• Reliable, rugged, durable design
• Field-proven in thousands of applications worldwide
• Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

• Superior motor starting capability minimizes need for oversizing alternator
• Designed to match performance and output characteristics of Cat diesel engines
• Robust Class H insulation

• User-friendly interface and navigation
• Scalable system to meet a wide range of installation requirement
• Expansion modules and site-specific programming for specific customer requirements

• Designed to operate in standard ambient temperatures up to 55°C (131°F)
• Contact your Cat Dealer for specific ambient and altitude capabilities

Cat® generator set packages have been fully prototype tested, and certified torsional vibration analysis reports are available. The packages are designed to meet the NFPA 110 requirement for loading, and conform to the ISO 8528-5 steady state and transient response requirements.

• Components used in the generator set are selected based on seamless design integration to provide the optimum performance
• The generator set is fully assembled at a Caterpillar facility following our quality guidelines
• Each generator set package is tested before leaving the Caterpillar facility
• Cat product support, including dealer service, parts and warranty covers the entire Cat power system

• Cat dealers have over 1,800 dealer branch stores operating in 200 countries
• Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

• GCCP 1.3
• EMCP4.4 control panel

• Radiator and cooling fan with guard
• Fan drive, battery charging alternator drive
• Coolant drain line with valve
• Caterpillar extended life coolant
• Radiator and cooling fan with guard

• Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose
• Flange for customer; shipped loose
• Stainless steel exhaust flex, gaskets, rain cap and SAE exhaust

• Standard open set fuel tank/base supplied
• Base, formed steel with single wall integral 8-hour fuel tank
• Standard open set fuel tank/base supplied
• Base, formed steel with single wall integral 8-hour fuel tank

• Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
• Power centre, IP22
• Voltage regulator (single phase sensing)
• 12 Leads
• IP23 Protection
• Segregated low voltage (AC/DC) wiring panel
• IP23 Protection
• 12 Leads

• Cat electronic governor (ADEM A4)
• Cat electronic governor (ADEM A4)

• Oil cooler
• Lubricating oil
• Oil drain valves

• Captive linear vibration isolators between base and engine-generator
• Includes lifting provisions and termination points for coolant and lube oil drain lines

• 24V battery with rack and cables

• Engine and alternator re-paint, Caterpillar yellow
• Engine and alternator re-paint, Caterpillar yellow

• Single element air cleaner

• 4 Pole (IEC-100% rated) Circuit breaker upgrades: 400, 630, 800 and 100 amps

• Oil temperature displays
• Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor

• Radiator duct flange
• Low coolant temperature alarm

• Sound attenuated enclosure
• High ambient sound attenuated enclosure

• Mufflers - End in/end out; 10 dBA or 25 dBA attenuation
• 5 and 6 inch elbow kits
• 6 inch flange
• 5 - 6 inch flange adaptor

• Integral dual wall fuel tank base

• Permanent magnet excitation (PMG) generator
• Oversize, AREP, CIP generators

• Narrow skid base

• Battery disconnet switch
• Jacket water heater
• 5 Amp single Battery charger