DG275 GC (3 phase)
Contact Us For Price
SPECS SUMMARY
| Frequency | 60 Hz |
| Natural Gas Rating | 275 eKW |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Application |
| Fuel System | Carburetor, Down Draft |
Specifications
| Frequency | 60 Hz |
| Natural Gas Rating | 275 eKW |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Application |
| Fuel System | Carburetor, Down Draft |
| Compression Ratio | 9.5:1 |
| Displacement | 864.71 in³ (14.17 l) |
| Speed | 1800 rpm |
| Bore | 5.31 in (135 mm) |
| Stroke | 6.5 in (165 mm) |
| Length | 136 in (3455 mm) |
| Width | 57.6 in (1463 mm) |
| Height | 66.1 in (1678 mm) |
| Weight | 6274 lb (2852 kg) |
Benefits and Features
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
- UL 2200 listed packages
- CSA Certified
- Certain restrictions may apply.
- Consult with your Cat® Dealer.
Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries.
Standard Equipment
- Factory-installed radiator
- 50/50 Ethylene glycol antifreeze
- Closed coolant recovery system
- Standard ambient temperatures up to 50°C (122°F)
- Radiator and cooling fan complete with protective guards
- Single element air filter
- Primary and secondary fuel shut-off
- Low fuel pressure switch
- Fuel pressure test po
- Dual lock off valves
- NPT connection
- Natural Gas or LP Vapor
- Class H insulation material
- Permanent magnet excitation
- Full load capacity alternator
- Permanent magnet excitation
- Integrated Voltage Regulator
- Class H insulation material
- Full load capacity alternator
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Exhaust outlet with 3” pipe
- EMCP 4.2 Series generator set controller
- Vibration isolaton (puck type)
- Rubber vibration isolators
- Solenoid activated starter motor
- Engine electrical system
- Battery cables
- Solenoid activated starter motor
- Battery charging alternator
- Electronic governor (non adjustable)
- EMCP 4.2 Series generator set controller
- Batteries with rack and cables
- 12 volt starting motor
Optional Equipment
- Charging alternator
- Jacket water heater
- Battery heater
- Battery charger – UL Listed 10 amp
- Suitable for Use as Service Equipment (SUSE)
- CSA Certification
- Enclosures: sound attenuated, weather protective
- Automatic transfer switches (ATS)
- UL 2200 package
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker
- Thermal magnetic or electronic trip MCCBs
- Excitation: [ ] Permanent Magnet Excited (PM)
- Anti-condensation heater
- Oversize and premium generators