Request Info

Contact Us For Price


Minimum Rating219 ekW
Maximum Rating940 ekW
ConfigurationVee-12, 4-stroke-Cycle-Diesel
Cat C32 Generator Set, IMO III emissions certified (SCR required)


Minimum Rating219 ekW
Maximum Rating940 ekW
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore5.71 in (145 mm)
Stroke6.38 in (162 mm)
Displacement1959 in³ (32.1 l)
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
EmissionsIMO III emissions certified (SCR required)
Oil Change Interval750 hrs
CoolingHeat exchanger, keel or radiator cooled
GovernorElectronic (A5 ECM)
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)
Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
Rated Engine Speed1500 rpm
GeneratorSR5 - Form Wound

Benefits and Features

Utilizes SCR Technology to enable IMO III emission regulations compliance while lowering operational costs

Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs; Extends emissions useful life; Ensures compliance; Flexible to urea quality

Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology

Industry leading power reserve

Wide range of available Marine Society certifications

Industry-leading warranty coverage for factory packaged components

Global dealer network for service in any location

Standard Equipment

  • Separate circuit aftercooled (SCAC)
  • Closed crankcase fumes disposal
  • 24V control system
  • Heat exchanger or Keel Cooling
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN
  • Primary fuel filter with water separator installed on base frame
  • Duplex fuel filters with hybrid fuel lines
  • IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
  • Oil fill, simplex filter and dipstick
  • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • Right or left hand service sides
  • Customer wiring and service tool connector

Optional Equipment

  • MGCPIIIB control panel with Cat® Alarm and Protection System
  • IP44 generator protection
  • Muffler
  • Water-in-fuel and exhaust temperature sensors
  • SOLAS approved spray shielding
  • Charging alternator
  • Manual or electric fuel priming pump
  • Fuel cooler
  • Duplex oil filters
  • Starting motors – air, electric or redundant