D60 GC C4.4 (60 HZ) | 60 kW Diesel Generator

« Go back to Electric Power
Request Info

Contact Us For Price

SPECS SUMMARY

Maximum Rating60 ekW
Minimum Rating60 ekW
Emissions/Fuel StrategyU.S. EPA Cert., Tier 3
Voltage208 to 600 Volts
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Specifications

Maximum Rating60 ekW
Minimum Rating60 ekW
Emissions/Fuel StrategyU.S. EPA Cert., Tier 3
Voltage208 to 600 Volts
Frequency60 Hz
Speed1800 rpm
Duty CycleStandby
Engine ModelC4.4, In-line 4, 4-cycle diesel
Bore4.1 in (105 mm)
Stroke5 in (127 mm)
Displacement269 in (4.4 l)
Compression Ratio16.7:1
AspirationTurbocharged
Fuel SystemElectronic (adjustable)
Governor TypeMechanical, ADEM™A4
Length - Maximum77.2 in (1962 mm)
Width - Maximum43.3 in (1100 mm)
Height - Maximum48 in (1220 mm)
Dry Weight - Genset (maximum)2054 lb (932 kg)

Benefits and Features

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

  • UL 2200 Listed
  • ULC Certification Available

  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment

  • IBC seismic and wind Certifications
  • Air cleaner
  • Cartridge type air filter
  • Breakers (100% UL rated)
  • 3-Pole 100% rated
  • Second circuit breaker box
  • Power terminal strip
  • NFPA battery charger UL10A 120VAC
  • GCCP 1.2 Control panel
  • Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
  • Standard open set fuel tank/base supplied base, formed steel with single wall integral 24-hour fuel tank
  • WSS1 Low coolant level shut down
  • FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected
  • NFPA110 bundle includes:
  • WCA1 Low coolant temperature alarm
  • A Coolant heater, remote annunciator or 0.8 power factor test may be required depending on the application
  • PBC10NU NFPA battery charger
  • Oil temperature gauge and sender
  • PAA1 Panel mounted audible alarm
  • Ground fault relay
  • Remote E-stop button
  • Remote annunciator module
  • Audible alarm
  • Volt free contacts genset run and common alarm
  • Discrete I/O module
  • Overload shutdown via breaker
  • Low coolant temperature alarm
  • Protective devices:
  • Fuel level reading
  • Low coolant level shutdown
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Caterpillar extended life coolant
  • Radiator and cooling fan with guards
  • Radiator stone guard
  • 12 Leads
  • Mechanical and electrical governing system - model dependent
  • Oil drain line with valve
  • Lubricating oil
  • Engine and alternator pre-paint, Caterpillar yellow
  • Batteries
  • 24V battery with rack and cables

Optional Equipment

  • IBC seismic and wind Certifications
  • R Frame auxilliary winding
  • Cartridge type air filter
  • NFPA battery charger UL10A 120VAC
  • Breakers (100% UL rated)
  • 3-Pole 100% rated
  • Second circuit breaker box
  • Power terminal strip
  • NFPA110 bundle includes: FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected - WSS1 Low coolant level shut down - WCA1 Low coolant temperature alarm - PAA1 Panel mounted audible alarm - PBC10NU NFPA battery charger - A Coolant heater ,remote annunciator or 0.8 power factor test may be required depending on the application
  • Ground fault relay
  • Remote E-stop button
  • Volt free contacts genset run and common alarm
  • Oil temperature gauge and sender
  • Audible alarm
  • Remote annunciator module
  • Protective devices: Low coolant temperature alarm - Low coolant level shutdown - Fuel level reading - Overload shutdown via breaker
  • Discrete I/O module
  • Radiator transition flange
  • Sound attenuated enclosure, Level 1
  • External emergency stop
  • Sound attenuated Level 2 Enclosure (White)
  • Panel viewing window
  • 10, 25 and 35 dBA silencer systems
  • Overhead silencer mounting kit
  • Emergency vent pipe
  • Tank riser
  • 5 Gallon spill containment
  • 209 and 394 gallon sub-base fuel tanks
  • 5 Gallon fill containment
  • Battery heater
  • Jacket water heater
  • Coolant heater
  • Anti-condensation heater
  • Wiring for canopy space heater
  • Lube oil sump heater
  • Permanent magnet excitation (PMG) generator
  • Cat Alternator
  • Seismic vibration isolators
  • 4 Hour factory test
  • Generator test report
  • PGS Test report @ 0.8 power factor
  • PGS Test report @ 1.0 power factor