3516E (50 HZ) | 2750-3100 kVA Diesel Generator

3516E (50 Hz)

SPECS SUMMARY

Standby Rating	3000 kVA (3100 kVA without fan)
Prime Power Rating	2750 kVA (2850 kVA without fan)
Emissions/Fuel Strategy	Low Fuel Consumption
Voltage	380 to 11000 volts

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Specifications

Standby Rating	3000 kVA (3100 kVA without fan)
Prime Power Rating	2750 kVA (2850 kVA without fan)
Emissions/Fuel Strategy	Low Fuel Consumption
Voltage	380 to 11000 volts
Frequency	50 Hz
Speed	1500 rpm
Duty Cycle	Standby, Mission Critical, Prime
Maximum Rating	3000 kVA (3100 kVA without fan)
Minimum Rating	2750 kVA (2850 kVA without fan)
Engine Model	3516E, SCAC, V-16, 4-Stroke, Water-Cooled Diesel
Bore	6.69 in (170 mm)
Stroke	8.46 in (215 mm)
Displacement	4766 in (78.1 l)
Compression Ratio	14:01
Aspiration	TA
Fuel System	Electronic unit injection
Governor Type	Adem™ A5
Length - Maximum	296.8 in (7538 mm)
Width - Maximum	87.2 in (2216 mm)
Height - Maximum	133.5 in (3391 mm)
Dry Weight - Genset (maximum)	43541 lb (19750 kg)

Benefits and Features

Cat Generator Set Package

Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR5 Alternator

Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation

EMCP 4 Control Panel

User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements

Cooling System

Designed to operate in standard ambient temperatures up to 50°C (122°F)
Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

EU Declaration of Conformity
EU Declaration of Incorporation
Eurasian Conformity (EAC)
Telecommunication Lab of China

One Safe Source

Components used in the generator set are selected at the design stage to provide optimum package performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility
Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment

Air Inlet System

Air cleaner
Single element canister type with service indicator

Control Panel

Environmental sealed front face
Warning/shutdown with common LED indication of shutdowns for:
Overspeed
RPM
Generator phase sequence
Emergency stop pushbutton
Digital indication for:
Text alarm/event descriptions
2 Programmable digital outputs
Reverse reactive power (kVAr) (32RV)
Reverse power (kW) (32)
Failure to start (overcrank)
Panel lights
Speed adjust
Oil pressure (psi, kPa or bar)
Low coolant level
Generator mounted - rear facing
Over/under frequency (81 o/u)
Lamp test
True RMS AC metering, 3-phase, +/-2% accuracy
Low coolant temperature
Power factor (per phase & average)
Frequency (Hz)
Overcurrent (50/51)
High coolant temperature
DC volts
6 Programmable digital inputs
Coolant temperature
24 Volt DC operation
Amps (per phase & average)
Emergency stop
Alarm acknowledge
Programmable protective relaying functions:
2 Programmable relay outputs (Form C)
EMCP 4.2B
Serial annunciator module data link
Controls:
kW-hr (total)
kW (per phase, average & percent)
Engine cool-down timer
Operating hours
EMCP 4 Genset controller
Volts (L-L & L-N)
Engine cycle crank
Communications:
kVAr (per phase, average & percent)
EMCP4.2B controller includes:
Customer data link (Modbus RTU)
Over/under voltage (27/59)
Low oil pressure
kVA (per phase, average & percent)
kVAr-hr (total)
4 Programmable relay outputs (Form A)
Accessory module data link

Exhaust

Exhaust flange outlet

Fuel

Primary fuel filter with integral water separator

Generator

IP23 Protection
Matched to the performance and output characteristics of Cat engines

Power Termination

Busbar

Starting/Charging

Heavy duty starting system
Charging alternator

Cooling System

Cooling

Package mounted radiator

Exhaust System

Dry exhaust manifold
Flanged faced outlet(s)

Fuel System

Secondary fuel filters
Fuel priming pump
Fuel cooler; not included with packages without radiator
Flexible fuel lines - shipped loose

Generators and Attachments

Internal excitation (IE)
6 Lead
Busbar connections, top center mounted, top cable entry
IEC standard hole pattern
Random wound
3 Phase brushless, Salient pole
Winding temperature detectors
NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby).
Generator set packages include Caterpillar's digital voltage regulator (CDVR). CDVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter