C280-16

« Go back to Marine Power Systems
Request Info

Contact Us For Price

SPECS SUMMARY

Power Range 6169-8046 bhp (4600-6000 bkW)
Speed Range 900-1000 rpm
Emissions IMO II
Aspiration TTA
Building on the durability and reliability of the C280 engine platform, Caterpillar is pleased to offer the C280-16 engine line, now up to 6000 bkW. The core components are the same as the existing C280, including the latest in EUI fuel system capabilities and state-of-the-art ADEM™ A3 Electronic Control Unit (ECU) features. Caterpillar® products continue to deliver more available power while delivering outstanding fuel efficiency. You can also count on long maintenance intervals and worldwide Caterpillar parts and service availability.

Specifications

Power Range 6169-8046 bhp (4600-6000 bkW)
Speed Range 900-1000 rpm
Emissions IMO II
Aspiration TTA
Bore 11 in (280 mm)
Stroke 11.8 in (300 mm)
Displacement 18062 in³ (296 l)
Rotation from Flywheel End Counterclockwise or clockwise
Minimum Dry Weight 62832 lb (28500 kg)
Minimum Length 224 in (5690 mm)
Maximum Length 224 in (5690 mm)
Minimum Height 134 in (3403 mm)
Maximum Height 134 in (3403 mm)
Minimum Width 80 in (2032 mm)
Maximum Width 80 in (2032 mm)
Configuration Vee 16, 4-Stroke-Cycle Diesel

Benefits and Features

• CAN J1939 data link • Waterproof connectors • Maintenance-free • Backup ECU for redundant governing • Updated A4 ECU for 6000 bkW

• Load feedback • Programmable droop • Adjustable gain • Adjustable fuel/air ratio control • Histograms of engine operation • Cat Messenger display presents diagnostics and other engine parameters

• Engine speed • Boost pressure • Throttle position • Fuel consumption rate • Inlet manifold temperature • Diagnostic codes and events • Configuration • Desired engine speed • Battery voltage • Engine load • Lifetime totals — engine hours, fuel burned, idle fuel, idle hours • Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset

• Interfaces with standard Cat® Marine Monitoring System (PLC in Price List) • Provides visual indication of ECU functionality • Accepts 4 — 20 mA or PWM remote throttle speed input • Marine alarm and protection

• “Drop-in” installation • No threaded fuel connections • High pressure inside injector only • Does not require double wall fuel lines or leak collection device • Injector synchronization not required

Standard Equipment

  • LH and RH service availability
  • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Dual turbochargers, rear-mounted, engine oil lubricated
  • Breather, crankcase, top-mounted
  • Air inlet adapter - Straight / 90 degree / 35 degree
  • Dual Caterpillar ADEM A4 Electronic Engine Control Modules
  • Rigid Wiring Harness
  • Aftercooler / Oil cooler and jacket water gear driven pumps
  • Engine coolant water drains
  • Single Circuit / Separate Circuit Aftercooler
  • Dry exhaust manifold
  • Turbo speed sensors - overspeed protection
  • Fuel transfer pump, gear driven
  • Electronically Controlled Unit Injectors
  • Duplex Fuel filters
  • CAT Alarm & Protection System
  • Oil pump, gear driven
  • 3 element oil cooler, engine mounted
  • Duplex centrifugal oil filter, engine mounted
  • Oil pump, gear driven
  • Wet sump
  • Prelube pump - air / electric
  • Crankcase explosion relief valves

Optional Equipment

  • Exhaust manifold shielding, soft
  • SOLAS shielding
  • Front and rear oil pan drains
  • SOLAS shielding
  • Mounted oil mist detector
  • Cylinder pressure relief valves