C32 ACERT Tier 3 Recreational

Request Info

Contact Us For Price


Power Range1600-1900 bhp (1193-1417 bkW)
Speed Range2300 rpm
EmissionsEPA Tier 3, IMO II, EU IW
C32 ACERT propulsion engine ratings of 1925 mhp (1900 bhp) 1417 bkW, 1825 mhp (1800 bhp) 1342 bkW, and 1622 mhp (1600 bhp) 1193 bkW are available with heat exchanger cooling. These ratings are compliant for U.S. EPA Tier 3 Recreational, EU Stage IIIA, and IMO II. The 1600 and 1800 bhp ratings are also meet US EPA Tier 3 Commercial Standards. The engine configuration includes an air cleaner and CCV system as well as jacket water aftercooling. Additional features include a “plug-in PTO”, an MECP I control panel, and hybrid fuel lines. The MECP I panel has a monochrome display for engine parameters, external outputs for customer installed visible and audible alarms, Start/Stop buttons, and an Off/Local/Remote switch.


Power Range1600-1900 bhp (1193-1417 bkW)
Speed Range2300 rpm
EmissionsEPA Tier 3, IMO II, EU IW
Bore5.71 in (145 mm)
Stroke6.38 in (162 mm)
Displacement1959 in³ (32.1 l)
Rotation from Flywheel EndCounterclockwise
ConfigurationVee 12, 4-Stroke-Cycle Diesel
Length82.9 in (2106 mm)
Width58.3 in (1482 mm)
Height56.9 in (1445 mm)
Dry Weight6780 lb (3075 kg)

Benefits and Features

U.S. EPA Tier 3 compliant

Extensive service network of dealers; Unparalleled service from authorized marine dealers

Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability

60 months standard warranty

Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump

Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler

Standard Equipment

  • Air Cleaner System with washable filter elements and fumes disposal (closed system)
  • Turbocharger, jacket water cooled
  • Turbocharger inlet, 152 mm (6 in) OD straight connection
  • Programmable Low Idle (550 - 750 rpm)
  • Electronic diagnostics and fault logging
  • Engine and transmission monitoring (speed, temperature, pressure)
  • Electronic fuel/air ratio control
  • Engine Protection Mode for extended ambient conditions
  • 70-pin customer connector (Upper front-facing customer wiring connector and Service Tool connection)
  • Throttle Input signal options
  • Sea Water Aftercooled Engine
  • Jacket water pump, gear driven
  • Sea water pump, rubber impeller, gear driven
  • Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) OD
  • Coolant recovery system
  • Water-cooled exhaust manifold & turbocharger
  • 4 Bolt 130 mm (5.12 in) diameter flanged outlet
  • Simplex Fuel Filters Spin-on, RH & LH service
  • Fuel connections size:
  • Plate Type Fuel Cooler (Jacket Heat Exchanger)
  • Fuel transfer pump, gear driven
  • Manual fuel priming pump
  • Hybrid fuel line design
  • Simplex Oil Filters, RH or LH service
  • RH or LH service oil filler locations
  • RH or LH service dipstick
  • Oil pump, gear driven
  • Shallow Sump
  • Front support - adjustable
  • Front Poly-V groove pulley (Quantity 1) for auxiliary drives
  • Lifting eyes
  • Front damper guard
  • RH or LH service options

Optional Equipment

  • Muffler
  • Muffler Spark Arresting
  • Battery Chargers
  • Charging Alternators
  • Ammeter
  • Water Separator
  • Instrument Panels
  • OEM Wiring Harness
  • Engine to Engine Harness
  • Gauges
  • Transmission Sensors
  • Exhaust Temperature Sensors
  • Transmission Oil Cooler
  • Adapter Kits
  • Isolator Mounts
  • Rear Hydraulic Pump Drive
  • Fuel and Oil Shielding
  • Electric Starting Motors - Single 24 Volt
  • Starting Aids - JW Heaters
  • Battery Sets - 24 Volt - Dry
  • Instrument Panels
  • Engine Protective Cover
  • Storage Preservation
  • Export Packing