C18 (60 HZ) | 500-600 EKW Diesel Generator

Request Info

Contact Us For Price

SPECS SUMMARY

Maximum Rating 600 ekW
Minimum Rating 500 ekW
Emissions/Fuel Strategy Low Fuel Consumption
Voltage 220 to 380 Volts
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Specifications

Maximum Rating 600 ekW
Minimum Rating 500 ekW
Emissions/Fuel Strategy Low Fuel Consumption
Voltage 220 to 380 Volts
Frequency 60 Hz
Speed 1800 rpm
Duty Cycle Standby, Prime
Engine Model C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore 5.71 in (145 mm)
Stroke 7.2 in (183 mm)
Displacement 1106.4 in³ (18.1 l)
Compression Ratio 14.5:1
Aspiration Air to Air Aftercooled
Fuel System Electronic unit injection
Governor Type Adem™A4
Length - Maximum 218.5 in (5550 mm)
Width - Maximum 80.9 in (2056 mm)
Height - Maximum 107.8 in (107.8 mm)

Benefits and Features

        
  • Cat generator set packages have been fully prototype tested
  •     
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  •     
  • Conform to ISO 8528-5 steady state and transient response requirements

        
  • Reliable, rugged, durable design
  •     
  • Field-proven in thousands of applications worldwide
  •     
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

        
  • Superior motor starting capability minimizes need for oversizing alternator
  •     
  • Designed to match performance and output characteristics of Cat diesel engines
  •     
  • Robust Class H insulation

        
  • User-friendly interface and navigation
  •     
  • Scalable system to meet a wide range of installation requirement
  •     
  • Expansion modules and site-specific programming for specific customer requirements

        
  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  •     
  • Contact your Cat Dealer for specific ambient and altitude capabilities

UL2200 Listed; CSA 22.2; Certification of Compliance – IBC Seismic; Dual IBC & HCAI

        
  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  •     
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  •     
  • Each generator set package is tested before leaving the Caterpillar facility
  •     
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

        
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  •     
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment

  • Air cleaner
  • Package mounted radiator
  • Exhaust flange outlet
  • Fuel priming pump
  • Secondary fuel filters
  • Primary fuel filter with integral water separator
  • IP23 Protection
  • Matched to the performance and output characteristics of Cat engines
  • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
  • GCCP 1.3
  • Rubber vibration isolators
  • 24 volt starting motor
  • Batteries
  • Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment

  • Industrial, residential, critical mufflers
  • Anti-condensation heater
  • Oversize and premium generators
  • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
  • Circuit breakers, UL listed
  • Circuit breakers, IEC compliant
  • Remote monitoring software
  • Local & remote annunciator modules
  • Digital I/O module
  • GCCP 1.4
  • Load share module
  • Oversize batteries
  • Battery chargers
  • Heavy duty starting system
  • Jacket water heater
  • Charging alternator
  • Narrow, wide or skid base
  • CSA Certification
  • UL 2200 package
  • EU Certificate of Conformance (CE)
  • Enclosures: Sound attenuated, weather protective
  • Single or dual wall integral fuel tanks
  • Integral & sub-base UL listed dual wall fuel tanks
  • Automatic transfer switches (ATS)
  • Sound attenuated, weather protective or high ambient weather protective enclosure
  • The following options are based on regional and product configuration:
  • Single or dual wall sub-base fuel tanks
  • EEC Declaration of Conformity
  • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
  • Optional BS799 Compliant Integral Dual Wall Fuel Tank Base