• Reliable, rugged, durable design
• Field-proven in thousands of applications worldwide
• Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

• Superior motor starting capability minimizes need for oversizing alternator
• Designed to match performance and output characteristics of Cat diesel engines
• Robust Class H insulation

• User-friendly interface and navigation
• Scalable system to meet a wide range of installation requirement
• Expansion modules and site-specific programming for specific customer requirements

• Designed to operate in standard ambient temperatures up to 55°C (131°F)
• Contact your Cat Dealer for specific ambient and altitude capabilities

UL2200 Listed; CSA 22.2; Certification of Compliance – IBC Seismic; Dual IBC & HCAI

• Components used in the generator set are selected based on seamless design integration to provide the optimum performance
• The generator set is fully assembled at a Caterpillar facility following our quality guidelines
• Each generator set package is tested before leaving the Caterpillar facility
• Cat product support, including dealer service, parts and warranty covers the entire Cat power system

• Cat dealers have over 1,800 dealer branch stores operating in 200 countries
• Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

• Air cleaner

• GCCP 1.3
• GCCP Genset Controller

• Package mounted radiator

• Coolant drain line with valve
• Fan drive, battery charging alternator drive
• Caterpillar extended life coolant
• Radiator and cooling fan with guard

• Base, formed steel with single wall integral 8-hour fuel tank
• Standard open set fuel tank/base supplied
• Exhaust flange outlet

• Primary fuel filter with integral water separator
• Secondary fuel filters
• Fuel priming pump

• Engine fuel transfer pump
• Flexible fuel lines
• Fuel cooler
• Fuel priming pump
• Primary fuel filter w/integral water separator and secondary filter

• IP23 Protection
• Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
• Matched to the performance and output characteristics of Cat engines

• Busbar

• Rubber vibration isolators

• Segregated low voltage (AC/DC) wiring panel
• Optional LC Frame generator - IP23 Protection
• Power center, IP22
• Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
• Integrated voltage regulator (IVR)
• A Frame generator - IP21 Protection

• Cat electronic governor (ADEM A4).

• Oil drain valves
• Oil cooler

• Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

• 24 Volt battery with rack and cables
• 24 volt starting motor
• Batteries

• Engine and alternator pre paint, Caterpillar yellow
• Paint - Caterpillar yellow except rails and radiators gloss black

• Industrial, residential, critical mufflers

• Global certification for CIS
• EU Certificate of Conformance (CE)

• Anti-condensation heater
• Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
• Oversize and premium generators

• 4 Pole (IEC-100% rated) Circuit breakers - Package mounted
• Power terminal strip
• 4 Pole (IEC-100% rated) Circuit breakers - Motorised
• Shunt trip for IEC circuit breaker
• Padlockable circuit breaker device
• Auxiliary contacts, circuit breaker
• 3 Pole (IEC-100% rated) Circuit breakers - Motorised
• 3 Pole (IEC-100% rated) Circuit breakers - Package mounted

• Circuit breakers, IEC compliant
• Circuit breakers, UL listed

• Remote annunciator module
• Local alarm horn
• Local annunciator
• Oil temperature displays
• GCCP 1.4
• Volt free contacts
• Protective devices: Earth fault relay ; Earth leakage Ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor

• Charging alternator
• Battery chargers
• Oversize batteries
• Heavy duty starting system
• Jacket water heater

• Low coolant temperature alarm
• Stone guards
• Radiator duct flange

• Sound attenuated enclosures
• High ambient sound attenuated enclosures

• Engine mounted muffler
• 6 and 8 inch elbow kit
• Manifold and turbocharger guards
• End in/end out mufflers - 10, 25 and 35 dBA attenuation
• 6 and 8 inch flange GP
• Flexible exhaust fittings

• Fuel transfer system controls
• Manual fuel transfer pump
• Dual wall fuel tank base

• Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
• Sound attenuated, weather protective or high ambient weather protective enclosure
• EU Certificate of Conformance (CE)
• Single or dual wall integral fuel tanks
• CSA Certification
• EEC Declaration of Conformity
• Narrow, wide or skid base
• Integral & sub-base UL listed dual wall fuel tanks
• Automatic transfer switches (ATS)
• UL 2200 package
• The following options are based on regional and product configuration:
• Single or dual wall sub-base fuel tanks

• Oversize LC frame generator
• Oversize A Frame generator
• CIP A Frame generator
• LC frame generator
• LC frame CIP generator
• Ingress protection
• Permanent magnet excitation (PMG) generator
• Space heaters

• Manual sump pump

• Narrow skid base - replaces standard fuel tank base

• PGS Test report @ 1.0 power factor
• PGS Test report @ 0.8 power factor

• 5 Amp single Battery charger
• Battery disconnect switch
• Jacket water heater