ATC-300+ CONTROLLER

SPECS SUMMARY

Rating Range	120 to 600V, single phase and three phase @ 50/60 Hz
Transfer Type	Switch application dependent
Switch Type	Switch application dependent
Input Control Voltage	65 to 145 Vac 50/60 hZ

The ATC-300+ is a comprehensive and multifunctional microprocessor-based ATS controller. It is a compact and self-contained panel-mounted device that is designed to replace traditional relay and solid-state logic panels. The ATC-300+ Controller provides programmed flexibility to address the needs of any system. It operates from all system voltages between 120 to 600V, single-phase and three-phase at 50 or 60 Hz. In addition, a period of no control power is provided. The controller monitors the condition of the three-phase line-to-line voltage and frequency of Source 1 and Source 2 power sources and can be programmed for single-phase operation. The ATC-300+ Controller provides the intelligence to ensure that the ATS operates properly through a series of programmed sensing and timing functions.

Specifications
Benefits and Features

Specifications

Rating Range	120 to 600V, single phase and three phase @ 50/60 Hz
Transfer Type	Switch application dependent
Switch Type	Switch application dependent
Input Control Voltage	65 to 145 Vac 50/60 hZ
Voltage Measurements of Utility	Source 1 VAB Source 2 VAB Source 1 VAC Source 2 VBC Source 1 VCA Source 2 VCA
Voltage Measurement Range	0 to 790 VAC rms (50/60 Hz)
Voltage Measurement Accuracy	+/-2% of nominal input voltage
Frequency Measurements Of	Source 1 and Source 2
Frequency Measurement Range	40 Hz to 70 Hz
Frequency Measurement Accuracy	+/- 0.1 Hz
Undervoltage Dropout	50% to 90% of nominal voltage
Undervoltage Pickup	(Dropout +2%) to 99% of the nominal system voltage
Underfrequency Dropout Range	90 to 97% of the nominal system frequency
Underfrequency Pickup Range	(Dropout +1 Hz) to 99% of the nominal system frequency
Overfrequency Dropout Range	103 to 110% of the nominal system frequency
Overfrequency Pickup Range	101% to (dropout - 1 Hz) of the nominal system frequency
Operating Temperature Range	-20 to 70 degree C (-4 to +158 degree F)
Storage Temperature Range	-30 to 85 degree C (-22 to +185 degree F)
Operating Humidity	0 to 95% relative humidity (noncondensing)
Operating Environment	Resistant to ammonia, methane, nitrogen,hydrogen and hydrocarbons
Generator Start Relay	5A, 1/6 hp @ 250 Vac Vac 5A @ 30 Vdc with a 150W maximum load
K1, K2 Relays	10A, 1-3 hp @ 250 Vac 10A@30 Vdc
Applicable Testing	UL-recognized component Meets intent of UL 991 & UL 1008 Meets IEC 1000-4-2, 1000-4-3, 1000-4-4
Applicable Testing Continued	1000-4-5, 1000-4-6, 1000-4-11 CISPR 11, Class A FCC Part 15, Class A CSS 22.2-178
Enclosure Compatibility	NEMA 1, NEMA 3R and NEMA 12 UV-resistant ATC-300+ faceplate

Benefits and Features

Product Features

Auxiliary relay contacts:

Source 1 present 2NO and 2NC
Source 2 present 2NO and 2NC

Source 1 and source 2 sensing:

Undervoltage / underfrequency
Overvoltage / overfrequency
Three-phase rotation protection
Three-phase voltage unbalance/loss

Pre-transfer signal contacts 1NO and 1NC
Go to emergency (Source 2)
Seven field-programmable time delays
LCD-based display for programming, system diagnostic and help message display
Mimic diagram with source available and connected LED indication
Time-stamped history log
System test pushbutton
Programmable plant exercise (off, daily, 7,14 and 28 day) interval selectable run time 0-600 minutes no load/load with fail-safe
Integral overcurrent protection (optional)
In-phase transition
Stainless steel cover for controller (optional)
Communications via RS-232 or Modbus through an integrated RS-485 port (optional)