CG132B-16 | 400kW-800kW Gas Generator

Request Info

SPECS SUMMARY

Maximum Continuous Rating800 kW @1.0pf
Fuel TypeNatural Gas, Biogas
Maximum Electrical Efficiency43.5% / 42.6%
Maximum Standby Rating800 kW
The Cat CG132B family of gas engines are perfectly tailored to the challenges of the power plant in an age of global value chains.<br>
<br>
Highly efficient with low operating and installation costs and lubricant consumption, the Cat CG132B gas generator set is available with outputs from 400kW to 800kW and comes with the Total Plant and Energy Management (TPEM) system.

Specifications

Maximum Continuous Rating800 kW @1.0pf
Fuel TypeNatural Gas, Biogas
Maximum Electrical Efficiency43.5% / 42.6%
Maximum Standby Rating800 kW
Frequency50 / 60 Hz
RPM1500 / 1800 rpm
Engine ModelCG132
Displacement2135.8 in³ (35 l)
AspirationTA
Bore5.2 in (132 mm)
Stroke6.3 in (160 mm)
Length165 in (4200 mm)
Width70 in (1780 mm)
Height85 in (2150 mm)
Dry Weight - Genset17691 lb (8070 kg)

Benefits and Features

Lower Operating Costs

  • Optimized engine components mean the CG132 uses up to 50 percent less lubricating oil than competing generator sets, which means more money stays in your company's pockets

Smaller footprint

  • The CG132 uses nearly 50 percent less space than similar system
  • Less space means lower installation costs

Cat Total Electronic Management System

  • Temperature and pressure monitoring for each cylinder
  • Anti-knock control allow for maximum power output and the best possible fuel utilization, even if gas composition changes

Flexible Fuel Usage

  • Our gas-mixer technology and Total Electronic Management System let you use a wide variety of gases, including problematic gases like digester, landfill and sewage gases

Standard Equipment

  • Turbocharger with a water-cooled bearing case for all cylinder
  • One-element single-stage air cleaner with enclosure and sevice indicator
  • TPEM (Total Plant & Energy Management System)
  • Flange connections for JW inlet and outlet
  • Jacket water and SCAC thermostats
  • Electrical jacket water and aftercooler coolant pump
  • flange connections for JW inlet and outlet
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Cat flanges on SCAC circuit
  • Exhaust waste gate for the CG132B-16
  • Closed crankcase ventilation system
  • PEARL/Low resistence exhaust system
  • Electronic fuel metering valve
  • Independently controlled cylinder monitoring and ignition system
  • Pre-chamber spark plugs
  • grid code generator
  • Reactive droop
  • closed-coupled generator result in no torque transmission to the base frame
  • Busbar connections
  • Anti-condensation space heater
  • 3-phase sensing and KVAR/PF control
  • Winding temperature detectors
  • 24V starting motors
  • Battery disconnect switch
  • Crankshaft vibration damper and guard

Optional Equipment

  • Air cleaner with precleaner
  • Mounting stand
  • CHP skid