at Maximum Lift | –50.0 degrees |
Oscillation Angle | 9° |
Engine Power - ISO 14396 | 1847 HP (1377 kW) |
Cooling System | 138 gal (US) (520 l) |
Dump | 3.1 s (3.1 s) |
Dump Angle at Maximum Lift | –50.0 degrees |
Maximum Flow at 1,700 rpm Engine Speed | 541 gal/min (2047 l/min) |
Machine Sound Level (ISO 6395:2008) | 119 dB(A) (119 dB(A)) |
Forward - 2 | 8 mile/h (12.9 km/h) |
Rated Payload - Standard Lift (Moderate to High Digging Resistance) | 50 ton (US) (45.3 t) |
Gross Power - SAE J1995 | 1870 HP (1394 kW) |
Engine Crankcase | 76 gal (US) (288 l) |
Front Axle Centerline to Bucket Tip | 24.2 ft (7383 mm) |
Front Axle Centerline to Bucket Tip | 21.9 ft (6688 mm) |
Note | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Note | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Forward - 3 | 13.6 mile/h (21.9 km/h) |
Rated Payload - High Lift (Low to Moderate Digging Resistance) | 55 ton (US) (49.9 t) |
Lower Float Down | 4.2 s (4.2 s) |
Relief Valve Setting - Lift/Tilt | 5004 psi (34500 kPa) |
Rated Payload - High Lift (Moderate to High Digging Resistance) | 50 ton (US) (45.3 t) |
Ground to Bumper Clearance | 4.4 ft (1355 mm) |
Transmission | 110 gal (US) (416 l) |
Ground to Bumper Clearance | 4.4 ft (1355 mm) |
Cylinders, Double Acting - Lift, Bore and Stroke | 370 × 1713 mm (14.6 × 67.4 in) |
Total Steering Angle | 80 degrees |
Net Power - SAE J1349 - Standard Ambient | 1739 HP (1297 kW) |
Total Hydraulic Cycle Time - Empty Bucket | 23.5 s (23.5 s) |
Reverse - 1 | 5 mile/h (8.1 km/h) |
Ground to Center of Axles | 6 ft (1830 mm) |
Ground to Center of Axles | 6 ft (1830 mm) |
Note | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
Steering Cycle Times - Low Idle | 7.6 s (7.6 s) |
Cylinders, Double Acting - Tilt, Bore and Stroke | 310 × 1086 mm (12.2 × 42.8 in) |
Net Power - SAE J1349 - High Ambient | 1696 HP (1265 kW) |
Reverse - 2 | 8.8 mile/h (14.1 km/h) |
Differential - Final Drives - Front | 220 gal (US) (833 l) |
Pilot System | Open Loop and Pressure Reducing |
Ground to Lower Hitch Clearance | 2.9 ft (898 mm) |
Differential - Final Drives - Rear | 200 gal (US) (757 l) |
Steering Cycle Times - High Idle | 4.3 s (4.3 s) |
Ground to Lower Hitch Clearance | 2.9 ft (898 mm) |
Bore | 6.7 in (170 mm) |
Reverse - 3 | 14.9 mile/h (24 km/h) |
Ground to Top of Exhaust Stacks | 23.2 ft (7067 mm) |
Ground to Top of Exhaust Stacks | 23.2 ft (7067 mm) |
Hydraulic Tank - Implement and Hydraulic Fan | 270 gal (US) (1022 l) |
Direct Drive - Forward 1 | Lock-up disables |
Stroke | 8.5 in (215 mm) |
Direct Drive - Forward 2 | 8.7 mile/h (14 km/h) |
Displacement | 4766 in³ (78.1 l) |
Ground to Top of Hood | 18.6 ft (5682 mm) |
Hydraulic Tank - Steering and Braking | 100 gal (US) (379 l) |
Ground to Top of Hood | 18.6 ft (5682 mm) |
Ground to Top of ROPS | 23.4 ft (7119 mm) |
Oil Renewal System (ORS)* | 20 gal (US) (75.7 l) |
Peak Torque - 1,200 rpm - SAE J1995 | 8549 lb/ft (11591 N·m) |
Direct Drive - Forward 3 | 15.2 mile/h (24.5 km/h) |
Ground to Top of ROPS | 23.4 ft (7119 mm) |
Torque Rise | 39% |
Maximum Overall Height - Bucket Raised | 39.3 ft (11966 mm) |
Direct Drive - Reverse 1 | Lock-up disables |
Maximum Overall Height - Bucket Raised | 42.1 ft (12823 mm) |
Note | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
Maximum Overall Length | 66.9 ft (20388 mm) |
Note (1) | The power ratings apply when tested under the reference conditions for the specified standard. |
Maximum Overall Length | 64.6 ft (19693 mm) |
Direct Drive - Reverse 2 | 9.6 mile/h (15.5 km/h) |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
Direct Drive - Reverse 3 | 16.8 mile/h (27 km/h) |
Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
Note | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
Rack Angle at Maximum Lift | 59.5 degrees |
Rack Angle at Maximum Lift | 59.4 degrees |
Note (3) | The gross power advertised is with the fan at maximum speed. |
Note | Travel speeds based on 58/85-57 tires. |
Rack Back Angle - Carry | 47.7 degrees |
Rack Back Angle - Carry | 53.5 degrees |
Rack Back Angle - Ground Level | 39.7 degrees |
Rack Back Angle - Ground Level | 45 degrees |
Reach - Maximum Lift | 9.6 ft (2946 mm) |
Reach - Maximum Lift | 9.4 ft (2884 mm) |
Rear Axle - Centerline to Bumper | 20.4 ft (6205 mm) |
Rear Axle - Centerline to Bumper | 20.4 ft (6205 mm) |
Tread Width | 14.1 ft (4300 mm) |
Tread Width | 14.1 ft (4300 mm) |
Wheel Base | 22.3 ft (6800 mm) |
Wheel Base | 22.3 ft (6800 mm) |
Width - Over Tires - With Bulge | 18.8 ft (5758 mm) |
Width - Over Tires - With Bulge | 18.8 ft (5760 mm) |
Brakes | ISO 3450:2011 |
Benefits and Features
- Designed for visibility, with a taller windshield that provides a 25% increase in glass surface area for a better view to the bucket, standard rear-view camera, optional Detect 270-degree cameras, standard LED lighting and six-mirror system.
- Improved access and egress, with integrated powered access system that can be raised and lowered from cab or ground, 45-degree-angle wide stairs, emergency egress ladder, and full handrails on each side.
- Wide walkways with non-skid surfaces, windshield cleaning platform, and integrated lockout/tagout points designed into the service areas.
- Increased leg room and increased width by the operator’s knees compared to 994K.
- Reduced vibration, low sound levels and automatic temperature controls.
- Electro-hydraulic speed-sensing steering with force feedback for shift-long comfort.
- Pressurized cab featuring Next Gen Seat with 9-inch travel, active cooling and heating, adjustable lumbar support, seat cushion tilt adjustment, and air-adjustable bolsters on the seat and backrest.
- Low-effort integrated controls that make cycles smoother and faster while reducing fatigue.
- Large, easy-to-read, color LED displays that provide access to the Electronic Operation & Maintenance Manual.
- Operator coaching, which helps empower operators to exceed targets by measuring and providing feedback to reinforce proper operating techniques.
- New Autodig Components that boost efficiency and reduce tire wear by automating critical parts of the digging cycle.
- Payload Overload Prevention, which inhibits severe payloads from being raised to full truck height.
- Increased rated payload and 6% increase in hydraulic force compared to 994K.
- Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS), which reduce the potential for wheel slippage without reducing hydraulic efficiency.
- Superior loading with Cat Performance Series Buckets, which are engineered to dig into piles quickly and load efficiently — with fill factors up to 115%.
- 3516E engine, which delivers optimum performance through the use of a 16-cylinder, four-stroke design, plus turbochargers and aftercoolers that deliver on-demand performance.
- Excellent stability thanks to optimized weight distribution, helping operators be more confident and productive.
- Tire Slip Prevention, which reduces rimpull when there is less downforce on the tire and increases rimpull when there is more downforce on the tire — providing maximum rimpull when you can use it.
- Tire Set, which automatically applies a lift command at the optimal time to increase traction on the tire, allowing for an increase in usable rimpull.
- Lift Stall Prevention, which automatically applies the impeller clutch when necessary to prevent hydraulic stall when lifting up through the face — keeping the lift motion continuous, without excessive use of the impeller clutch.
- Positive Flow Control Hydraulic System, which boosts efficiency with concurrent pump and valve control and increases bucket feel and control to deliver consistent performance.
- On-demand throttle feature that allows operators to maintain normal operation with the left pedal and implements while the 995 manages the engine speed.
- Reduced time spent on regular maintenance procedures thanks to features such as ground-level or platform access to filters; grouped service points; swing-out doors on both sides of the engine compartment; improved access for engine and pump drive service as well as to cooling package; and automatic lubrication system that greases the linkage, hitch, steering and axle trunnion bearings.
- Service station that provides easy access to functions such as coolant and oil as well as level indicators; Cat battery charging connector; and indicator lights for full fuel tanks.
- Redesigned pump bay, which offers improved access to transmission components, discharge ports located on the side of pumps, and lines routed directly to screen.
- Reduced number of steering hoses and tubes; removal of brackets and neutralizers, eliminating the need for neutralizer adjustment; and addition of pilot accumulator, EH valve and pilot filter.
- Improvements in filters and diagnostics across the machine, with groundline service that includes a steering pilot filter, transmission filters and steering pump discharge screen; pump bay that includes a brake pump filter, implement pilot filter and implement discharge screens; and diagnostic ports that are accessible from the front walk deck and pump bay.
- Approved for higher payloads in low to moderate digging resistance applications; increased payload intended for rehandled material in the ROM pad area or stockpile material, such as coal.
- Variety of bucket options, including rock buckets for loading limestone or other unprocessed rock; heavy-duty rock buckets for applications like face loading tightly compacted pit materials or handling materials of moderate abrasion and high impact; coal buckets for light density non-abrasive materials; and iron ore buckets for extremely aggressive applications.
- Performance Series Buckets feature extended floor, dual radius and angled side bars for fast loading; larger bottom box section for increased strength, high fill factors and good material retention; and taller side plate with a level top surface improves operator visibility to the bucket from the cab.
- Cat Ground Engaging Tools (GET) that feature CapSure™ Retention Technology, which simplifies component replacement with hammerless retention for fast, easy and safe installation.
- Highly durable structures, with full box-section rear frame that resists torsional shock and twisting forces to maximize life of mounted components.
- Frames that utilize castings in key areas to maximize frame durability and optimize efficiency.
- Rear axle mounting to frame that is optimized to better disperse loads for increased structural integrity.
- Loads efficiently transmitted by the field-proven solid steel lift arms, with enhanced strength in key pin areas through the use of one-piece castings.
- Frame, powertrain, engine and components that all built to be rebuilt — using new, remanufactured or rebuilt parts and components — to deliver multiple lives of like-new performance at a fraction-of-new price.
- Cat MineStar™ Terrain for loading, which provides real-time feedback on payloads and design plan progress to increases productivity and accuracy, reduce rework, enhance ore control and improve shift-to-shift operator performance.
- MineStar Object Detection, which combines radar and camera systems to warn operators about light vehicles or stationary hazards within the immediate vicinity of their machines.
- MineStar Health, which delivers critical event-based machine condition and operating data and includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.
- Upgraded touchscreen information display that provides intuitive operation and easy navigation and keeps operators informed about machine systems to decrease service time.
- Cat ProductLink™, which provides remote access to information on machine systems and diagnostic codes; allows you to track utilization, fuel usage and payload summaries; and gives access to machine location, service meter hours and reporting status.
- Designed to be more efficient and use less fuel, which reduces engine emissions and carbon footprint; Tier 4 Final engine reduces NOx and particulate matter.
- Engine Idle Shutdown, which saves fuel by making it possible to avoid unnecessary idling.
- Better control of fluids through use of Cat anti-drain filter housings and component ecology drains.
- Retrofits and upgrades for older machines — to incorporate efficiency improvements and emission reductions, and to keep them in production longer to conserve energy and minimize the need for raw materials
- Cat Rebuild and Cat Reman programs, which preserve raw materials, conserve energy and reduce emissions.
Standard Equipment
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground-level engine shutoff
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
- Standard lift
- Alternator
- Batteries, low maintenance
- 10/15 amp, 24V to 12V converter
- Disconnect switch to bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
- Bonded glass, tinted
- Trainer seat
- Dual-lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information
- Heater, defroster, auto temperature controls
- Powered cab precleaner
- Operator presence status
- Starting/charging system malfunction
- Electronic OMM
- Operator controls help
- Two USB charging ports
- CB mounting, 12V/24V power and antenna
- 14-pin service port
- 12V power
- Selectable application profiles
- Entertainment radio mute
- Push-To-Start (PTS)
- Warning/indicator instrumentation
- Keypad control with indicator lights
- Dome light in cab
- Lunchbox and beverage holders
- Electro-hydraulic force feedback steering
- Vital Information Management System (VIMS™) with information display: external data port, cycle timer
- Coat hook
- Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
- Ground-access ladders
- Rear-vision camera
- Front frame access with steps
- Front walkway around cab
- Pump bay access ladders with T-handle and platform
- Tie-offs on ROPS and radiator guards
- Steering frame lock
- Stairways on both sides of the machine
- LED stairway and access lights
- Toe kicks
- Electric (field and shop) horns
- Retractable seatbelt, 76 mm (3 in) wide
- Trainer seat with lap belt, 76 mm (3 in) wide
- Back-up alarm
- Secondary steering
- MineStar™ Health ready
- MineStar GUIDE ready
- MineStar Edge ready
- 12 hour (3240 L/856 gal)
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
- Service center light
- Implement and cooling fan oil level indicator
- Steering and brake oil level indicator
- Window washer solvent level indicator
- Transmission oil level indicator
- DEF level indicator (if equipped)
- Fuel level indicator
- Engine oil level indicator
- Engine coolant level indicator
- Automatic lubrication system grease tank level indicator
- DEF purge indicator lamp
- Transmission lockout and LED
- Starter lockout and LED
- Heavy-duty battery disconnect switch
- Stairway light switch
- Service lighting switch (if equipped)
- Fuel shutoff engine shutdown switch
- Engine oil fast-fill port
- Transmission oil fast-fill port
- Steering and brake hydraulic oil fast-fill port
- Steering and brake hydraulic oil drain port
- Oil renewal system fast-fill port (if equipped)
- Engine coolant fast-fill port
- DEF fill port (HRC only)
- Implement and cooling fan hydraulic oil fast-fill port
- Implement and cooling hydraulic oil drain port
- Automatic lubrication system grease tank fill port
- 24V jump-start receptacle
- 240V jacket water and engine oil heater plug (if equipped)
- 12V power port
- VIMS key switch
- 14-pin machine data port
- EH steering eliminates need for neutralizer adjustment
- In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Pump efficiency monitoring
- Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- High-speed engine oil change system
- Ground-level fast-fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT™ hoses
- Left-side service center
- Oil sampling valves
- Automatic Autolube filling shutoff valve
- Telematics and Cat Electronic Technician service port in bumper
- Air filter remaining useful life sensor
- Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Load-sensing steering
- Supplemental steering system
- Vandalism protection caplocks
- Cooling cleanout service package
- VIMS download and Cat Electronic Technician service port in bumper
- Service lights (engine bay, service center)
- EH steering eliminates need for neutralizer adjustment
- On demand throttle, HP Plus, and Enhanced ECO Modes
- Variable displacement implement pumps
- Variable displacement load sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch
Optional Equipment
- Oil Renewal System (ORS)* (for increased time between oil changes)
- High lift
- Rubber-mounted, high-impact resistant solar control glass
- Trainer seat with suspension
- Joystick lift and tilt function controls
- Bluetooth®-enabled machine security
- Sun screen, pull down (front and rear)
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
- Powered ground-access stairs
- Cat Detect (Rear Object Detection)
- Wheel chocks
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
- 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors (recommended for below-freezing temperatures)
- Cat Payload with Overload Prevention
- New Autodig Components:
– Tire slip prevention
– Lift stall prevention
– Tire set - Operator coaching
- 24 hour (5350 L/1414 gal)
- High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
- Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
- Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
- Tires – 58/85-57 84PR L4 (require 47" rims)
- 1194 mm (47") 152 mm (44 × 57) (6") flange
- 1194 mm (47") 127 mm (47 × 57) (5") flange
- Product Link™ satellite
- Product Link cellular
- Product Link (dual mode – satellite/cellular)
- Additional service lights (pump bay, front frame and bumper)
- Sound-suppression package