Request Info

SPECS SUMMARY

Minimum Rating219 ekW
Maximum Rating940 ekW
Frequency60hz
ConfigurationVee-12, 4-stroke-Cycle-Diesel
Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Specifications

Minimum Rating219 ekW
Maximum Rating940 ekW
Frequency60hz
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore5.71 in (145 mm)
Stroke6.38 in (162 mm)
Displacement1959 in³ (32.1 l)
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
EmissionsU.S. EPA Tier 3 / IMO II emissions certified
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)
CoolingHeat exchanger, keel or radiator cooled
GovernorElectronic (A4 ECM)
GeneratorSR5 - Form Wound
Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
Rated Engine Speed1800 rpm
Oil Change Interval750 hrs

Benefits and Features

Separate-circuit aftercooling – no sea water in aftercooler

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Industry leading power reserve

Wide range of available Marine Society certifications

Industry-leading warranty coverage for factory packaged components

Global dealer network for service in any location

Standard Equipment

  • Separate circuit aftercooled (SCAC)
  • 24V control system
  • Heat exchanger, keel or radiator cooled
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN
  • Duplex fuel filters with hybrid fuel lines
  • Fuel transfer and priming pump
  • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • Oil fill, simplex filter and dipstick
  • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • Right or left hand service sides
  • Customer wiring and service tool connector

Optional Equipment

  • Closed crankcase ventilation
  • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
  • IP44 generator protection
  • Muffler
  • SOLAS approved spray shielding
  • Charging alternator
  • EMCP 4.2 control panel
  • Installed primary fuel filter with water separator and manual or electric priming pump
  • Fuel cooler
  • Duplex oil filters
  • Starting motors – air, electric or dual