C32 ACERT™
Contact Us For Price
SPECS SUMMARY
| Maximum Rating | 1125 BHP (839 bkW) |
| Emissions | U.S. EPA Non-road Tier 4 Final |
| Displacement | 1958 in³ (32.1 l) |
| Minimum Rating | 1125 BHP (839 bkW) |
Specifications
| Maximum Rating | 1125 BHP (839 bkW) |
| Emissions | U.S. EPA Non-road Tier 4 Final |
| Displacement | 1958 in³ (32.1 l) |
| Minimum Rating | 1125 BHP (839 bkW) |
| Bore | 5.7 in (145 mm) |
| Stroke | 6.4 in (162 mm) |
| Rated Speed | 1800 r/min (1800 r/min) |
| Aspiration | Turbocharged-Aftercooled |
| Governor and Protection | ADEM A4 |
| Engine Weight - Net Dry | 6107 lb (2770 kg) |
| Minimum Cooling System - Engine Only | 15.9 gal (US) (60 l) |
| Oil Change Interval | 250 |
| Rotation from Flywheel End | Counterclockwise |
| Flywheel and Flywheel Housing | SAE No. 0 |
| Flywheel Teeth | 136 |
| Length | 85 in (2159 mm) |
| Width | 49 in (1253 mm) |
| Height | 63 in (1594 mm) |
Benefits and Features
- Designed to meet U.S. EPA Tier 4 Final emissions requirements. - On-engine NOx reduction system with optimized piston, ring, liner, and fuel system configuration to reduce NOx while minimizing in-cylinder sooting- Aftertreatment features diesel oxidation catalyst- Meets Tier 4 Final emissions requirements four years early, achieving environmental benefits earlier than required.
- Proven reliability and durability of engine and aftertreatment- Broad operating speed range- High power density- PTO drive options provide flexible access to auxiliary power for pumps and other needs
- Optimized fuel consumption- Maintenance-free aftertreatment
ADEM A4 control system providing integrated ignition, speed governing, protection, and controls. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.
For any petroleum application, trust Caterpillar to meet your exact needs with a factory custom package. Cat® engines, generators, enclosures, controls, radiators, transmissions, aftertreatment solutions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.
- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface.- C32 ACERT™ optimized Cat transmission match: TH48-E70
Every engine is full-load tested to ensure proper engine performance.
- More than 2,200 dealer outlets- Caterpillar factory-trained dealer technicians service every aspect of your petroleum engine- Caterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine
For all your petroleum power requirements, visit www.catoilandgas.cat.com.
Standard Equipment
- Twin side-mounted turbochargers, ATAAC
- Automatic altitude compensation; power compensation for fuel temperature; electronic diagnostics and fault logging; engine monitoring and protection system (speeds, temperature, pressure); J1939 Broadcast (diagnostic, engine status and control); ADEM A4 electronic control
- Thermostats and housing; jacket water pump, geardriven, centrifugal, RH
- Exhaust dry manifold, 127 mm (5 in) slip fit connection, diesel oxidation catalyst
- Mechanical Electronic Unit Injection (MEUI) system; primary, secondary, and tertiary fuel filter; electronic fuel priming pump-integrated with primary fuel filter base; fuel transfer pump
- Crankcase fumes filtration system, RH mounted; oil cooler — RH; oil filler — RH; oil level gauge — RH; shallow rear sump oil pan — 250-hour