D550 GC C18 (60 Hz) | 550 kW Diesel Generator
Contact Us For Price
SPECS SUMMARY
Maximum Rating | 550 ekW |
Minimum Rating | 550 ekW |
Emissions/Fuel Strategy | EPA Stationary Emergency |
Voltage | 480 to 600 Volts |
Specifications
Maximum Rating | 550 ekW |
Minimum Rating | 550 ekW |
Emissions/Fuel Strategy | EPA Stationary Emergency |
Voltage | 480 to 600 Volts |
Frequency | 60 Hz |
Speed | 1800 rpm |
Duty Cycle | Standby |
Engine Model | Cat® C18 In-line 6, 4-cycle diesel |
Bore | 5.7 in (145 mm) |
Stroke | 7.2 in (183 mm) |
Displacement | 1106 in³ (18.1 l) |
Compression Ratio | 14.5:1 |
Aspiration | Turbocharged Air-to-Air Aftercooled |
Fuel System | MEUI |
Governor Type | ADEM™A4 |
Length - Maximum | 196.1 in (4980 mm) |
Width - Maximum | 73.4 in (1865 mm) |
Height - Minimum | 79.1 in (2009 mm) |
Height - Maximum | 100.9 in (2563 mm) |
Dry Weight - Genset (minimum) | 8776.6 lb (3981 kg) |
Dry Weight - Genset (maximum) | 11464 lb (5200 kg) |
Benefits and Features
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.2 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to104°F (40°C)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
- UL 2200 Listed
- ULC Certification Available
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment
- Air cleaner - Non-Canister, Disposable
- Aftercooler core
- Turbocharger
- GCCP 1.2
- Jacket water pump, gear driven, centrifugal
- Radiator, Package mounted.
- Radiator sight gauge
- Thermostats and housing.
- Blower fan and fan drive with guards
- Coolant drain valve.
- Exhaust manifold; dry
- Fuel priming pump
- Primary fuel filter w/integral water separator and secondary filter, spin on
- Engine fuel transfer pump
- Fuel cooler
- Integral Tank Base, 24 Hrs, UL142
- Complete system designed & built at ISO 9001:2000 certified facilities
- All protective devices and control functions simulated and checked
- Factory tested to design specifications at full load conditions
- Insulation, Class H
- Standard winding protection for non-harsh environments with relative humidity ? 95%
- Terminal Box, IP22 RHS Facing, Bottom Cable Entry
- IP23 protection
- 6 leads
- Voltage regulator (single phase sensing)
- Easy access to AVR and terminals
- Brushless, self-excited 2/3 pitch (600V uses Internal Excitation)
- Cat Electronic Governor (ADEM A4)
- Lubricating Oil, CK-4 (10W-30)
- Oil cooler
- Oil drain with valve.
- Shallow oil pan.
- Oil filter, spin on.
- Fumes disposal to front of radiator.
- Oil filler and dipstick.
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines
- Safety Shutoff - Overspeed
- Safety Shutoff - Low Oil Pressure
- Safety Shutoff - High water temperature
- 24-volt electric starting motor.
- 24V,45 amp charging alternator.
- Lifting Eyes
- Parts Book
- Vibration damper.
Optional Equipment
- Air Cleaner (Non-Canister Disposable)
- Integral Tank Base, 24 Hrs, UL142
- Fuel Tank Fill Pipe & Lockable Cap
- Audio & Visual Fuel Alarm (@90% Fuel Level)
- 5 gallon Spill Containment
- Overfill Prevention Valve
- Wide Base - Skid
- 400A LS/I
- 1200A LS/I
- Auxiliary Contacts
- 800A LSI
- 800A LS/I
- 600A LSI
- 600A LS/I
- 400A LSI
- 1200A LSI
- Volt Free Contacts
- 20A GFCI (Ground Fault Circuit Interrupter)
- 16 -light NFPA 99/110 Annunciator
- Twist Release, Red Button Emergency Stop
- Product Link Remote Monitoring hardware
- 100A Load Center
- Ground Fault Relay
- Audible Alarm Gp
- Annunciators box
- Remote E-Stop button
- Local annunciator
- Discrete I/O module
- Volt free contact
- Earth (Ground) fault relay
- Sound Attenuated Level 2 Enclosure (White)
- AC & DC Source Lights
- E-Stop
- Sound attenuated enclosure
- Flexible Exhaust Connection
- Manifold & Turbocharger Guards
- 8" Muffler - 25 dBA Attenuation
- Space Heater
- Permanent Magnet Generator
- Standard Battery Set: 1000 CCA, 90 amp/hr.
- Battery Charger (UL Certified)
- Jacket Water Heater
- Oversize Battery Set, 1400 CCA, 200 amp/hr.
- CSA Certification
- Extended Service Coverage
- UL2200 Certification
- Generator Test Report
- Tool set
- Single LSI motorised circuit breaker
- Auxiliary contacts
- Neutral bar (208V)
- Jacket water heater with pump
- Coolant heater
- Stone guards
- Audio & visual fuel alarm
- Integral 8 hr tank base
- Oversize battery set
- Battery disconnect switch
- 5 Amp battery charger
- Standard battery set
- UL2200 Listed
- CSA 22.2
- Seismic
- Manual sump pump