Request Info

SPECS SUMMARY

Minimum Rating3000 BHP (2237 bkW)
Maximum Rating3300 BHP (2461 bkW)
EmissionsEPA Non-Road Tier 2, IMO II and China Stage III
Length111.3 in (2827 mm)
Well stimulation operations in the oilfield are complex and demanding. The 3516C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516C (HD) engines, with ratings: 2237-2461 bkW (3000-3300 bhp) @ 1900 rpm meet China Stage III and U.S. Non-road EPA Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Specifications

Minimum Rating3000 BHP (2237 bkW)
Maximum Rating3300 BHP (2461 bkW)
EmissionsEPA Non-Road Tier 2, IMO II and China Stage III
Length111.3 in (2827 mm)
Width70.6 in (1793 mm)
Height73.3 in (1862 mm)
Weight10590 lb (4803.6 kg)
AspirationTurbocharged-Aftercooled
Displacement3173 in³ (52 l)
Flywheel and Flywheel HousingSAE No. 0
Flywheel Teeth151
Stroke7.5 in (190 mm)
Bore6.7 in (170 mm)

Benefits and Features

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Large variety of factory-installed engine attachments reduces packaging time

Every engine is full-load tested to ensure proper engine performance.

More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment

  • Separate circuit aftercooler core — corrosion resistant coated (air side), air cleaner (single element w/service indicator)
  • Dual rear-mounted turbochargers
  • ADEM A3 ECU — LH
  • Electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control unit)
  • Torque converter connections
  • Thermostats and housing, jacket water pump, gear-driven centrifugal
  • Connections for radiator cooling
  • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
  • Separate Circuit Aftercooler (SCAC)
  • Exhaust manifold — dry, stainless steel bellows
  • Dual turbochargers with watercooled bearings
  • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP, 376 mm bolt hole dia.
  • Flywheel, SAE No. 0 — 151 teeth
  • Flywheel housing — SAE No. 0
  • Primary fuel filter
  • Fuel priming pump
  • Fuel filter — RH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors
  • No standard instrumentation
  • Optional, remote instrumentation available
  • Service meter
  • Crankcase breather — top-mounted
  • Oil cooler
  • Oil filler and dipstick — RH
  • Oil pump
  • Oil filter — RH spin-on type
  • Rear sump oil pan, 250-hour change interval
  • Oil pan drain valve — 3/4" NPT female connection
  • Trunion front support
  • Front housing — two-sided
  • ADEM A3 ECU system to provide customer-programmable engine deration strategies to protect against adverse operating conditions
  • Emergency stop logic inputs provided at 40-pin customer interface connection
  • Air inlet shutoff
  • Paint — Cat yellow
  • Vibration damper and guard
  • Lifting eyes
  • B-Series LAND

Optional Equipment

  • Air cleaner and air cleaner mounting
  • Remote air inlet adapters
  • Air inlet heater
  • Battery chargers
  • Charging alternators
  • Local speed throttle control
  • Throttle position sensors
  • Load sharing modules
  • Governor conversion
  • High gloss black folded core radiators
  • Coolant regulator conversion
  • Belt guard and radiator guard
  • Blower fan
  • Radiator cover
  • Fan drive and fan pulleys
  • Water level switch gauge
  • Coolant level sensors
  • Coolant conditioner
  • Expansion tank
  • Heat exchanger cooling conversion
  • Auxiliary water pump
  • Air separator
  • IMO Certification and European Union Certification
  • Flexible exhaust fitting
  • Elbows and flange
  • Flange and exhaust adapters
  • Manifold and mufflers
  • Flexible fuel lines
  • Fuel cooler
  • Water/fuel separator
  • Fuel level switch
  • Customer management device
  • Remote panel display and remote cylinder temperature display
  • Switches and contactors
  • Gauges and instrument panels
  • Fumes disposal
  • Oil pans
  • Prelube options
  • Sump pumps
  • Oil Filters
  • Base remova
  • Vibration isolators
  • Rails
  • Front housing
  • Flexible couplings
  • Coupling hub
  • Front accessory drives
  • Auxiliary drive shaft
  • Auxiliary drive pulleys
  • Front stub shaft
  • Damper guard removal
  • Pulleys
  • Flywheel stub shaft
  • Marine society conversion
  • Spray shielding
  • Shutoffs
  • Switches and contractors
  • Explosion relief valve
  • Sensors
  • Oil pressure monitor
  • Shutoff controls
  • Corrosion protection
  • Air starting motors — electric
  • Air pressure regulator
  • Air silencer
  • Hydraulic starter
  • Air start controls — manual, electric
  • Redundant start
  • Starting aids
  • Battery sets - 24V
  • Battery cable and battery rack