C13 ACERT™ (Dry Manifold)

SPECS SUMMARY

Maximum Rating	520 BHP (387 bkW)
Emissions	EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Displacement	760 in³ (12.5 l)
Minimum Rating	385 BHP (287 bkW)

Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C13 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C13 ACERT™ Industrial Diesel Engine. Ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards.

Specifications

Maximum Rating	520 BHP (387 bkW)
Emissions	EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Displacement	760 in³ (12.5 l)
Minimum Rating	385 BHP (287 bkW)
Length	47.3 in (1201 mm)
Width	39.9 in (1013 mm)
Height	46.7 in (1186 mm)
Weight	1976 lb (896 kg)
Governor and Protection	Electronic (ADEM™ A3)
RPM	2100 r/min (2100 r/min)
Aspiration	Turbocharged-Aftercooled
Flywheel and Flywheel Housing	SAE 1
Flywheel Teeth	113
Rotation from Flywheel End	Counterclockwise
Stroke	6.2 in (157 mm)
Bore	5.1 in (130 mm)
Lube Oil System - Refill	9 gal (US) (34 l)
Cooling System	3.8 gal (US) (14.4 l)

Benefits and Features

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Custom Packaging

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time

Testing

Every engine is full-load tested to ensure proper engine performance.

Product Support Offered Through Global Cat Dealer

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Standard Equipment

Air Inlet System

Turbocharger, mid-mounted
Air inlet elbow 90°, 104.5 mm (4.11" OD) hose connection

Control System

Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring system — speed, temperature, pressure
J1939 Broadcast — diagnostic and engine status

Cooling System

Thermostats and housing
Jacket water pump — gear-driven
Front water pump inlet

Exhaust System

Exhaust manifold — dry
Front turbo exhaust

Flywheels and Flywheel Housings

See Mandatory Options

Fuel System

Electronic unit injector
Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
Fuel transfer pump — front
Fuel priming pump — LH mid-mount
Fuel fitting — fuel return connection: straight No. 8, 5/8-18

Lube System

Crankcase breather
Oil cooler
Oil filter — RH
Oil pan — front sump, 40 L capacity
Oil filler — LH front
Oil dipstick — LH front
Oil pump
Oil valve sampling — RH rear engine side

Power Take-Offs

Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
Hydraulic pump drive — SAE A, 11-tooth
1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity)