C27 ACERT™ (Dry Manifold)

SPECS SUMMARY

Maximum Rating	1050 BHP (782 bkW)
Emissions	2006 EPA and CARB Tier 2, and EC Stage II Non-Road emissions certified
Displacement	1658 in³ (27.2 l)
Minimum Rating	800 BHP (596 bkW)

Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C27 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C27 ACERT engines, with ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 2 equivalent emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.

Specifications

Maximum Rating	1050 BHP (782 bkW)
Emissions	2006 EPA and CARB Tier 2, and EC Stage II Non-Road emissions certified
Displacement	1658 in³ (27.2 l)
Minimum Rating	800 BHP (596 bkW)
Length	75.5 in (1918 mm)
Width	57.6 in (1463 mm)
Height	52 in (1321 mm)
Weight	6382 lb (2895 kg)
Governor and Protection	ADEM A3
Aspiration	Turbocharged-Aftercooled
Flywheel and Flywheel Housing	SAE No. 0 or SAE No. 1
Flywheel Teeth	136 (SAE No. 0), 113 (SAE No. 1)
Rotation from Flywheel End	Counterclockwise
Stroke	6 in (152.4 mm)
Bore	5.4 in (137.7 mm)
Cooling System	14.5 gal (US) (54.9 l)

Benefits and Features

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Custom Packaging

Transmissions

Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenance

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time

Testing

Every engine is full-load tested to ensure proper engine performance.

Product Support Offered Through Global Cat Dealer

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval

Standard Equipment

Air Inlet System

Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection

Control System

Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring and protection system (speed, temperature, pressure)
J1939 Broadcast (diagnostic, engine status, and control)

Cooling System

Thermostats and housing — outlet LH vertical orientation
Jacket water pump — gear-driven, centrifugal RH

Exhaust System

Exhaust manifold — dry, heat shields
Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
Water-cooled center sections