C18 ACERT™ (Dry Manifold)
Contact Us For Price
SPECS SUMMARY
| Maximum Rating | 800 BHP (596 bkW) |
| Emissions | EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA |
| Displacement | 1100 in³ (18 l) |
| Minimum Rating | 575 BHP (429 bkW) |
Specifications
| Maximum Rating | 800 BHP (596 bkW) |
| Emissions | EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA |
| Displacement | 1100 in³ (18 l) |
| Minimum Rating | 575 BHP (429 bkW) |
| Length | 54.7 in (1389 mm) |
| Width | 36.2 in (919 mm) |
| Height | 49.5 in (1227 mm) |
| Weight | 2807 lb (1273 kg) |
| Governor and Protection | ADEM A3 |
| Aspiration | Turbocharged-Aftercooled |
| Flywheel and Flywheel Housing | SAE No. 0 or SAE No. 1 |
| Flywheel Teeth | 136 (SAE No. 0), 113 (SAE No. 1) |
| Rotation from Flywheel End | Counterclockwise |
| Stroke | 7.2 in (183 mm) |
| Bore | 5.71 in (145 mm) |
| Cooling System | 13.2 gal (US) (50 l) |
Benefits and Features
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenance.
Large variety of factory-installed engine attachments reduces packaging time
Every engine is full-load tested to ensure proper engine performance.
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
For all your petroleum power requirements, visit www.cat.com/oilandgas
Standard Equipment
- Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), hose connection
- Dual turbocharger, front and rear inlet 127.0 mm (5 in.), hose connection
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
- Thermostats and housing — outlet vertical
- Jacket water pump — gear-driven, centrifuga
- RH front water pump inlet
- All plugs/fittings are STOR for lines gp water
- Exhaust manifold — dry
- Single turbo — front-facing turbo exhaust, full marmon connection, maximum load 10 kg for direct connection to turbo
- Dual turbo — exhaust elbow, dry 203 mm (8 in)
- See Mandatory Options
- Electronic unit injector
- Fuel filter, secondary, mid-mount (LH 2 micron high performance)
- Fuel transfer pump, LH front
- Fuel priming pump, LH mid-mount
- Fuel sample valve, mounted on fuel filter base.
- Crankcase breather — rear valve cover
- Oil cooler — RH (dual)
- Oil filter — RH, LH
- Oil pan — front sump
- Oil dipstick — LH front
- Oil pump
- Front support (shipping only)
- Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width
- Hydraulic pump drive, SAE A, 11-tooth
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
- Throttle position sensor
- Single turbo only — exhaust system (front or rear)
- Flywheel housing or rear PTO
- Primary filter/water separator
Optional Equipment
- Air compressor governor
- Expansion chambers
- Air cleaners
- Air lines
- Charging alternators
- Alternator mountings
- Alternator wiring
- Circuit breakers and mountings
- Alternator belt guard
- Radiator
- Fan drive with radiator packages
- Fan height instructions
- Vee belts
- Aftercooler lines with Caterpillar installed radiator
- Single turbo configuration rear-facing exhaust
- Single turbo configuration rear-facing exhaust
- Aftercoooler lines
- Suction fan adapters
- Blower fan adapter
- Blower fan
- Suction fan
- Fan belt
- Coolant level sensor
- Dry charge coolant conditioners
- Turbo exhaust connection
- Flexible fittings
- Elbows, flange, clamp, pipes
- Exhaust adapters
- Manifold
- Mufflers
- Flexible fuel lines
- Fuel filter location
- Fuel cooler
- Water separator
- Gauges and instrument panels
- Oil pans
- Drain and cover
- Oil level gauge
- Remote oil filters
- Oil filters
- Lubricating oils
- Structural steel base
- Front and rear engine support
- Rear enclosed clutches
- Hydraulic pump drives
- Hydraulics gear pumps
- Clutch supports
- Crankshaft pulleys
- Air shutoff
- Air starting motors
- Air pressure regulator
- Air silencer
- Start switch
- Electric starting motors — 12V, 24V
- Battery sets - 24V
- Battery cable and rack
- Starting aids
- Transmission water lines